Konica Minolta bizhub 600 User Manual page 210

Registering/Settings
– See "Registering the E-Mail for the Address Book" on page 10-7 for
entering the Boxes.
– See "Registering the Box for the Address Book" on page 10-10 for
entering the E-Mail addresses.
7
When setting [Scan Setting] or [Comm. Setting], press [Yes] to set the
scanning or communication function and then press [OK].
– In the screen displayed by pressing [Comm. Setting] - [E-Mail Set-
ting], [E-Mail Notification] can be set.
– When [E-Mail Notification] is set to [ON], after completion of the job,
the end of the job can be confirmed by sending an E-Mail to the
destination of [E-Mail Notification].
– For details of [Scan Setting], [Comm. Setting], see "Transmission
Applications" on page 7-2.
8
Press [Close].
– To stop registering, Press [Cancel].
When proceeding with the registration of the Program, go to Step 3.
9
Press [Exit] on the sub-area.
bizhub 750/600
10
10-25