Ricoh D037 Service Manual page 632

System Service Mode
017 Paper Transfer: Normal: S5
[SP4: L-Edge Correct] Special 4 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2783 and SP2787 are multiplied by these SP values.
2795
Normal: 120 mm/sec, Low: 60 mm/sec
The paper leading edge area can be adjusted with SP2796.
001 Paper Transfer
[SP 4: Switch Timing: L-Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2796
plate at the paper leading edge between the erase margin area and the image
area.
Normal: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer
[SP4: T-Edge Correct] Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2783 and SP2787 are multiplied by these SP values.
2797
Normal: 120 mm/sec, Low: 60 mm/sec
The paper trailing edge area can be adjusted with SP2798.
001 Paper Transfer
2798 [SP 4: Sw Timing: T-Edge]
D037/D038/D040/D041
194 mm ≥ S4 size ≥ 150 mm (Paper
width)
[1 to 50 / 6 / 1%/step]
*ENG
150 mm ≥ S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG [0 to 400 / 100 / 5%/step]
9-98 SM Appendix