HP ProLiant WS460c Gen9 Maintenance And Service Manual page 47

Verify that the air flow impedance control labels cover the three openings on each end of the I/O
6.
plate.
Install the new graphics card into the card cage.
7.
Install the expansion blade PCIe card cage.
8.
Install the retaining block.
9.
Install the graphics expansion control cable.
10.
Connect the power cable to the expander power board and the PCI graphics option.
11.
Install the foam gasket.
12.
Install the expansion module front bezel.
13.
Install the access panel
14.
Install the graphics server blade.
15.
Power up the graphics server blade.
16.
Download and install the latest drivers from the following websites:
17.
Hewlett Packard Enterprise website (http://www.hpe.com/info/hpesc)
o
("Access panel (graphics server blade)" on page 31).
Removal and replacement procedures 47