Konica Minolta bizhub 600 User Manual page 162

Transmission Applications
4
Press [ECM OFF].
– To release the setting, press [ECM OFF] again.
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
7
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-10 for informa-
tion about setting functions in the FAX screen. See "Application
Functions Overview" on page 7-4 for information about setting
functions in the Fax Application Menu.
8
Designate the destination.
– See "Selecting One Destination" on page 3-19 for designating the
destination.
9
Set the original document.
– See "Placing Originals on the Platen Glass" on page 3-6 for infor-
mation about setting the document.
10
Press [Start].
The FK-502 starts transmission.
!
Detail
To cancel transmission, see "Canceling Transmission" on page 3-32.
If the destination is not ready to receive, your call will be redialed. For in-
formation about redialing, see "Manual Redialing" on page 3-27.
If transmission fails, refer to "Cannot Send Messages" on page 5-2.
bizhub 750/600
7
7-41