Mitsubishi L3E Service Manual page 20

MAINTENANCE
Figure 7 Oil filter
20 / 155
API
classification
Class CF
or CF-4
Table 4 API classification
5.1.4 Replacing the oil filter
When replacing the oil filter, use only the genuine
replacement filter.
5.1.5 Changing the oil
To change oil, first warm up the engine and remove the
drain plug to let oil drain completely. Put back the drain
plug and refill the oil pan with fresh engine oil through
the oil filler.
Tightening torque N·m (kgf·m) [lbf·ft]
Description
Oil pan drain plug
tightening torque
Table 5 Tightening torque
Oil capacity (Upper
limit/Lower limit)
(excluding 0.5 l of
oil filter capacity)
1 [U.S.gal]
Table 6 Oil capacity
5.1.6 Replacing the oil filter
Procedure
1. Remove the oil filter with a filter wrench or the like.
ENGLISH
Atm. temperature
Above 20°C [68°F]
5° to 20°C [41 to
68°F]
Below 5°C [41°F]
All seasons
Standard
49.0 to 58.8 (5.0 to 6.0)
[36.17 to 43.40]
L2
2.4/1.4 Ordinary type 3.0/1.5
[0.6341/ [0.7926/0.3963]
0.3699] Deep type 3.6/1.8
[0.9511/0.4756] or
4.8/3.0 [1.2682/
0.7926]
Service Manual Mitsubishi L-Series diesel engines
GENERAL
Viscosity
SAE30
SAE20
SAE10W-30
SAE10W-30
L3
Version 08/2004