Registering The Dns Server - Konica Minolta bizhub 654e User Manual

2.20 TCP/IP Setting Function
2.20.2

Registering the DNS Server

<From the Control Panel>
0 For the procedure to call the TCP/IP settings screen on the display, see steps 1 and 2 of page 2-103.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the TCP/IP Settings screen on the display from the control panel.
2
Make the necessary settings for the DNS Server.
% If [Enable] is selected from the DNS Server Auto Obtain and DNS Domain Name Auto Retrieval, the
DNS Server Address and DNS Domain Name are automatically acquired.
3
Touch [OK].
% If a message appears that prompts you to turn OFF and ON the main power switch, turn OFF and
ON the main power switch. When the main power switch is turned off, then on again, wait at least
10 seconds to turn it on after turning it off. If there is no wait period between turning the main power
switch off, then on again, the machine may not function properly.
<From PageScope Web Connection>
0 For the procedure to access the TCP/IP Setting screen on the display, see steps 1 through 3 of
page 2-103.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start the PageScope Web Connection and call the TCP/IP Setting screen on the display.
2
Enter the address in the DNS Server box.
% If [Enable] is selected from the DNS Server Auto Obtain and DNS Domain Auto Obtain pull-down
menus, the DNS Server Address and DNS Domain Name are automatically acquired.
3
Make the necessary settings.
4
Click [OK].
bizhub 754e/654e
2
2-104