Dodge CHALLENGER SRT 2017 Owner's Manual

Table of Contents

Quick Links

Download this manual

Challenger

2 0 1 7

O W N E R ' S M A N U A L

SRT/Hellcat

Table of Contents

Chapters

Table of Contents

Summary of Contents for Dodge CHALLENGER SRT 2017

Page 1 Challenger 2 0 1 7 O W N E R ’ S M A N U A L SRT/Hellcat...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ..............3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..5 HOW TO USE THIS MANUAL .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL Congratulations on selecting your new FCA US LLC ve- Consult the Table of Contents to determine which section hicle. Be assured that it represents precision workmanship, contains the information you desire. distinctive styling, and high quality. Since the specification of your vehicle depends on the items This Owner’s Manual has been prepared with the assis- of equipment ordered, certain descriptions and illustra-...
Page 7: Vehicle Identification Number
INTRODUCTION 5 WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER This Owner’s Manual contains WARNINGS against oper- The Vehicle Identification Number (VIN) is on the left front ating procedures that could result in a collision, bodily corner of the instrument panel. The VIN is visible from injury and/or death.
Page 8: Vehicle Modifications/Alterations
6 INTRODUCTION VIN Location VIN Location The vehicle identification number (VIN) is also located on NOTE: It is illegal to remove or alter the VIN. the right front strut tower inside the engine compartment. VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 9 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Security System Manual Override ... .15 A WORD ABOUT YOUR KEYS ....9 ▫...
Page 10 8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Enter Remote Start Mode ....21 ▫ Trunk Emergency Release ....32 ▫...
Page 11: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9 A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system includes a key fob and a Keyless Push Button Ignition. Keyless Push Button Ignition This feature allows the driver to operate the ignition with the push of a button as long as the key fob is in the passenger compartment.
Page 12: Ignition Or Accessory On Message
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The key fob also contains an emergency key, which stores in the rear of the key fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the key fob go dead. The emergency key is also for locking/unlocking the glove compartment.
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 NOTE: With the Uconnect system, the power window WARNING! (Continued) switches, radio, power sunroof (if equipped), and power could be seriously or fatally injured. Children outlets will remain active for up to ten minutes after the should be warned not to touch the parking brake, ignition is placed in the OFF position.
Page 14: General Information
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information are programmed to the vehicle can be used to start and operate the vehicle. The system will not allow the engine to The following regulatory statement applies to all Radio crank if an invalid key fob is used to start and operate the Frequency (RF) devices equipped in this vehicle: vehicle.
Page 15: Replacement Key Fobs
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Duplication of key fobs may be performed at an authorized CAUTION! (Continued) dealer. This procedure consists of programming a blank the immobilization system may result in a loss of key fob to the vehicle electronics. A blank key fob is one security protection.
Page 16: Vehicle Security Alarm
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly approved To Arm The System by the party responsible for compliance could void the Follow these steps to arm the vehicle security alarm: user’s authority to operate the equipment. 1.
Page 17: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 To Disarm The System The vehicle security alarm is designed to protect your vehicle. However, you can create conditions where the The vehicle security alarm can be disarmed using any of system will give you a false alarm. If one of the previously the following methods: described arming sequences has occurred, the vehicle •...
Page 18: Illuminated Entry
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ILLUMINATED ENTRY NOTE: Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all key fob buttons The courtesy lights will turn on when you use the key fob for all key fobs.
Page 19: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 If the vehicle is equipped with Passive Entry, refer to To Lock The Doors “Keyless Enter-N-Go — Passive Entry” under “Things To Push and release the lock button on the key fob to lock all Know Before Starting Your Vehicle”...
Page 20: Using The Panic Alarm
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm Programming Additional Key Fobs To turn the Panic Alarm feature on or off, push and hold Programming key fobs may be performed at an authorized the Panic button on the key fob for at least one second and dealer.
Page 21 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Emergency Key Removal Separating Key Fob Case 2. Insert the tip of the emergency key or a #2 flat blade 3. Remove the battery by turning the back cover over screwdriver into the slot and gently pry the two halves (battery facing downward) and tapping it lightly on a of the key fob apart.
Page 22: General Information
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information NOTE: • The vehicle must be equipped with an automatic trans- The following regulatory statement applies to all Radio mission to be equipped with Remote Start. Frequency (RF) devices equipped in this vehicle: •...
Page 23: Remote Start Abort Message
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Enter Remote Start Mode WARNING! Push and release the Remote Start button on the key fob • Do not start or run an engine in a closed garage or twice within five seconds. The vehicle doors will lock, the confined area.
Page 24: To Exit Remote Start Mode Without Driving The Vehicle
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Any engine warning lights come on. To Exit Remote Start Mode Without Driving The Vehicle • Low Fuel Light turns on. Push and release the Remote Start button one time or allow •...
Page 25: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of a To lock each door, push the door lock knob on each door collision, lock the vehicle doors before you drive as trim panel downward.
Page 26: Power Door Locks
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE “Keyless Enter-N-Go — Passive Entry” in “Things To WARNING! (Continued) Know Before Starting Your Vehicle” for further informa- ignition of a vehicle equipped with Keyless Enter- tion. N-Go in the ACC or ON/RUN mode. A child could If you push the power door lock switch while the ignition operate power windows, other controls, or move the is on, and either door is open, the power locks will not...
Page 27: Keyless Enter-N-Go - Passive Entry
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 3. The transmission is in PARK. NOTE: • Passive Entry may be programmed on or off; refer to 4. The driver door is opened. “Uconnect Settings” in “Understanding Your Instrument 5. The doors were not previously unlocked. Panel”...
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: All doors will unlock when the front passenger door handle is grabbed regardless of the driver’s door unlock preference setting (“Unlock Driver Door 1st Press” or “Unlock All Doors 1st Press”). Preventing Inadvertent Locking Of Passive Entry Key Fob In Vehicle (FOBIK-Safe) To minimize the possibility of unintentionally locking a...
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Passive Entry key fob inside the car, and it does not find any Passive Entry key fobs outside the car, the car will unlock and alert the customer. NOTE: The vehicle will only unlock the doors when a valid Passive Entry key fob is detected inside the vehicle, and no valid Passive Entry key fob is detected outside the vehicle.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Push The Door Handle Button To Lock Do NOT Grab The Handle When Locking Do NOT grab the door handle, when pushing the door NOTE: handle button. This could unlock the door(s). •...
Page 31: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 General Information The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
Page 32: Auto-Down Feature - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Auto-Down Feature — If Equipped • The Ignition Off Power Delay feature will allow the power The driver’s door power window switch and passenger windows to operate for up to 10 minutes after the ignition door power window switch have an auto-down feature.
Page 33: Trunk Safety Warning
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: The transmission must be in PARK before the With the ignition switch in the OFF position or the key button will operate. If equipped with a manual transmis- removed from the ignition switch, the trunk open symbol sion, the vehicle speed must be under 5 mph (8 km/h) will display until the trunk is closed.
Page 34: Trunk Emergency Release
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release Occupant Restraint Systems Features • Seat Belt Systems As a security measure, a trunk internal emergency release lever is built into the trunk latching mechanism. In the • Supplemental Restraint Systems (SRS) Air Bags event of an individual being locked inside the trunk, the •...
Page 35: Seat Belt Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Children that are not big enough to wear the vehicle seat 9. If the air bag system in this vehicle needs to be modified belt properly (refer to “Child Restraints” in this section to accommodate a disabled person, refer to the “If You for further information) should be secured in a vehicle Need Consumer Assistance”...
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE risk of injury caused by striking the inside of the vehicle. BeltAlert Warning Sequence Everyone in a motor vehicle should be belted at all times. The BeltAlert warning sequence is activated when the Enhanced Seat Belt Use Reminder System (BeltAlert) vehicle is moving above a specified vehicle speed range and the driver or outboard front seat passenger is unbuck-...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 The outboard front passenger seat BeltAlert is not active and reduce your risk of striking the inside of the vehicle or when the outboard front passenger seat is unoccupied. being thrown out of the vehicle. BeltAlert may be triggered when an animal or other items are placed on the outboard front passenger seat or when WARNING!
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A twisted seat belt may not protect you properly. In driver, should always wear their seat belts whether or not an air bag is also provided at their seating a collision, it could even cut into you.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low across 5. Position the shoulder belt across the shoulder and chest your hips, below your abdomen.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Lap/Shoulder Belt Untwisting Procedure Seat Belt Extender is not required for a different occupant, it must be removed. Use the following procedure to untwist a twisted lap/ shoulder belt. WARNING! 1. Position the latch plate as close as possible to the anchor •...
