Fax Screen - Konica Minolta bizhub 600 User Manual

2
2.5

FAX Screen

The FAX screen is displayed when the FAX key is pressed on the control pan-
el. The FAX screen contains [Program], [Group], [Address Book] or [Direct In-
put].
15
No. Name
1 Job List
2 Program
3 Group
4 Address Book
5 Direct Input
6 No. of Dest.
7 Memory
8 Off-Hook
9 Name
10 Page Indicator
11 Page List
12 Scan Setting
13 Comm. Setting
2-14
1 2
Dest.
3 4 5
14
Description
The list of the jobs in the queue for execution, the job
history, and the error jobs is displayed.
Displays Program select screen.
Displays Group select screen.
Displays Address Book select screen.
A screen is displayed in which dialing is made by using
a special symbol such as a tone and a pause. Pressing
[Scan to E-Mail] allows you to display the keyboard
screen in which the E-Mail address is entered.
The number of destinations to which transmission has
been set is displayed.
The remaining amount of memory to be used while in
operation is displayed.
Press when you want to TX/RX a fax manually. When
you press this key, a signal noise sounds.
The display can be switched between the Name and
the telephone number of the destination that is being
displayed.
The page of the list of Program Destination is dis-
played.
The page of the list of Program Destination can be
specified.
The menu is displayed in which a method to read an
original, such as Original Image Type, Resolution or
Application, is set.
The menu is displayed in which a method for commu-
nication such as Timer TX or Polling RX is set.
Before Use
6
7
8
9
10
11
12
13
bizhub 750/600