Troubleshooting
4.2.7
Clearing a paper misfeed in the ADF (turnover section)
!
Detail
For details on the positions of paper misfeeds, refer to
1
Remove all original pages remaining in the original feed
tray.
2
Raise the original feed tray as far as possible, and then
remove all original pages from the original output tray.
3
Raise the original output tray as far as possible, and then pull out any misfed original pages.
–
Raise the original feed tray as far as possible, and
then raise the original output tray as far as possible.
C353/C253/C203
"Paper misfeed indications" on page
4
4-5.
4-18