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts And Pregnant Women Seat Belt Pretensioner The front seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Switchable Automatic Locking Retractors (ALR) ALR is activated, you will hear a clicking sound as the seat belt retracts. Allow the webbing to retract completely in The seat belts in the passenger seating positions are this case and then carefully pull out only the amount of equipped with a Switchable Automatic Locking Retractor webbing necessary to comfortably wrap around the occu-...
Page 44: Supplemental Restraint Systems (Srs)
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode WARNING! (Continued) 1. Buckle the combination lap and shoulder belt. • Do not use the Automatic Locking Mode to restrain occupants who are wearing the seat belt or children 2.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • Steering Wheel and Column The ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds • Instrument Panel for a self-check when the ignition switch is first in the •...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine Redundant Air Bag Warning Light comes on intermittently related gauges are not working, the Occupant Restraint or remains on while driving have an authorized dealer Controller (ORC) may also be disabled.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE driver or front passenger seat belt is buckled. The seat belt Front Air Bag Operation buckle switch may adjust the inflation rate of the Ad- Front Air Bags are designed to provide additional protec- vanced Front Air Bags.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 The steering wheel hub trim cover and the upper right side Supplemental Side Air Bags of the instrument panel separate and fold out of the way as Your vehicle is equipped with two types of side air bags: the air bags inflate to their full size.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 belted and seated properly, or if items are positioned in the severity and type of collision. Vehicle damage by itself is area where the SABICs inflate. Children are at an even not a good indicator of whether or not Side Air Bags should greater risk of injury from a deploying air bag.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Bags deploy independently; a left side impact deploys the WARNING! left Side Air Bags only and a right side impact deploys the • Side Air Bags need room to inflate. Do not lean right Side Air Bags only.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 The SABICs may help reduce the risk of partial or complete If A Deployment Occurs ejection of vehicle occupants through side windows in The front air bags are designed to deflate immediately after certain rollover or side impact events.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE irritation, move to fresh air. If the irritation continues, Enhanced Accident Response System see your doctor. If these particles settle on your clothing, In the event of an impact, if the communication network follow the garment manufacturer’s instructions for remains intact, and the power remains intact, depending cleaning.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Maintaining Your Air Bag System WARNING! (Continued) dealer. Only manufacturer approved seat accessories WARNING! may be used. If it is necessary to modify the air bag • Modifications to any part of the air bag system could system for persons with disabilities, contact your cause it to fail when you need it.
Page 56: Child Restraints
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • These data can help provide a better understanding of Children 12 years or younger should ride properly buckled the circumstances in which crashes and injuries occur. up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear NOTE: EDR data are recorded by your vehicle only if a seats rather than in the front.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • Canadian residents should refer to Transport Canada’s NOTE: website for additional information: http://www.tc.gc.ca/ • For additional information, refer to www.safercar.gov/ eng/motorvehiclesafety/safedrivers-childsafety-index-53.htm parents/index.htm or call: 1–888–327–4236 Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Child Size, Height, Weight Or Age Restraint...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infant And Child Restraints WARNING! (Continued) Safety experts recommend that children ride rear-facing in younger, including a child in a rear-facing child the vehicle until they are two years old or until they reach restraint.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 belt-positioning booster seat are held in the vehicle by the the front of the seat when their back is against the seatback, seat belt. should use the seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use the vehicle’s seat WARNING! belt alone:...
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Never allow a child to put the shoulder belt under an arm or behind their back. In a crash, the shoulder belt will not protect a child properly, which may result in serious injury or death.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Lower Anchors And Tethers For CHildren (LATCH) used with the top tether anchorage to install the child Restraint System restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint anchorage...
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Locating The LATCH Anchorages Locating The Upper Tether Anchorages The lower anchorages are round bars that are There are tether strap anchorages behind each found at the rear of the seat cushion where it rear seating position located in the panel be- meets the seatback, below the anchorage sym- tween the rear seatback and the rear window.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. The tether strap will have a hook at the end to attach following the instructions below. See the section “Installing to the top tether anchorage and a way to tighten the strap Child Restraints Using The Vehicle Seat Belt”...
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 5. Tighten all of the straps as you push the child restraint WARNING! rearward and downward into the seat. Remove slack in • Improper installation of a child restraint to the the straps according to the child restraint manufactur- er’s instructions.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems For Installing Child WARNING! (Continued) Restraints In This Vehicle • Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to the...
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 2. Pull enough of the seat belt webbing from the retractor Automatic Locking Retractor (ALR): to pass it through the belt path of the child restraint. Do not twist the belt webbing in the belt path.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 8. If the child restraint has a top tether strap and the WARNING! (Continued) seating position has a top tether anchorage, connect the “Lower Anchors and Tethers for CHildren (LATCH) tether strap to the anchorage and tighten the tether Restraint System”...
Page 70: Transporting Pets
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE raise the head restraint, and where possible, route the 5. Remove slack in the tether strap according to the child tether strap under the head restraint and between the restraint manufacturer’s instructions. two posts.
Page 71: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 ENGINE BREAK-IN RECOMMENDATIONS 100 to 300 miles (161 to 483 km): • Depress the accelerator pedal slowly and not more than The following tips will be helpful in obtaining optimum halfway to avoid rapid acceleration in lower gears (1st to performance and maximum durability for your new SRT 3rd gears).
Page 72: Safety Tips
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Check engine oil with every refueling and add if Exhaust Gas necessary. Oil and fuel consumption may be higher through the first oil change interval. Running the engine WARNING! with an oil level below the add mark can cause severe Exhaust gases can injure or kill.
Page 73: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 vehicle, or when the underside or rear of the vehicle is on during starting, stays on, or turns on while driving, damaged, have a competent mechanic inspect the complete have the system inspected at an authorized dealer as exhaust system and adjacent body areas for broken, dam- soon as possible.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) vehicle properly parked with the engine off, fully An improperly attached, damaged, folded, or stacked depress the accelerator, the brake, and the clutch floor mat, or damaged floor mat fasteners may cause pedal (if present) to check for interference.
Page 75: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Lights WARNING! (Continued) Have someone observe the operation of brake lights and interference with the accelerator, brake, or clutch exterior lights while you work the controls. Check turn pedals then re-install the floor mats. signal and high beam indicator lights on the instrument •...
Page 77 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......79 SEATS ....... .95 ▫...
Page 78 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Automatic High Beam — If Equipped ..107 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) ....114 ▫...
Page 79 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 ▫ Activating Adaptive Cruise Control (ACC) ..123 ▫ Turning FCW On Or Off ....140 ▫...
Page 80 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Venting Sunroof — Express ....159 GARAGE DOOR OPENER — IF EQUIPPED ..150 ▫ Before You Begin Programming HomeLink ..151 ▫...
Page 81: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 MIRRORS Automatic Dimming Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you.
Page 82 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: SOS Call • Your vehicle may be transmitting data as authorized by 1. Push the SOS Call button on the Rearview Mirror. the subscriber. NOTE: In case the SOS Call button is pushed in error, there •...
Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 4. You should be able to speak with the SOS operator NOTE: through the vehicle audio system to determine if addi- • Your vehicle may be transmitting data as authorized tional help is needed. by the subscriber.
Page 84 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. The SOS operator may attempt to contact appropriate WARNING! (Continued) emergency responders and provide them with impor- aftermarket equipment (e.g., two-way mobile radio, tant vehicle information and GPS coordinates. CB radio, data recorder, etc.) to your vehicle’s electri- cal system or modify the antennas on your vehicle.
Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 • The Rearview Mirror light located between the ASSIST • Delayed accessories mode is active. and SOS buttons will continuously be illuminated red. • The ignition is in the OFF position. • The Device Screen will display the following message •...
Page 86 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! (Continued) This device complies with Part 15 of the FCC Rules. steering wheel. You have full responsibility and as- Operation is subject to the following two conditions: sume all risks related to the use of the Uconnect and (1) This device may not cause harmful interference, and SiriusXM Guardian features and applications in this (2) this device must accept any interference received,...
Page 87: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Outside Mirrors Outside Mirrors Folding Feature To receive maximum benefit, adjust the outside mirror(s) to The mirrors are equipped with a rotational hinge. The center on the adjacent lane of traffic and a slight overlap of mirrors have one detent (clockwise) towards the rear of the the view obtained from the inside mirror.
Page 88: Power Mirrors
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors NOTE: A light in the selected button will illuminate indicating the mirror is activated and can be adjusted. The power mirror controls are located on the driver-side door trim panel. Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move.
