Shortcuts - Panasonic WV-CW590G Operating Instructions Manual

Shortcuts

Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button.
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the
camera to a preset position by inputting the applicable position number on the 10-key pad.
Notes:
• Turn off digital flip before registering preset positions. If NO REGS.; FLIP ON appears, do the setting again.
• Shortcuts may not be performed if they are executed while a pan, tilt, zoom, or focus operation is in progress.
• Shortcuts 1 through 64, 169, 170, and 301~556 can be saved as part of a patrol routine.
• Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY
operation to stop.
Controller Operation
[6] + [5] + [CAM FUNCTION]
[6] + [6] + [CAM FUNCTION]
[6] + [7] + [CAM FUNCTION]
[6] + [8] + [CAM FUNCTION]
[6] + [9] + [CAM FUNCTION]
[7] + [0] + [CAM FUNCTION]
[7] + [1] + [CAM FUNCTION]
[7] + [2] + [CAM FUNCTION]
[7] + [3] + [CAM FUNCTION]
[7] + [4] + [CAM FUNCTION]
[7] + [6] + [CAM FUNCTION]
[7] + [7] + [CAM FUNCTION]
[7] + [8] + [CAM FUNCTION]
[7] + [9] + [CAM FUNCTION]
[8] + [0] + [CAM FUNCTION]
[8] + [1] + [CAM FUNCTION]
[8] + [4] + [CAM FUNCTION]
[8] + [5] + [CAM FUNCTION]
[8] + [6] + [CAM FUNCTION]
[8] + [8] + [CAM FUNCTION]
[8] + [9] + [CAM FUNCTION]
[9] + [0] + [CAM FUNCTION]
[9] + [1] + [CAM FUNCTION]
[9] + [2] + [CAM FUNCTION]
[9] + [3] + [CAM FUNCTION]
[9] + [4] + [CAM FUNCTION]
[9] + [5] + [CAM FUNCTION]
[9] + [6] + [CAM FUNCTION]
[9] + [7] + [CAM FUNCTION]
[1] + [0] + [0] + [CAM FUNCTION]
[1] + [0] + [1] + [CAM FUNCTION] ~
[1] + [6] + [4] + [CAM FUNCTION]
[1] + [6] + [5] + [CAM FUNCTION]
[1] + [6] + [6] + [CAM FUNCTION]
[1] + [6] + [7] + [CAM FUNCTION]
[1] + [6] + [9] + [CAM FUNCTION]
Setting
AUTOPAN ON
AUTOPAN OFF
Increases AUTOPAN speed one step.
Decreases AUTOPAN speed one step.
Sets AUTOPAN start point.
Sets AUTOPAN end point.
AUTO MODE: OFF
AUTO MODE: SEQ ON
AUTO MODE: SORT ON
Reverses AUTOPAN range.
ENDLESS: ON
ENDLESS: OFF
DIGITAL FLIP: ON
DIGITAL FLIP: OFF
PROPO.P/T: ON
PROPO.P/T: OFF
SUPER-D6: ON
SUPER-D6: OFF
AF MODE: AUTO
Performs auto focus.
Moves to home position.
BW: ON
BW: OFF
BW: AUTO
CAMERA ID: ON
CAMERA ID: OFF
AREA TITLE: ON (NESW)
AREA TITLE: ON (USER)
AREA TITLE: OFF
Adjusts camera position (REFRESH)
Registers a position to a preset number (1 to 64).
PATROL1: PLAY
PATROL1 - PATROL4: STOP
PATROL1: LEARN start
IRIS: OPEN
29