Safety Symbols on
Instruments
Indicates warning or caution. If
you see this symbol on a product,
you must refer to the manuals for
specific Warning or Caution
information to avoid personal
injury or damage to the product.
Safety requirements for electrical
equipment for measurement,
control, and laboratory use
CAN/CSA C22.2 No. 1010.1
(1993) UL 3101, 3111 (First
Editions). This equipment has
also been evaluated to IEC 61010
edition 1 including amendments
1 and 2.
Environmental Information
Notice for European Community:
This product complies with the
relevant European legal
Directives: EMC Directive
89/336/EEC and Low Voltage
Directive 73/23/EEC.
Conformity Mark of the
Australian ACA for EMC
compliance.
This product complies with the WEEE Directive
(2002/96/EC) marketing requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic household
waste.
Product category: With reference to the equipment
types in the WEEE Directive Annexure I, this product
is classed as a "Monitoring and Control
instrumentation" product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local
Agilent office, or see
www.agilent.com/environment/product/
information.
General Recycling Mark for
plastic parts used in the product.
for more