Page 89: Illuminated Vanity Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Illuminated Vanity Mirrors “Slide-On-Rod” And Extender Features Of Sun Visor An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the To use the “Slide-On-Rod” feature of the sun visor, rotate mirror cover upward.
Page 90: Blind Spot Monitoring (Bsm) - If Equipped
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING (BSM) — IF EQUIPPED Automatic Transmission Vehicles The Blind Spot Monitoring (BSM) system uses two radar The BSM system sensors operate when the vehicle is in any sensors, located inside the rear bumper fascia, to detect forward gear or REVERSE.
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 vehicle. The BSM system monitors the detection zones on The area on the rear fascia where the radar sensors are both sides of the vehicle when the vehicle speed reaches located must remain free of snow, ice and dirt/road approximately 6 mph (10 km/h) or higher and will alert contamination so that the BSM system can function prop- the driver of vehicles in these areas.
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 31 mph (50 km/h).
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Overtaking Traffic The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, If you pass another vehicle slowly (with a relative speed of berms, etc. However, occasionally the system may alert on less than 16 mph (24 km/h) and the vehicle remains in the such objects.
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Opposing Traffic WARNING! Stationary Objects The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones.
Page 95: Rear Cross Path - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Rear Cross Path — If Equipped (5 km/h), to objects moving a maximum of approximately 20 mph (32 km/h), such as in parking lot situations. The Rear Cross Path (RCP) feature is intended to aid the drivers when backing out of parking spaces where their NOTE: In a parking lot situation, oncoming vehicles can vision of oncoming vehicles may be blocked.
Page 96: Modes Of Operation
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation the visual and audio alerts will be issued. In addition to the audible alert the radio (if on) volume will be reduced so Three selectable modes of operation are available in the that the alert can be better heard.
Page 97: Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 2. The device must accept any interference received, in- Power Seats cluding interference that may cause undesired operation The power seat switches are located on the outboard side of the device. of the front seat cushions. The power seat switches are used Changes or modifications to any of these systems by other to control the position of the seat.
Page 98 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch. The seat will move in the direction of the switch. Release the switch when the desired position is reached.
Page 99: Front Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 If the HI-level setting is selected, the system will automati- WARNING! (Continued) cally switch to LO-level after approximately 60 minutes of • Do not ride with the seatback reclined so that the continuous operation. At that time, the display will change shoulder belt is no longer resting against your chest.
Page 100: Front Ventilated Seats - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the ventilated seat button a third time to turn WARNING! (Continued) the ventilated seat off. at low temperatures, especially if used for long NOTE: The engine must be running for the ventilated seats periods of time.
Page 101: Manual Front Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 WARNING! Adjusting a seat while the vehicle is moving is dan- gerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 102: Passenger Seat Easy Entry
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passenger Seat Easy Entry Head Restraints On the passenger seat, pull forward on the lever located on Head restraints are designed to reduce the risk of injury by the side of the seatback in order to dump the seatback and restricting head movement in the event of a rear impact.
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 impact, the RHRs will automatically extend forward mini- To raise the head restraint, pull upward on the head mizing the gap between the back of the occupants head restraint. To lower the head restraint, push the adjustment and the RHR.
Page 104: Folding Rear Seat
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place items over the top of the Reactive Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the opera- tion of the Reactive Head Restraint in the event of a collision and could result in serious injury or death.
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stabil- ity for child seats and/or passengers. An improperly latched seat could cause serious injury.
Page 106: To Open And Close The Hood
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move to the outside of the vehicle, the safety catch is located under the center front edge of the hood. Two latches must be released to open the hood. 1.
Page 107: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower hood to approximately 12 inches (30 cm) and drop the hood to close. Make sure hood is fully closed for both latches. Never drive vehicle unless hood is fully closed, with both latches engaged.
Page 108: Automatic Headlights
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE for up to 90 seconds after you place the ignition into the OFF position. The headlight time delay can be pro- grammed 0/30/60/90 seconds. Refer to “Uconnect Settings” in “Understanding Your Instrument Panel” for further information. To turn the automatic system off, move the headlight switch out of the AUTO position.
Page 109: Automatic High Beam - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Automatic High Beam — If Equipped To Activate The Automatic High Beam Headlamp Control system 1. Turn the headlight switch to the AUTO headlight posi- provides increased forward lighting at night by automat- tion.
Page 110: Daytime Running Lights (Drl) - If Equipped
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The lights must be turned off within 45 seconds of Lights-On Reminder turning the ignition OFF to activate this feature. If the headlights or parking lights are on after the ignition If you turn the headlights, park lights or ignition switch is placed in the OFF position, a chime will sound to alert ON again, the system will cancel the delay.
Page 111: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 To activate the front fog lights, turn on the parking lights or the low beam headlights and push the headlight switch. To turn off the front fog lights, either push the headlight switch a second time or turn off the headlight switch.
Page 112: Lane Change Assist
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: High/Low Beam Switch • If either light remains on and does not flash, or there is Push the multifunction lever away from you to switch the a very fast flash rate, check for a defective outside light headlights to high beam.
Page 113: Map/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Map/Reading Lights Interior Lights These lights are mounted between the sun visors on the The interior lights come on when a door is opened. overhead console. Each light is turned on by pushing the To protect the battery, the interior lights will turn off lens.
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dimmer Controls Instrument Panel Dimmer With the parking lights or headlights on, rotating the left Dome Light Position dimmer control upward will increase the brightness of the Rotate the dimmer control completely upward to the instrument panel lights and lighted cupholders (if second detent to turn on the interior lights.
Page 115: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Parade Mode (Daytime Brightness Feature) Rotate the end of the multifunction lever to the first detent past the intermittent settings for low-speed wiper opera- Rotate the instrument panel dimmer control upward to the tion, or to the second detent past the intermittent settings first detent.
Page 116: Mist Feature
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature WARNING! Rotate the end of the lever downward to the MIST position Sudden loss of visibility through the windshield could to activate a single wipe cycle to clear off road mist or spray lead to a collision.
Page 117: Rain Sensing Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The Headlights On with Wipers feature can be turned on NOTE: and off using the Uconnect System, refer to “Uconnect • The Rain Sensing feature will not operate when the Settings” in “Understanding Your Instrument Panel” for wiper switch is in the low or high-speed position.
Page 118: Manual Tilt/Telescoping Steering Column
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Rain Sensing can be turned on and off using the the steering column, pull the steering wheel outward or Uconnect System, refer to “Uconnect Settings” in “Under- push it inward as desired. To lock the steering column in standing Your Instrument Panel”...
Page 119: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on for an average of 80 minutes or more before automatically shut- ting off.
Page 120: Speed Control - If Equipped
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE remote start through the Uconnect system. Refer to “Uconnect Settings” in “Understanding Your Instrument Panel” for further information. WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion, or other physical conditions must exercise care when using the steering wheel heater.
Page 121: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 To Activate along with set speed will also appear and stay on in the instrument cluster display when the speed is set. Push the on/off button to activate the Speed Control. “CRUISE CONTROL READY” will appear on the instru- To Deactivate ment cluster display to indicate the Speed Control is on.
Page 122: To Accelerate For Passing
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The driver’s preferred units can be selected through the The driver’s preferred units can be selected through the touchscreen radio settings if equipped. Refer to “Under- touchscreen radio settings if equipped. Refer to “Under- standing Your Instrument Panel”...
Page 123: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Using Speed Control On Hills system and not designed to prevent collisions. Speed Control function performs differently. Please refer to the The transmission may downshift on hills to maintain the proper section within this chapter. vehicle set speed.
Page 124: Adaptive Cruise Control (Acc) Operation
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The normal (fixed speed) cruise control will not WARNING! (Continued) react to preceding vehicles. Always be aware of the mode • Cannot take street, traffic, and weather conditions selected. into account, and may be limited upon adverse You can change the mode by using the Cruise Control sight distance conditions.
Page 125: Activating Adaptive Cruise Control (Acc)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Activating Adaptive Cruise Control (ACC) You can only engage ACC if the vehicle speed is above 20 mph (32 km/h). The system will cancel when the vehicle speed drops below 15 mph (24 km/h). The minimum Set Speed for the ACC system is 20 mph (32 km/h).
Page 126: To Activate/Deactivate
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate/Deactivate Push and release the Adaptive Cruise Control (ACC) on/off button. The ACC menu in the instrument cluster display will read “ACC Ready.” Adaptive Cruise Control Off WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous.
