Table of Contents
Advertisement
Chapter 2 Printer Driver Setup
6.
Click the [Have Disk] button.
The [Install From Disk] window will appear.
7.
Click the [Browse] button.
The [Open] window will appear.
8.
Set the "User Software CD" on the CD-ROM drive.
9.
Select the [oemsetup.inf] file in the "\PCL\English\Win9x" folder of the
"User Software CD" and click the [OK] button.
The [Install From Disk] window will appear.
10. Click the [OK] button.
The next [Add Printer Wizard] window to select the printer manufacturer and model
will appear.
11. Be sure that in the list of [Printers], [Konica IP-601 PCL] is highlighted,
then click the [Next] button.
The next [Add Printer Wizard] window to assign a port will appear.
12. Select the port to which the printing system is connected and click the
[Next] button.
Select LPT port when the printing system is used as a local printer.
The next [Add Printer Wizard] window to specify the printer name will appear.
13. Specify the printer name and click the [Next] button.
Default: [Konica IP-601 PCL]
The next [Add Printer Wizard] window to perform the test page will appear.
14. Select whether you will perform the print test or not.
Select [Yes (recommended)] to perform the test page, or select [No] not to perform it.
15. Click the [Finish] button.
Necessary files will be copied from the "User Software CD" to complete the installa-
tion.
The printer driver of the printing system becomes available without restarting
your computer.
2-4 Print Controller INSTRUCTION MANUAL
Advertisement
Table of Contents
