Agilent Technologies 81150A Getting Started Manual page 67

Setting the
Operating and
Trigger mode
81150A and 81160A Getting Started Guide
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the Store/Recall softkey and press

the set to defaults softkey.
Press the Ch 1 key to select channel 1.

Press the normal and inverted output keys to enable both outputs of

channel 1.
The Sine waveform is set by default.

Press the Ampl softkey to set the Amplitude of the carrier sinewave

to 5Vpp.
For setting the value, you can use the Numeric Keypad or the Rotary

Knob.
Getting Started
67