Page 127: To Cancel
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • The vehicle parking brake is applied. If the system is Set when the vehicle speed is above 20 mph (32 km/h), the Set Speed shall be the current speed of the • A Trailer Sway Control (TSC) event occurs. vehicle.
Page 128: To Vary The Speed Setting
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will WARNING! (Continued) continue to increase in 5 mph increments until the is too high or too low for prevailing traffic and road button is released.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 U.S. Speed (mph) NOTE: • Pushing the SET (-) button once will result in a 1 mph • When you override and push the SET (+) button or decrease in set speed. Each subsequent tap of the button SET (-) buttons, the new Set Speed will be the current results in a decrease of 1 mph.
Page 130: Setting The Following Distance In Acc
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead.
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short) To increase the distance setting, push the Distance Setting — Increase button and release. Each time the button is pushed, the distance setting increases by one bar (longer). To decrease the distance setting, push the Distance Setting —...
Page 132: Overtake Aid
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicle Indicator” icon, and the system adjusts vehicle speed automatically to maintain the distance setting, re- gardless of the set speed. The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed.
Page 133: Adaptive Cruise Control (Acc) Menu
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Adaptive Cruise Control (ACC) Menu The ACC screen may display once again if any ACC activity occurs, which may include any of the following: The instrument cluster display will show the current ACC •...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not remove any screws from the sensor. Doing so The “ACC/FCW Unavailable Wipe Front Radar Sensor” message can sometimes be displayed while driving in could cause an ACC system malfunction or failure and highly reflective areas (i.e.
Page 135: Precautions While Driving With Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Service ACC/FCW Warning Offset Driving If the system turns off, and the instrument cluster display ACC may not detect a vehicle in the same lane that is offset reads “ACC/FCW Unavailable Service Required” or from your direct line of travel, or a vehicle merging in from “Cruise/FCW Unavailable Service Required”, there may a side lane.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turns And Bends Using ACC On Hills When driving on a curve with ACC engaged, the system When driving on hills, ACC may not detect a vehicle in may decrease the vehicle speed and acceleration for stabil- your lane.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Lane Changing Narrow Vehicles ACC may not detect a vehicle until it is completely in the Some narrow vehicles traveling near the outer edges of the lane in which you are traveling. In the illustration shown, lane or edging into the lane are not detected until they have ACC has not yet detected the vehicle changing lanes and it moved fully into the lane.
Page 138: General Information
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles Operation is subject to the following two conditions: ACC does not react to stationary objects and stationary 1. The device may not cause harmful interference. vehicles. For example, ACC will not react in situations 2.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 To Vary The Speed Setting WARNING! To Increase Speed In the normal Cruise Control mode, the system will not When the Normal (Fixed Speed) Cruise Control is set, you react to vehicles ahead. In addition, the proximity can increase speed by pushing the SET (+) button.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will Metric Speed (km/h) continue to increase in 10 km/h increments until the • Pushing the SET (-) button once will result in a 1 km/h button is released.
Page 141: Forward Collision Warning (Fcw) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 To Resume Speed NOTE: FCW monitors the information from the forward looking sensors as well as the Electronic Brake Controller To resume a previously set speed, push the RES button and (EBC), to calculate the probability of a forward collision. release.
Page 142: Turning Fcw On Or Off
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Turning FCW On Or Off • The minimum speed for FCW activation is 5 mph NOTE: The default status of FCW is on; this allows the (10 km/h). system to warn you of a possible collision with the vehicle in front of you.
Page 143: Changing Fcw Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • FCW will be disabled like ACC, with the unavailable Changing FCW Status screens. The FCW Sensitivity Settings are programmable through the Uconnect System. Refer to “Uconnect Settings” in Service FCW Warning “Understanding Your Instrument Panel” for further infor- If the system turns off, and the instrument cluster display mation.
Page 144: Parksense Sensors
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense can be active only when the gear selector is in detected obstacle. Refer to “Instrument Cluster Display” in REVERSE. If ParkSense is enabled at this gear selector “Understanding Your Instrument Panel” for further infor- position, the system will remain active until the vehicle mation.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc...
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle:...
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 WARNING ALERTS Rear Greater 79-59 inches 59-47 inches 47-39 inches 39-25 inches 25-12 inches Less than Distance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 inches (in/cm) 79 inches (30 cm) (200 cm) Audible None Single 1/2-...
Page 148: Enabling And Disabling Parksense
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling ParkSense cluster display will feature the “PARKSENSE OFF” mes- sage for as long as the vehicle is in REVERSE. ParkSense can be enabled and disabled with the ParkSense switch, located on the switch panel below the Uconnect The ParkSense switch LED will be on when ParkSense is display.
Page 149: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • When you turn ParkSense off in DRIVE, the instrument If “PARKSENSE UNAVAILABLE WIPE REAR SENSORS” appears in the instrument cluster display, make sure the cluster will display PARKSENSE OFF for five seconds. outer surface and the inside of the rear fascia/bumper is Furthermore, once you turn ParkSense off, it remains off clean and clear of snow, ice, mud, dirt or other obstruction,...
Page 150: Parkview Rear Back Up Camera - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UNAVAILABLE SERVICE REQUIRED” message to be CAUTION! (Continued) shown in the instrument cluster display. obstacle is detected. It is recommended that the driver looks over his/her shoulder when using WARNING! ParkSense. Drivers must be careful when backing up even when using the Rear Park Assist system.
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 REVERSE. However, this feature is cancelled if the forward When enabled, active guide lines are overlaid on the image vehicle speed exceeds 8 mph (13 km/h), the transmission is to illustrate the width of the vehicle and its projected shifted into PARK or the vehicle’s ignition is cycled to the backup path based on the steering wheel position.
Page 152: Overhead Console
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If snow, ice, mud, or any foreign substance builds Courtesy/Reading Lights up on the camera lens, clean the lens, rinse with water, and At the forward end of the overhead console are two dry with a soft cloth.
Page 153: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 The HomeLink buttons that are located in the overhead battery be placed in the hand-held transmitter of the device console designate the three different HomeLink channels. that is being programmed to the HomeLink system. The HomeLink indicator is located on the left side of the To erase the channels, place the ignition in the ON/RUN first button.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view. 3. Push and hold the HomeLink button you want to program while you push and hold the hand-held trans- mitter button.
Page 155: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 6. Return to the vehicle and push the programmed 2. Push and hold the desired HomeLink button until the HomeLink button twice (holding the button for two indicator light begins to flash after 20 seconds. Do not seconds each time).
Page 156: Canadian/Gate Operator Programming
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Continue to hold both buttons and observe the indicator NOTE: For vehicles equipped with Keyless Enter-N-Go, light. The HomeLink indicator will flash slowly and place the ignition in the RUN position with the engine ON. then rapidly after HomeLink has received the frequency Make sure while programming HomeLink with the engine signal from the hand-held transmitter.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 It may be helpful to unplug the device during the cycling 5. Push and hold the programmed HomeLink button and process to prevent possible overheating of the garage door observe the indicator light. or gate motor.
Page 158: Using Homelink
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Push and hold the desired HomeLink button until the Troubleshooting Tips indicator light begins to flash after 20 seconds. Do not If you are having trouble programming HomeLink, here release the button. are some of the most common solutions: 3.
Page 159: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with or other objects are in the path of the door or gate. FCC and IC rules. Changes or modifications not ex- Only use this transceiver with a garage door opener pressly approved by the party responsible for compli- that has a “stop and reverse”...
Page 160: Opening Sunroof - Express
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) children, can become entrapped by the power sun- roof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof.
Page 161: Opening Sunroof - Manual Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Opening Sunroof — Manual Mode Pinch Protect Feature To open the sunroof, push and hold the switch rearward. This feature will detect an obstruction in the opening of the The sunroof will move rearward and automatically stop at sunroof during Express Close operation.
Page 162: Wind Buffeting
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting ELECTRICAL POWER OUTLETS Wind buffeting can be described as the perception of Your vehicle is equipped with 12 Volt (13 Amp) power pressure on the ears or a helicopter-type sound in the ears. outlets that can be used to power cellular phones, small Your vehicle may exhibit wind buffeting with the windows electronics and other low powered electrical accessories.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Power Outlet — Integrated Center Stack Front Uconnect 8.4/8.4 NAV Power Outlet — Center Console NOTE: All accessories connected to these powered outlets should be removed or turned off when the vehicle is not in use to protect the battery against discharge.
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts.
Page 165: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 CUPHOLDERS CAUTION! (Continued) Front Cupholders enough, the vehicle’s battery will discharge suffi- ciently to degrade battery life and/or prevent the The front cupholders are located in the center console and engine from starting. in the door panels.
