Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped - Dodge Challenger SRT 2016 Owner's Manual

278 UNDERSTANDING YOUR INSTRUMENT PANEL
Diagnostics — If Equipped
This feature allows the driver to view engine and emis-
sion vehicle faults.
• Push OK to have the most recent fault code sent.
• There is a delay when the next diagnostic code is
requested during which the following message is
displayed:
• "Checking System for Diagnostic Codes."
• Driver must push the OK button again to see the next
Pcode otherwise current message remains displayed.
• Driver exits when they cycle to another submenu (up
or down).
• Faults are displayed from newest to the oldest.
• If the menu is exited before the end of codes is reached
- when the driver re-enters the list will be restarted
from the beginning.
• When no codes are present or the last code is reached
= (P0000) and this message is displayed:
• "No Further or End of Diagnostic Codes."
Battery Saver On/Battery Saver Mode Message —
Electrical Load Reduction Actions — If Equipped
This vehicle is equipped with an Intelligent Battery
Sensor (IBS) to perform additional monitoring of the
electrical system and status of the vehicle battery.
In cases when the IBS detects charging system failure, or
the vehicle battery conditions are deteriorating, electrical
load reduction actions will take place to extend the
driving time and distance of the vehicle. This is done by
reducing power to or turning off non-essential electrical
loads.