Walking Station - Panasonic KX-TD500 Features Manual

Walking Station

Description
Used to move an extension to a new location without re-programming. Extension data such as
extension number, One-Touch dialing memory remain the same after the re-location of the
extension.
Conditions
• The telephone type (PT, SLT, OPX) must be the same at the source and destination.
• Walking Station is not available in the following cases:
– If the extension is connected to a DHLC card (KX-TD50170).
– If the extension is connected to a HLC card (KX-T96170) in parallel.
– If the extension is in hands-free mode.
• The status of the port must be INS (In-Service) at the source and destination.
• When the destination extension is in one of the following states,
shown on the display.
– Off-hook, incoming call
– Call Hold
– All buttons on PT are in use
• When you reset the system during this process, the setting is canceled.
Programming Guide References
• 2.3 Numbering Plan
– Walking Station
Features Guide References
None
User Manual References
• 4.3.85 Walking Station
Features Guide
General Features
Try Again
is
111