Page 166: Rear Cupholders
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide conve- nient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
Page 167: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 STORAGE Glove Compartment The glove compartment is located on the passenger side of the instrument panel. Opened Glove Compartment Console Storage The center console has a storage compartment located underneath the armrest. The compartment contains a 12 Volt power outlet, and a molded-in coin holder (de- Glove Compartment signed to hold various size coins).
Page 168: Rear Window Features
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the touchscreen or climate controls switch bank. Push this button to turn on the rear window defroster and the heated outside mirrors (if equipped).
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear win- dow. Do not use abrasive window cleaners on the interior surface of the window.
Page 171 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Instrument Cluster Display Selectable Menu INSTRUMENT PANEL FEATURES ...172 Items .......204 INSTRUMENT CLUSTER —...
Page 172 170 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Timers.......237 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED .
Page 173 UNDERSTANDING YOUR INSTRUMENT PANEL 171 ▫ Media .......282 ▫ Mobile App (8.4/8.4 NAV) ....287 ▫...
Page 174: Instrument Panel Features
172 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES Instrument Panel 1 — Air Outlets 5 — Keyless Start/Stop Button 2 — Instrument Cluster 6 — Trunk Release Button 3 — Glove Compartment 7 — Headlight Switch 4 — Media Center...
Page 175: Instrument Cluster - Srt
UNDERSTANDING YOUR INSTRUMENT PANEL 173 INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.4L — Base...
Page 176: Instrument Cluster Descriptions
174 UNDERSTANDING YOUR INSTRUMENT PANEL Instrument Cluster For SRT 6.2L Supercharged — Premium Instrument Cluster Descriptions 2. Instrument Cluster Display • When the appropriate conditions exist, this display 1. Tachometer shows the instrument cluster display messages. Refer • Indicates the engine speed in revolutions per minute to “Instrument Cluster Display”...
Page 177 UNDERSTANDING YOUR INSTRUMENT PANEL 175 3. Speedometer WARNING! • Indicates vehicle speed. A hot engine cooling system is dangerous. You or 4. Fuel Gauge others could be badly burned by steam or boiling • The pointer shows the level of fuel in the fuel tank coolant.
Page 178: Warning And Indicator Lights
176 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS All active telltales will display first if applicable. The system check menu may appear different based upon The warning/indicator lights switch on in the instrument equipment options and current vehicle status. Some tell- panel together with a dedicated message and/or acoustic tales are optional and may not appear.
Page 179 UNDERSTANDING YOUR INSTRUMENT PANEL 177 Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition is placed in the ON/RUN position.
Page 180 178 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake appli- cation. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 179 Operation of the Brake Warning Light can be checked by WARNING! placing the ignition in the ON/RUN position. The light should illuminate for approximately two seconds. The light Driving a vehicle with the red brake light on is should then turn off unless the parking brake is applied or dangerous.
Page 182 180 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Temperature Warning Light Red Warning What It Means Light Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold.
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 181 Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate the vehicle until the cause is corrected.
Page 184 182 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a prob- lem is detected while the engine is running, the light will either stay on or flash depending on the nature of the problem.
Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 183 Transmission Temperature Warning Light Red Telltale What It Means Light Transmission Temperature Warning Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage. If this light turns on, safely pull over and stop the vehicle. Then, place the trans- mission into NEUTRAL and run the engine at idle speed or apply light foot pressure to increase the engine speed RPM until the Transmission Temperature light turns off.
Page 186 184 UNDERSTANDING YOUR INSTRUMENT PANEL Electric Power Steering Fail Warning Light — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning — If Equipped This light is used to manage the electrical warning of the EPS (Electric Power Steering). Refer to “Power Steering”...
Page 187: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 185 Speed Limit Warning Light — If Equipped Red Telltale What It Means Light Speed Limit Warning Light If the vehicle speed is greater than or equal to 75 mph (120 km/h), the Speed Warning telltale will display in the instrument cluster display, and a chime will sound with a pop up warning message.
Page 188 186 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! CAUTION! A malfunctioning catalytic converter, as referenced Prolonged driving with the Malfunction Indicator above, can reach higher temperatures than in normal Light (MIL) on could cause damage to the engine operating conditions. This can cause a fire if you drive control system.
Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 187 Yellow Telltale What It Means Light • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive. • This light will come on when the vehicle is in an ESC event. Electronic Stability Control (ESC) OFF Indicator Light —...
Page 190 188 UNDERSTANDING YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) Warning Light Yellow Telltale What It Means Light Tire Pressure Monitoring System (TPMS) Warning Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring.
Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 189 Please note that the TPMS is not a substitute for proper tire CAUTION! maintenance, and it is the driver’s responsibility to main- tain correct tire pressure, even if under-inflation has not The TPMS has been optimized for the original equip- reached the level to trigger illumination of the TPMS low ment tires and wheels.
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 191 Adaptive Cruise Control Fault Indicator Light — If Equipped Yellow Telltale What It Means Light Adaptive Cruise Control Fault Indicator Light This light will turn on when the ACC is not operating and needs service. For further information, refer to “Adaptive Cruise Control (ACC)”...
Page 194 192 UNDERSTANDING YOUR INSTRUMENT PANEL Loose Fuel Filler Cap Indicator Light — If Equipped Yellow Telltale What It Means Light Loose Fuel Filler Cap Indicator Light — If Equipped This light will illuminate when the fuel filler cap is loose. Properly close the filler cap to disen- gage the light.
Page 195 UNDERSTANDING YOUR INSTRUMENT PANEL 193 LaneSense Failure Indicator Light — If Equipped Yellow Telltale What It Means Light LaneSense Failure Indicator Light This light will turn on when the LaneSense system is not operating and needs service. Please see your authorized dealer. Service AWD Indicator Light —...
Page 196: Green Telltale Indicator Lights
194 UNDERSTANDING YOUR INSTRUMENT PANEL Green Telltale Indicator Lights Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light — If Equipped This indicator will illuminate when the front fog lights are on. Park/Headlight On Indicator Light Green Telltale What It Means...
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 195 Turn Signal Indicator Lights Green Telltale What It Means Light Turn Signal Indicator Lights The instrument cluster directional arrow will flash independently for the left or right turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multi- function lever is moved down (left) or up (right).
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL Adaptive Cruise Control (ACC) Set With Target Detected Light — If Equipped Green Telltale What It Means Light Adaptive Cruise Control (ACC) Set With Target Detected Light — If Equipped This light will turn on when the Adaptive Cruise Control speed is SET and the target vehicle is detected.
Page 199: Blue Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 197 LaneSense Indicator Light — If Equipped Green Telltale What It Means Light LaneSense Indicator Light — If Equipped The LaneSense indicator is solid green when both lane markings have been detected and the sys- tem is “armed” to provide visual warnings in the instrument cluster and a torque warning in the steering wheel if an unintentional lane departure occurs.
Page 200: White Telltale Indicator Lights
198 UNDERSTANDING YOUR INSTRUMENT PANEL White Telltale Indicator Lights LaneSense Indicator Light — If Equipped White Telltale What It Means Light LaneSense Indicator Light — If Equipped When the LaneSense system is ON, the LaneSense indicator is solid white when only the left or right lane marking has been detected.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 Adaptive Cruise Control (ACC) Ready Light — If Equipped White Telltale What It Means Light Adaptive Cruise Control (ACC) Ready Light — If Equipped This light will turn on when Adaptive Cruise Control (ACC) has been turned on. Refer to “Adap- tive Cruise Control ”...
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL Custom Mode Indicator Light White Telltale What It Means Light Custom Mode Indicator Light This light will turn on when Custom Mode is active. Refer to “Drive Modes” in “Starting And Operating” for further information. Valet Mode Indicator Light White Telltale What It Means...
Page 203: Instrument Cluster Display
UNDERSTANDING YOUR INSTRUMENT PANEL 201 INSTRUMENT CLUSTER DISPLAY This system conveniently allows the driver to select a variety of useful information by pushing the arrow buttons The instrument cluster display features an interactive located on the left side of the steering wheel. The instru- display which is located in the instrument cluster.
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Left And Right Arrow Buttons: pushing the following buttons mounted on the steering Using the left or right arrow button allows you to cycle wheel: through the submenu items of the Main menu item. NOTE: •...
Page 205: Engine Oil Life Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 203 • Pushing the OK button makes the selection and a or arrow buttons. To reset the oil change indicator system confirmation screen will appear (returning the user to (after performing the scheduled maintenance), refer to the the 1st page of the submenu).
