Installation Checklist - Konica Minolta bizhub 654e User Manual

1.1 Introduction

INSTALLATION CHECKLIST

This Installation Checklist contains items that are to be check by the Service Engineer installing this machine.
The Service Engineer should check the following items, then explain each checked item to the administrator
of the machine.
To Service Engineer
Make sure that each of these items is properly carried out by checking the box on the right of each item.
1. Perform the following steps before installing this machine.
Check with the administrator to determine if the security functions of this machine should
be enhanced. If the functions should be enhanced, check the following.
If the security functions are not to be enhanced, quit the operation without checking the
following.
Before installing the machine, check with the administrator of the machine to determine if
the following is confirmed.
• Whether the Service Engineer has been informed that the unpacking procedure is to
be performed by the Service Engineer in the presence of the administrator of the ma-
chine.
• Whether the machine has been under the control of the administrator of the machine
with a check made to ensure that evidently the machine has not been unpacked or
used.
The Service Engineer should obtain the administrator's consent to the performance of this
item.
If the machine has been unpacked, check with the administrator that it was the adminis-
trator who unpacked the machine and nobody but the administrator has gain access to the
machine after the unpacking. Then, obtain the administrator's consent to the performance
of the installation procedure for the unpacked machine before attempting to start the pro-
cedure. If the administrator's consent cannot be obtained, call the dealer.
I swear that I would never disclose information as it relates to the settings of this machine
to anybody, or perform malicious or intentional act during setup and service procedures
for the machine.
When giving a copy of the User's Guide, explain the following to the administrator:
• A digital signature is assigned to the data certified by ISO15408. To ensure integrity of
the file, have the administrator of the machine confirm the digital signature using the
property of the provided data file in the user's PC environment.
• Two versions are available, the HTML version and User's Guide Security Operations
(this User's Guide).
• This User's Guide must first be read and the conditions described in this User's Guide
take precedence over the HTML version.
• If the security functions of the machine are to be enhanced, the machine and its sur-
rounding environment should be set up and operated according to this User's Guide.
Refer to the Service Manual and perform the required installation and setup steps.
During the installation and setup procedure, make sure that no unnecessary parts are
mounted on the machine and have the administrator of the machine confirm that no un-
necessary parts are mounted on the machine.
2. After this machine is installed, refer to the Service Manual and perform the following steps.
Check that the SSD mounted on the machine is the type for the exclusive use for this ma-
chine.
Check that the Fax Kit has been mounted and set up properly, if fax functions are to be
used.
After the installation, conduct transmission and reception tests to make sure that the Fax
Kit has been mounted and set up properly.
Let the machine read the Custom Function Pattern Selection setting file
XXX_v1.0_ISO15408.cpd.
Get the administrator of the machine to confirm that [ISO15408] is selected for [Send/Save]
of [Custom Function Pattern Selection] in the Administrator Settings and obtain his or her
consent not to change the setting.
bizhub 754e/654e
1
1-3