Agilent Technologies 81150A Getting Started Manual page 43

Selecting a Pulse
Waveform
Setting the Period
81150A and 81160A Getting Started Guide
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the Store/Recall key and press the

Set to Defaults softkey.
Press the Ch 1 key to select channel 1.

Press the normal and inverted output keys to enable both outputs of

channel 1.
Press Pulse to select it as the waveform type.

Pressing the Frequency softkey selects frequency. Press it again to

toggle to Period softkey. Set the value of the Period to 500ns.
For setting the value, you can use the Numeric Keypad or the Rotary

Knob.
From the various available options, choose the desired unit by simply

pressing it.
Getting Started
43