Konica Minolta bizhub 600 User Manual page 280

Utility Mode
5
Select [ON] for [PC-Fax RX Setting].
– The displays are different depending on the country.
– OFF:
– ON:
6
For [RX- Output], select a box into which a document received by the
PC-FAX RX feature is stored.
– Fixed Box:
– Specified Box:
– When you want to stop the setting, press [Cancel].
– For the operations while in the reception of the PC-FAX RX feature,
see "Operations of the PC-FAX RX feature" (p. 2-21).
7
Press [OK] and then press [Close].
The setting is changed and you return to the Utility Mode screen.
bizhub 750/600
The PC-FAX RX feature is not available.
The PC-FAX RX feature is made when either of the fax
number and the PC-Fax number is received, and a
document received is stored in the specified box.
a received file is sent to Memory RX User Box.
a received file is sent to a box specified by F Code
(SUB).
11
11-45