Konica Minolta BIZHUB C203 User Manual page 460

Utility mode
Parameter
Gradation
Adjustment
Line Detec-
tion
* Appears when finisher is installed with the punch kit attached.
!
Detail
For the procedure on adjusting the printer, refer to
For the procedure on adjusting the finisher, refer to
For the procedure on adjusting the color registration, refer to
page 11-56.
For the procedure on adjusting the gradation levels, refer to
[Finisher Adjustment] appears only when optional finisher FS-609 is installed or finisher FS-519 is
installed with the saddle stitcher attached.
Only "Black Image Density" is available for OHP transparencies.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Settings
Parameter
System Auto Reset
Auto Reset
C353/C253/C203
Description
Image Stabiliza- When adjusting the gradation levels, first press
tion Only the [Start] key to perform image stabilization.
Copy Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on increasing the
number of images stored in the memory.
Printer (Gradation) Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on the gradations in
images.
Printer (Resolu- Adjust the gradation levels if there are changes in
tion) the color gradations of the print image. The ad-
justment is made with stress on the reproducibility
of text and lines.
Prior Detection Select whether or not a warning appears when the left partition glass is dirty,
Setting and specify the dirt detection level. The dirt detection operation is performed
before and after scanning an original using the ADF.
Detection While Specify the level at which dirt is detected when scanning an original using the
Feeding Setting ADF. If "Do Not Remove" is selected, the operation to remove lines is not per-
formed.
Job Settings List
Description
Specify the desired length of time until the auto-
matic system reset operation is performed.
• Priority Mode:
Select the setting ("Copy" or "Scan/Fax") for
the mode that the machine enters when the
automatic system reset operation is per-
formed.
• System Auto Reset Time:
Specify the setting (between 1 minute and 9
minutes or "OFF") for the desired length of
time until the automatic system reset opera-
tion is performed.
Select the setting (between 1 minute and 9 min-
utes or "OFF") for the desired length of time until
the automatic panel reset operation is performed
for each mode (Copy and Scan/Fax).
"Printer Adjustment" on page
"Finisher Adjustment" on page
"Color Registration Adjust" on
"Gradation Adjustment" on page
Description
The machine settings can be printed.
Store combinations of paper sizes and paper types to be
counted.
11
Default Setting
-
-
-
-
11-40.
11-48.
11-59.
Default Setting
Priority Mode:
Copy
System Auto Reset
Time: 1 Minute
Copy: 1 Minute
Scan/Fax: 1 Minute
11-25