Redial - Panasonic KX-TD500 Features Manual

Redial

Description
"Redial" feature can be categorized as the following two types.
Type
Last Number
Saved Number
Conditions
[General]
• Up to 24 digits (excluding the CO line access code) can be stored and redialed.
• If "Full One-Touch Dialing" feature is enabled at the extension, there is no need to go off-
hook, before pressing the REDIAL or SAVE button.
[Last Number]
• The memorized telephone number is replaced by a new one if at least one digit sent to a CO
line is dialed. Dialing a CO line access code alone does not change the memorized number.
[Saved Number]
• SAVE button
If the SAVE button is not provided on your PT, it is possible to assign a flexible button (CO,
DSS, PF) to the SAVE button by Station, User or System Programming.
Programming Guide References
• 2.3 Numbering Plan
– Redial
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide
Saves the last telephone number dialed to a CO line or while
hearing a busy tone and allows the extension user to dial the
same number again.
Allows the PT user to save a telephone number while in
conversation on a CO line or while hearing a busy tone and
redial the number afterwards. The saved number can be redialed
until another number is stored.
Description
General Features
211