Agilent Technologies 81150A Getting Started Manual page 51

Selecting
Modulation, Source
and Depth
81150A and 81160A Getting Started Guide
Press the Mod key to select the modulation type. AM is set as the

modulating waveform by default.
The AM source is set to Internal by default, the AM depth is set to

100% by default, and the Frequency is also set to 100 Hz by default.
The AM source is set to Internal, the AM depth is set to 100%, and

the AM Frequency is set to 100 Hz. All these settings exist by default.
Therefore, we do not make any changes to these settings for this
example.
Let's have a look at our current screen now.

Getting Started
51