HP ProLiant WS460c Gen9 Maintenance And Service Manual page 62

Install the processor. Verify that the processor is fully seated in the processor retaining bracket by
1.
visually inspecting the processor installation guides on either side of the processor. THE PINS ON
THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED. To avoid damage to the system board, do not touch the processor or the
processor socket contacts.
CAUTION: Do not press down on the processor. Pressing down on the processor may
cause damage to the processor socket and the system board. Press only in the area
indicated on the processor retaining bracket.
Close the processor retaining bracket. When the processor is installed properly inside the
2.
processor retaining bracket, the processor retaining bracket clears the flange on the front of the
socket.
Removal and replacement procedures 62