Selecting Third Stage Heating Differential Option - Robertshaw Smart Sense SMART 1000 Installation Manual

INSTALLER SET-UP MENU

SELECTING THIRD STAGE HEATING DIFFERENTIAL OPTION

Menu 13 is used to adjust the third stage heating differential. Only displayed
when SW 3 is ON. The factory default is 1 =1°F ( 0.5°C). This represents the
temperature below the second stage heating differential when third stage heat is
energized. There is a 3 minute time delay before third stage heat is energized.
Touch the UP or DOWN arrows to change the differential.
Next
Back
Adjustable from 1 - 5°C in 0.5°C increments
34