Page 206: Cruise Control
204 UNDERSTANDING YOUR INSTRUMENT PANEL • Cruise Control Set NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not This telltale will illuminate green when the elec- reset. If necessary, repeat this procedure. tronic speed control is set.
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 Vehicle Info Performance Features — If Equipped Push and release the up or down arrow button until the WARNING! “Vehicle Info” menu is displayed in the instrument cluster display. Push and release the right or left arrow button to Measurement of vehicle statistics with the Perfor- scroll through the submenus items of “Vehicle Info.”...
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL • 0-100 MPH (0-161 km/h) Timer • Lap History – Best – Will list the last 5 laps with the best lap highlighted in green. – Last • Top Speed – Current – Reaction Timer The following describes each feature and its operation: •...
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 Push the SET + or the SET- button (located on the steering Fuel Economy wheel) and the following will display in the instrument Two submenu pages one with Current Value (instanta- cluster display: neous calculation of the fuel economy) displayed and one without the Current Value displayed (toggle the left or ACC SET right arrow button to select one):...
Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL • Distance – Shows the total distance (mi or km) traveled 1. Upper Left for Trip A or Trip B since the last reset. • Compass • Outside Temp. • Average Fuel Economy – Shows the average fuel •...
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 209 3. Center 6. Gear Display • Menu Title (default) • Full (default) • Compass • Single • Outside Temp. 7. Restore Default • Time • Ok • Range to Empty • Cancel • Average (MPG, L/100 km, or km/l) Speed Warning —...
Page 212: Performance Shift Indicator (Psi) - If Equipped
210 UNDERSTANDING YOUR INSTRUMENT PANEL • There is a delay when the next diagnostic code is shift point has been reached and the driver is still acceler- requested during which the following message is dis- ating. This indication notifies the driver to change gear played: corresponding to the configured RPMs in the head unit.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 These messages indicate the vehicle battery has a low state Loss of the battery charge may indicate one or more of the of charge and continues to lose electrical charge at a rate following conditions: that the charging system cannot sustain.
Page 214: Cybersecurity
212 UNDERSTANDING YOUR INSTRUMENT PANEL • The battery was used for an extended period with the • The vehicle should have service performed if the mes- engine not running to supply radio, lights, chargers, sage is still present during consecutive trips and the +12V portable appliances like vacuum cleaners, game evaluation of the vehicle and driving pattern did not consoles and similar devices.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 The risk of unauthorized and unlawful access to your NOTE: vehicle systems may still exist, even if the most recent • FCA or your dealer may contact you directly regarding version of vehicle software (such as Uconnect software) is software updates.
Page 216: Uconnect Radios - If Equipped
214 UNDERSTANDING YOUR INSTRUMENT PANEL UCONNECT RADIOS — IF EQUIPPED For Canadian residents with the below radio configuration, please refer to the Uconnect 8.4 Owner’s Manual Supple- For detailed information about your Uconnect 8.4 radio, ment. refer to the following images for the correct Uconnect Owner’s Manual Supplement.
Page 217: Uconnect Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 215 UCONNECT SETTINGS Buttons On The Faceplate The Uconnect system uses a combination of buttons on the Buttons on the faceplate are located below the Uconnect touchscreen and buttons on the faceplate located on the system in the center of the instrument panel. In addition, center of the instrument panel that allows you to access there is a Scroll/Enter control knob located on the right and change the customer programmable features.
Page 218: Customer Programmable Features - Uconnect 8.4 Settings
216 UNDERSTANDING YOUR INSTRUMENT PANEL Customer Programmable Features — Uconnect 8.4 When making a selection, press the button on the touch- screen to enter the desired mode. Once in the desired Settings mode, press and release the preferred setting “option” until Press the “Apps ”...
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 Setting Name Selectable Options • To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and the inte- rior dimmer switch must not be in the party or parade positions. Display Brightness With –...
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL Controls Screen Time-Out — If Equipped NOTE: When the “Control Screen Time Out” feature is selected, the controls screen will stay open for five seconds before the screen times out. With the feature deselected, the screen will stay open until it is manually closed. Navigation Turn-By- Turn Displayed In Cluster —...
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Units After pressing the “Units” button on the touchscreen, you may select each unit of measure independently displayed in the instrument cluster display, and navigation system (if equipped). The following selectable units of measure are listed below: Setting Name Selectable Options...
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length Brief Detailed Show Command List Never With Help Always Clock After pressing the “Clock” button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 Setting Name Selectable Options Show Time In Status Bar — If Equipped NOTE: The “Show Time In Status Bar” feature will allow you to turn on or shut off the digital clock in the status bar. Safety &...
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options ParkSense — If Equipped Sound Only Sound And Display NOTE: The ParkSense system will scan for objects behind the vehicle when the gear selector is in REVERSE and the vehicle speed is less than 7 mph (11 km/h). It will provide an alert (audible and/or visual) to indicate the proximity to other objects.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 Setting Name Selectable Options • If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not dam- aged, the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor align- ment.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Rain Sensing Auto Wiper NOTE: When this feature is selected and the wipers are on, the system will automatically activate the windshield wipers if it senses moisture on the windshield. Hill Start Assist — If Equipped NOTE: When this feature is selected, the Hill Start Assist (HSA) system is active.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 Setting Name Selectable Options Auto Dim High Beams — If Equipped Daytime Running Lights — If Equipped Steering Directed Lights Flash Lights With Lock Doors & Locks After pressing the “Doors & Locks” button on the touch- screen, the following settings will be available: Setting Name Selectable Options...
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Flash Lights With Lock NOTE: When the “Flash Lights With Lock” feature is selected, the exterior lights will flash when the doors are locked or un- locked with the key fob, or when using the passive entry feature. This feature may be selected with or without the “Sound Horn on Lock”...
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 Passive Entry — If Equipped NOTE: The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob lock or unlock buttons. To make your selection, press the “Passive Entry” button on the touchscreen, until a check- mark appears next to the setting, showing that the setting has been selected.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Comfort Systems — If Equipped After pressing the “Auto-On Comfort” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated/ Remote Start All Starts Ventilated Seat & Steering Wheel With Vehicle Start —...
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Setting Name Selectable Options Engine Off Power 0 seconds 45 seconds 5 minutes 10 minutes Delay NOTE: When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect Phone system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to ten minutes after the ignition is cycled to OFF.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL Audio After pressing the “Audio” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Balance/Fade “Speaker” Icon Arrow Buttons NOTE: The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon, use the arrows to adjust, or tap the “Speaker”...
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 Setting Name Selectable Options Surround Sound — If Equipped NOTE: The “Surround Sound” feature provides simulated surround sound mode. To make your selection, press the “Sur- round Sound” button on the touchscreen, select “On” or “Off.” AUX Volume Offset —...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Settings After pressing the “Phone Settings” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Do Not Disturb List of Settings NOTE: Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto Reply Message (custom, default) and Custom Auto Reply Message (create message).
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Tune Start Channel Skip Name of Channel NOTE: SiriusXM can be programmed to skip channels. To make your selection, press the “Channel Skip” button on the touchscreen, select the channels you would like to skip.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL Restore Settings After pressing the “Restore Settings” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Restore Settings Cancel NOTE: When this feature is selected, it will reset all settings to their default settings. To restore the settings to their default setting, press the “Restore Settings”...
Page 237: Srt Performance Pages
UNDERSTANDING YOUR INSTRUMENT PANEL 235 System Information After pressing the “System Information” button on the touchscreen, the following settings will be available: Setting Name Selectable Options System Information System Software Information Screen NOTE: When the “System Information” feature is selected, a “System Software Information” screen will appear, displaying the system software version.
Page 238: Home
236 UNDERSTANDING YOUR INSTRUMENT PANEL The Performance Pages include the following: The following describes each feature and its operation: • Home Home • Timers • Gauges 1 • Gauges 2 • G-Force • Engine SRT Performance Pages — Home When Home is selected, the following features will be available: •...
Page 239: Timers
UNDERSTANDING YOUR INSTRUMENT PANEL 237 • A left and right arrow to allow the user to scroll through When the Timers Page is selected you will be able to select vehicle images. from following “Tickets”: • Current • A short-cut to the SRT Drive Modes feature. Pressing the “Current”...
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL The “Tickets” contain the timers listed below: • Reaction Time Measures the driver’s reaction time for launching the vehicle against a simulated drag strip timing light (behav- ior modeled after 500 Sportsman Tree) displayed in the instrument cluster display.
