Installation - Mitsubishi L3E Service Manual

ENGINE MAIN PARTS
Figure 47 Inspecting valve
Press this surface
ø14.8 mm [0.5827 in.]
Driving in stem seal
Figure 48 Installation of valve spring
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
10.3.1 Repair of valve face
If the valve face is found worn, resurface with a valve
refacer. If margin of the resurface valve is less than the
service limit, replace the valve.
10.3.2 Repair of valve stem end
Margin
If the valve stem end is indented by wear, flatten with
an oil stone.

10.4 Installation

1.
2.
3.
Press the retainer and push the
spring to install retainer lock.
Installing spring
Be careful not to damage the spring and stem seal by
excessively pushing the spring when installing the
valve spring.
ENGLISH
VALVES AND VALVE SPRINGS
Reassemble the valves and valve springs,
referring to the illustrations shown below.
Mount the cylinder head assembly.
Adjust the valve clearances.
Installing spring retainer
CAUTION
51 / 155