Troubleshooting
4
Raise lever FN1, turn dial FN2, and then pull out any
paper.
5
Lower guide FN3, and then remove any paper.
–
If the punch kit is installed, pull out the punch scrap
box FN3.1.
6
Return guide FN3 to its original position.
–
If the punch kit is installed, insert the punch scrap box FN3.1 into its original position.
7
Turn dial FN4 to feed the paper, open the transport unit
cover, and then remove any paper.
C353/C253/C203
FN4
4
4-44