Selecting High Balance Point Option - Robertshaw Smart Sense SMART 1000 Installation Manual

INSTALLER SET-UP MENU

SELECTING HIGH BALANCE POINT OPTION

Menu 17 allows you to select a high balance point setting when the thermostat is
configured for Heat Pump or Fossil Fuel. When the outdoor temperature rises
above the balance point setting, the auxiliary electric heat or fossil fuel furnace is
locked out and only the heat pump is used for heating. The factory default is
OFF. Touch the UP or DOWN arrows to select a low balance point setting.
Next
Back
Adjustable from OFF, -18° to 50°C
Remote outdoor sensor must be used
38