Table of Contents
Advertisement
Chapter 3 Printer Driver Functions
Features - Punch
[Left], [Top] makes each punched set of copies and outputs to the tray of the
finisher.
Punching is performed as shown for the following orientations:
Left (Portrait)
Top (Portrait)
[Punch] can not be performed in the following cases:
• When Finisher is not available
• When [5.5" x 8.5"], [8.5" x 14"], [A5], [A6], [F4], or wide paper is selected in
[Paper size]
• When [OHP (Transparency)], [OHP-Interleaved (Blank)], [OHP-Interleaved
(Print)] is selected in [Media Type]
• When [Collate] is not selected in [Copies]
• When settings other than [None] are selected in [Features] - [Fold & Stitch]
• When [Sub Tray] is selected in [Output Tray]
• The following combination is selected
e.g., [Staple - Top] and [Left]
Refer to the copier manual for more details on the stapling and punching
combination.
3-22 Print Controller INSTRUCTION MANUAL
Left (Landscape)
Top (Landscape)
Advertisement
Table of Contents