Page 241: Gauges 1
UNDERSTANDING YOUR INSTRUMENT PANEL 239 • ⅛ Mile (200 meter) Trap Speed NOTE: Brake Distance and Speed timers will only display ready when vehicle is traveling at greater than 30 MPH Displays velocity or speed of the vehicle at the end of an ⅛ (48 km/h).
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Temperature Shows the actual oil temperature. • Battery Voltage Shows the actual battery voltage. • Trans Oil Temp (Auto Transmission Only) Shows the actual automatic transmission oil temperature. SRT Performance Pages — Gauges 1 (6.2L Automatic Transmission) When selected, this screen displays the following values: •...
Page 243: Gauges 2
UNDERSTANDING YOUR INSTRUMENT PANEL 241 When selected, this screen displays the following values: Gauges 2 • Coolant Temperature Shows the actual coolant temperature. • Oil Temperature Shows the actual oil temperature. • Oil Pressure Shows the actual oil pressure. SRT Performance Pages — Gauges 2 (6.4L Manual Transmission)
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL • Transmission Temperature (Automatic Transmission Only) Shows the actual transmission temperature. SRT Performance Pages — Gauges 2 (6.4L Automatic Transmission) When selected, this screen displays the following values: • Battery Voltage SRT Performance Pages — Gauges 2 (6.2L) When selected, this screen displays the following values: Shows the actual battery voltage.
Page 245: G-Force
UNDERSTANDING YOUR INSTRUMENT PANEL 243 • Air Fuel Ratio G-Force Shows the current value for the air fuel ratio. • Inter-Cooler (I/C) Coolant Temperature Shows the current value for the I/C coolant temperature. • Intake Air Temperature Shows the actual intake air temperature. SRT Performance Pages —...
Page 246: Engine
244 UNDERSTANDING YOUR INSTRUMENT PANEL When G-Force is selected, the following features will be negative, this indicates a turn to the left, and when the available: steering angle value is positive, a turn to the right. • Lateral G-Force Left and Right When a force greater than zero is measured, the display will update the value as it climbs.
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 • Instantaneous Torque Shows the instantaneous torque. • Oil Pressure (6.4L Only) Shows the actual oil pressure. • Gear (Automatic Transmission Only) Shows the current (or pending) operating gear of the vehicle. • Boost Pressure (6.2L Only) Shows the actual boost pressure.
Page 248: Srt Drive Modes
246 UNDERSTANDING YOUR INSTRUMENT PANEL SRT DRIVE MODES Key Fob 6.2L Supercharged Engine — If Equipped Black Key Fob Use of the black key fob limits the driver to a reduced engine output. This information is also available within the Red Key Fob SRT Drive Modes interface, and can be accessed by press- If your vehicle is equipped with the 6.2L supercharged...
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 • Pushing the SRT button on the instrument panel switch Drive Modes bank. • Selecting “Drive Modes” from the “Apps” menu. • Selecting “Drive Modes” from within the Performance Pages menu. NOTE: Not all options listed in this manual are available on every vehicle.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Engine/ Red Key/ Black Key/ Transmis- Paddle Transmis- Suspension Steering Traction 700+ HP 500 HP sion Shifters sion 6.2L Auto 6.2L Manual 6.4L Auto 6.4L Manual The SRT Drive Modes main screen displays the current NOTE: drive mode and real-time status of the vehicle’s perfor- •...
Page 251: Track Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 249 Listed below are the available Drive Modes: Sport Mode Track Mode Drive Modes (Sport) Pressing the “Sport” button on the touchscreen will acti- Drive Modes (Track) vate the configuration for typical enthusiast driving. The Pressing the “Track” button on the touchscreen will acti- Traction, Transmission, Steering, and Suspension systems vate the configuration for typical track driving.
Page 252: Default Mode
250 UNDERSTANDING YOUR INSTRUMENT PANEL Default Mode NOTE: If Valet Mode is active, the vehicle will start in Valet Mode, not Default Mode. Custom Mode Default Mode This mode is for typical driving conditions where the Traction and Transmission will be operating in their Street Custom Mode settings, which cannot be changed while in this mode.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 that is saved for quick selection of your favorite settings. While in the Custom Drive Mode screen, press the “Cus- While in Custom Mode, the Power, Traction, Transmission, tom Set-Up” button on the touchscreen to access the Steering, Suspension, and Paddle Shifter settings are selectable options.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL Drive Mode Set-Up Info Power — If Equipped With 6.2L Supercharged Engine Within the Drive Mode Set-Up screen, press the left / right arrows to scroll through all the available Drive Mode systems giving you a description of their operation and current configuration.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 • 700+ Transmission Press the “700+” button on the touchscreen to modify the output power of the engine to 700+. NOTE: This selection is only available with the red key fob. • 500 Press the “500” button on the touchscreen to modify the output power of the engine to 500.
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL • Sport Paddle Shifters – If Equipped With Automatic Transmission Press the “Sport” button on the touchscreen to provide faster shift speeds and will have a moderate comfort trade-off. • Street Press the “Street” button on the touchscreen to provide a balance of shift speed and comfort for typical daily driving.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 • Off • Track Press the “Off” button on the touchscreen to disable Press the “Track” button on the touchscreen to modify steering wheel paddle shifters. traction control to optimize track performance with the least stability control. Traction •...
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL • Sport Suspension Press the “Sport” button on the touchscreen to provide a firmer suspension stiffness with moderate comfort trade- off. • Street Press the “Street” button on the touchscreen to provide a balance of suspension stiffness and ride comfort for typical daily driving.
Page 259: Race Options
UNDERSTANDING YOUR INSTRUMENT PANEL 257 • Street Steering — If Equipped With 6.4L Engine Press the “Street button on the touchscreen to adjust the steering effort to the lowest level. RACE OPTIONS Steering • Track Press the “Track” button on the touchscreen to adjust the steering effort to the highest level.
Page 260: Launch Control
258 UNDERSTANDING YOUR INSTRUMENT PANEL Control screen. Within Race Options, you can activate, deactivate, and adjust the RPM values for the Launch Control and Shift Light features. Launch Control WARNING! Launch Mode is intended for off-highway or off-road use only and should not be used on any public roadways.
Page 261: Shift Light
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Control button on the instrument panel switch bank (if launch RPM limits will vary between the automatic trans- activated), or by pressing the “Cancel Launch Mode” missions (1500–3500 RPM) and manual transmissions button on the touchscreen. (2500–4500 RPM).
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL feature is a visual cue to manually up-shift using the paddle shifters or the transmission gear selector in manual shift mode. To actuate the Shift Light feature, press the “Shift Light” button on the touchscreen, then press the “Shift Light On” button on the touchscreen.
Page 263: Valet Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 261 The Shift Light RPM Set-Up allows you to set the shift light VALET MODE to actuate for gears 1, 2, 3, 4, and 5-8 (automatic transmis- sion) 1, 2, 3, 4, and 5-6 (manual transmission). Pressing and releasing the up/down arrow buttons on the touchscreen above and below each listed gear, the RPM values will change in increments of 250 RPM.
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL While in Valet Mode, the following vehicle configurations are set and locked to prevent unauthorized modification: • Engine limited to the lowest power output state. • On automatic transmission, transmission locks out ac- cess to first gear and up-shifts earlier than normal. •...
Page 265: Eco Mode - If Equipped With Automatic Transmission
UNDERSTANDING YOUR INSTRUMENT PANEL 263 NOTE: If your 4 digit PIN is lost or forgotten, the vehicle will exit Valet Mode after a battery disconnect for approxi- mately five minutes. Reconnect the battery and cycle the ignition to the RUN position; the vehicle will be in Default Mode.
Page 266: Ipod/Usb/Mp3 Control - If Equipped
264 UNDERSTANDING YOUR INSTRUMENT PANEL Press the “Eco” button on the touchscreen on the SRT Drive Modes main menu. Eco mode modifies the vehicle’s engine and transmission settings to provide improved fuel economy at a trade-off with acceleration performance. Increased engine exhaust noise and/or vibration may be noticed while Eco is active.
Page 267: Steering Wheel Audio Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 265 STEERING WHEEL AUDIO CONTROLS — IF Pushing the center button will make the radio switch between the various modes available (AM/FM/AUX etc.). EQUIPPED The remote sound system controls are located on the rear The left-hand control is a rocker-type switch with a push- surface of the steering wheel.
Page 268: Media Mode
266 UNDERSTANDING YOUR INSTRUMENT PANEL Media Mode Regulatory And Safety Information Pushing the top of the switch once will go to the next track USA/CANADA on the selected media (AUX, Bluetooth, SD Card). Pushing Exposure to Radio Frequency Radiation the bottom of the switch once will go to the beginning of The radiated output power of the internal wireless radio is the current track, or to the beginning of the previous track far below the FCC radio frequency exposure limits.
