Inside Of Machine - Konica Minolta BIZHUB C203 User Manual

Before making copies
No. Part name
36 Network connector
(10Base-T/100Base-
TX/1000Base-T)
37 ADF connector
38 Finisher connector
39 Ozone filter
40 Power cord
1.1.3

Inside of machine

No. Part name
1 Original glass
2 Fusing unit upper cover
3 Fusing cover lever M2
4 Upper right-side door
5 Unlock lever
6 Imaging unit
7 Charger-cleaning tool
8 Print head glass cleaning
tool
9 Waste toner box
10 Main power switch
11 Total counter
12 Lock tub
13 Toner cartridges
14 Left partition glass
15 Original scales
C353/C253/C203
Description
Used for connecting the network cable when this machine is used for network
printing and network scanning.
Used for connecting the ADF hookup cord.
Used for connecting the finisher hookup cord.
Collects the ozone generated in the machine.
Supplies power to the machine.
16
13
15
14
12
10
11
9
8
Description
The original placed on the glass is scanned.
Opened when cleaning paper misfeeds in the fusing unit.
Opened when cleaning paper misfeeds in the fusing unit.
Opened when clearing paper misfeeds from inside the main unit.
Used when removing an imaging unit.
Creates the print image.
Used to clean the electrostatic charger wire, for example, when incorrect cop-
ies are produced.
Used to clean the surface of the print head glass, for example, when replacing
the imaging unit.
Collects used waste toner.
Used to turn the machine on and off.
Shows the total number of pages that have been printed.
Used when removing the toner cartridge.
There are four toner cartridges: cyan (C), magenta (M), yellow (Y) and black (K).
The combination of the four toners generates full-color images.
Used to scan the original image in this area when the ADF is used.
Position the original so that it is aligned with the scales. Also, use the scales to
measure the loaded original.
1
2
3
4
5
6
7
1
1-7