Agilent Technologies 81150A Getting Started Manual page 50

Getting Started
Setting the
Frequency
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the Store/Recall key and press the

Set to Defaults softkey.
Press the Ch 1 key to select channel 1.

Press the normal and inverted output keys to enable both outputs of

channel 1.
The Continuous trigger mode and Sine waveform are set by default.

Press the Frequency softkey to select frequency. Set the value to 1.5

KHz.
For setting the value, you can use the Numeric Keypad or the Rotary

Knob.
From the various available options, choose the desired unit by simply

pressing it.