Agilent Technologies 81150A Getting Started Manual page 55

Setting the
Amplitude
81150A and 81160A Getting Started Guide
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the Store/Recall key and press the

Set to Defaults softkey.
Press the Ch 1 key to select channel 1.

Press the normal and inverted output keys to enable both outputs of

channel 1.
The Continuous trigger mode and Sine waveform are enabled by

default.
The Frequency is also set to 1 MHz by default.

Press the Ampl softkey to set the Amplitude to 5 Vpp. From the

various available options, choose the desired unit by simply pressing
it.
For setting the value, you can use the Numeric Keypad or the Rotary

Knob.
Getting Started
55