Konica Minolta IP-601 Instruction Manual page 23

Selecting [Network]
When personal computers or workstations are connected to the network
and you want to print via the network, connect to the optional network
interface card and select [Network printer] (Windows 2000) / [Network
printer server] (Windows NT4.0).
For a [Network printer] (Windows 2000) / [Network printer server] (Win-
dows NT4.0), type the network path or queue name and click the [Next]
button. If you don't know its name, click the [Browse] button to view
available network printers then follow steps 7 to 20.
7. Select or create the Printer Port to install the printer controller and click
the [Next] button.
The next [Add Printer Wizard] window will appear.
8. Click the [Have Disk] button.
The [Install From Disk] window will appear.
9. Click the [Browse] button.
The [Open] window will appear.
10. Set the "User Software CD" on the CD-ROM drive.
11. Select the [oemsetup.inf] file in the "\PCL\English\WinNT&2000" folder
of the "User Software CD" and click the [OK] button.
The [Install From Disk] window will appear.
12. Click the [OK] button.
The next [Add Printer Wizard] window to select the manufacturer and model of the
printer will appear.
In the list of [Printers], [Konica IP-601PCL] will be highlighted.
13. Click the [Next] button.
The next [Add Printer Wizard] window to specify the printer name will appear.
14. Specify the printer name and click the [Next] button.
Default: [Konica IP-601 PCL]
The next [Add Printer Wizard] window to perform the test page will appear.
15. Select [Do not share this printer] (Windows 2000) / [Not shared] (Win-
dows N4.0) or [Share as] (Windows 2000) / [Shared] (Windows N4.0) by
clicking.
In case of [Share as] (Windows 2000) / [Shared] (Windows N4.0), specify
the share name of the printer.
Default: [Konica IP]
Chapter 2 Printer Driver Setup
Print Controller INSTRUCTION MANUAL 2-7