Ekc Limit - Konica Minolta IP-601 Instruction Manual

EKC Limit

If you try to exceed the limit previously set in Printer EKC, the following will occur
depending on the settings of Printer EKC.
When in doubt about the Printer EKC settings, ask your system administrator.
When a print job is transmitted after reaching a limit:
• A message will appear indicating that the EKC counter reached a preset limit,
but the printing process is brought about normally and the EKC counter
increments as if nothing happened.
• No output is produced and the job is registered on the Unsuccessful jobs list.
If the EKC counter hits a preset limit in the process of getting an output:
• A message will appear indicating that the EKC counter reached a preset limit,
but the printing process is brought about normally and the EKC counter
increments as if nothing happened.
• After the current print job is completed, no additional jobs are accepted. If you
try to transmit the next print job, it is deleted and registered on the
Unsuccessful jobs list.
• The print job instantly stops, causing the already fed paper to be output. The job
is registered on the Unsuccessful jobs list.
A print job deleted by the Printer EKC feature is registered on the
Unsuccessful jobs list. For information on checking the Unsuccessful jobs
list screen, refer to " Appendix A Troubleshooting ".
Chapter 6 Printer EKC
Print Controller INSTRUCTION MANUAL 6-3