Access Panel (Graphics Server Blade); Expansion Blade Access Panel; Expansion Blade Pcie Card Cage - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Access panel (graphics server blade)

To remove the component:
Power down the graphics server blade (on page 25).
1.
Remove the graphics server blade
2.
Press the access panel release button.
3.
Slide the access panel towards the rear of the graphics server blade, and then lift to remove the
4.
panel.
To replace the component:
Place the access panel on top of the graphics server blade.
1.
Slide the access panel forward until it clicks into place.
2.

Expansion blade access panel

To remove the component:
Power down the graphics server blade (on page 25).
1.
Remove the graphics server blade
2.
Place the graphics server blade on a flat, level work surface.
3.
Remove the access panel.
4.
To replace the component, reverse the removal procedure.

Expansion blade PCIe card cage

To remove the component:
Power down the graphics server blade (on page 25).
1.
Remove the graphics server blade
2.
Place the graphics server blade on a flat, level work surface.
3.
Remove the expansion blade access panel
4.
Remove the expansion module front bezel (on page 29).
5.
("Remove the graphics
("Remove the graphics
("Remove the graphics
("Expansion blade access
blade" on page 26).
blade" on page 26).
blade" on page 26).
panel" on page 31).
Removal and replacement procedures 31