Konica Minolta IP-601 Instruction Manual page 58

Chapter 3 Printer Driver Functions
Scaling
Select the enlargement or reduction rate of image in 1% by entering the value
from 10 to 400 into the text box.
Default is [100]%.
Resolution
Select [400 x 400] or [600 x 600] by clicking the radio button.
[400 x 400] prints documents with 400 dot per inch (dpi).
[600 x 600] prints documents with 600 dot per inch (dpi).
TrueType options
Select [Outline soft fonts], [Bitmap soft fonts] or [Rasters] by clicking the radio
button.
[Outline soft fonts] prints documents using a TrueType font which downloaded
from your computer using Outline data format.
[Bitmap soft fonts] prints documents using a TrueType font which downloaded
from your computer using bitmap data format.
[Rasters] is selected, all text and font data is converted in the computer into
Raster graphics and downloaded to the printer.
Chapter
When [Chapter] is checked, you can chapter by the specified page in the [Pages]
box.
The specified page in the [Pages] box means the first page of a chapter.
On [Duplex] printing, [Chapter] prints the specified page to the front of paper, if
the page has an even number which would be printed to the back of paper on
duplex printing. (In case of that an even number is specified, [Chapter] inserts a
blank page before the specified page.)
[Chapter] is on;
[Duplex] - [Flip on short edge]
3-32 Print Controller INSTRUCTION MANUAL
[Duplex] - [Flip on long edge]
end of a chapter
1'st page of a chapter
an inserted
blank page