Page 269: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 267 • If this equipment does cause harmful interference to This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). radio or television reception, which can be determined Operation is subject to the following two conditions: by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of 1.
Page 270: Automatic Climate Control Overview
268 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Climate Control Overview Uconnect 8.4/8.4 NAV Automatic Climate Controls...
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 Automatic Climate Control Descriptions NOTE: Icons and descriptions can vary based upon vehicle equipment. Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. A/C Button Press and release to change the current setting, the indicator illuminates when A/C is on.
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL Icon Description AUTO Button Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the system to switch between manual mode and auto- matic modes. Refer to “Automatic Operation” for more information. Front Defrost Button Press and release to change the current airflow setting to Defrost mode.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 Icon Description SYNC Button Press the Sync button on the touchscreen to toggle the Sync feature on/off. The Sync indicator is illuminated when this feature is enabled. Sync is used to synchronize the passenger temperature setting with the driver temperature setting.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL Icon Description Bi-Level Mode Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. NOTE: BI-LEVEL mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 NOTE: CAUTION! • For Manual Climate Controls, if the system is in Mix, Failure to follow these cautions can cause damage to Floor or Defrost Mode, the A/C can be turned off, but the heating elements: the A/C system shall remain active to prevent fogging of •...
Page 276: Automatic Temperature Control (Atc) - If Equipped
274 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation Automatic Temperature Control (ATC) — If Equipped When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate Automatic Operation interior air by pressing the Recirculation control button. 1.
Page 277: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 275 NOTE: Operating Tips • It is not necessary to move the temperature settings for NOTE: Refer to the chart at the end of this section for cold or hot vehicles. The system automatically adjusts suggested control settings for various weather conditions. the temperature, mode, and blower speed to provide Summer Operation comfort as quickly as possible.
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL Vacation/Storage Outside Air Intake Any time you store your vehicle or keep it out of service Make sure the air intake, located directly in front of the (i.e., vacation) for two weeks or more, run the air condi- windshield, is free of obstructions such as leaves.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Control Setting Suggestions For Various Weather Conditions Control Settings Suggestions For Various Weather Conditions Chart...
Page 280: Personalized Menu Bar
278 UNDERSTANDING YOUR INSTRUMENT PANEL PERSONALIZED MENU BAR 1. Press the “Apps ” button to open the App screen. The Uconnect features and services in the main menu bar 2. Press and hold, then drag the selected App to replace an are easily changed for your convenience.
Page 281: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 279 Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instruc- tions.
Page 282: Basic Voice Commands
280 UNDERSTANDING YOUR INSTRUMENT PANEL 5. You can interrupt the help message or system prompts Basic Voice Commands by pushing the VR or Phone button and saying a Voice The basic Voice Commands below can be given at any Command from current category. point while using your Uconnect system.
Page 283: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 281 Notice the visual cues that inform you of your voice Push the VR button . After the beep, say recognition system’s status. Cues appear on the top of the • Tune to ninety-five-point-five FM touchscreen. •...
Page 284: Media
282 UNDERSTANDING YOUR INSTRUMENT PANEL Media Uconnect offers connections via USB, Bluetooth and auxil- iary ports (If Equipped). Voice operation is only available for connected USB and AUX devices. (Remote CD player optional and not available on all vehicles.) Push the VR button .
Page 285: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illuminated on your touchscreen, your system ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions. Push the Phone button .
Page 286: Climate (8.4/8.4 Nav)
284 UNDERSTANDING YOUR INSTRUMENT PANEL Climate (8.4/8.4 NAV) Too hot? Too cold? Adjust vehicle temperatures hands-free and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) Push the VR button . After the beep, say one of the following commands: •...
Page 287: Navigation (8.4/8.4 Nav)
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Navigation (8.4/8.4 NAV) The Uconnect navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect 8.4 system.) 1.
Page 288: Siriusxm Guardian (8.4/8.4 Nav) - If Equipped
286 UNDERSTANDING YOUR INSTRUMENT PANEL SiriusXM Guardian (8.4/8.4 NAV) — If Equipped Send & Go Vehicle Finder WARNING! Stolen Vehicle Assistance Some SiriusXM Guardian services, including SOS Call Remote Vehicle Start** and Roadside Assistance Call will NOT work without an operable LTE (voice/data) or 3G or 4G (data) net- Remote Horn &...
Page 289: Vehicle Health Report/Alert (8.4/8.4 Nav)
Alerts when it detects issues with its key systems that need Mobile App your attention. For further information go to the Owner To use the SiriusXM Guardian App: Site website (owners.dodge.com, or owners.chrysler.com). • Download the SiriusXM Guardian App to your mobile device. Mobile App (8.4/8.4 NAV) •...
Page 290: Siriusxm Travel Link (8.4/8.4 Nav)
288 UNDERSTANDING YOUR INSTRUMENT PANEL • Press the Location button on the navigation bar at the Push the VR button . After the beep, say one of the bottom of the app to bring up a map to locate your following commands: vehicle or send a location to your vehicle’s navigation •...
Page 291: Apple Carplay - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 289 Apple CarPlay — If Equipped Apple CarPlay allows you to use your voice to interact with Siri through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your iPhone and a number of its apps onto your Uconnect touchscreen.
Page 292: Android Auto - If Equipped
290 UNDERSTANDING YOUR INSTRUMENT PANEL Android Auto — If Equipped Android Auto allows you to use your voice to interact with Android’s best-in-class speech technology through your vehicle’s voice recognition system, and use your smart- phone’s data plan to project your Android powered smart- phone and a number of its apps onto your Uconnect touchscreen.
Page 293: General Information
UNDERSTANDING YOUR INSTRUMENT PANEL 291 General Information Additional Information This device complies with FCC rules Part 15 and Industry © 2016 FCA US LLC. All rights reserved. Mopar and Canada RSS-210. Operation is subject to the following two Uconnect are registered trademarks and Mopar Owner conditions: Connect is a trademark of FCA US LLC.
Page 295 STARTING AND OPERATING CONTENTS ▫ 1–4 Skip Shift ......305 STARTING PROCEDURES ....297 ▫...
Page 296 294 STARTING AND OPERATING ▫ Acceleration......324 ▫ Anti-Lock Brake Warning Light ... . .333 ▫...
Page 297 STARTING AND OPERATING 295 ▫ All Season Tires — If Equipped ... . .354 TIRE PRESSURE MONITOR SYSTEM (TPMS) . . .361 ▫ Summer Or Three Season Tires — If Equipped . .355 ▫...
Page 298 296 STARTING AND OPERATING ▫ Loading ......373 VEHICLE LOADING .....372 ▫...
Page 299: Starting Procedures
STARTING AND OPERATING 297 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave children or animals inside parked inside and outside mirrors, fasten your seat belt, and if vehicles in hot weather. Interior heat build-up may present, instruct all other occupants to buckle their seat cause serious injury or death.
Page 300: Keyless Enter-N-Go - Ignition
298 STARTING AND OPERATING Keyless Enter-N-Go — Ignition CAUTION! (Continued) • Shift into PARK only after the vehicle has come to a This feature allows the driver to operate complete stop. the ignition switch with the push of a • Shift into or out of REVERSE only after the vehicle button, as long as the ENGINE START/ has come to a complete stop and the engine is at idle STOP button is installed and the Remote...
Page 301 STARTING AND OPERATING 299 Using The ENGINE START/STOP Button — Manual pushes in a row and vehicle speed must be above 5 mph Transmission Only (8 km/h) before the engine will shut off. The ignition switch position will remain in the ACC position until the 1.
Page 302: Extreme Cold Weather
300 STARTING AND OPERATING NOTE: 1. Push the ENGINE START/STOP button once to change the ignition switch to the ACC position, • If the ignition switch is left in the ACC position, the system will automatically time out after 30 minutes of 2.
Page 303: After Starting
STARTING AND OPERATING 301 Clearing A Flooded Engine (Using ENGINE WARNING! (Continued) START/STOP Button) — Manual Transmission Only engine has started, ignite and damage the converter If the engine fails to start after you have followed the and vehicle. “Normal Starting” or “Extreme Cold Weather procedures, •...
Page 304: Manual Transmission - If Equipped
302 STARTING AND OPERATING The engine block heater cord is routed under the hood on CAUTION! the driver side of the vehicle. It has a removable cap that is • Never drive with your foot resting on the clutch located near the air box. pedal, or try to hold the vehicle on a hill with the WARNING! clutch pedal partially engaged, as this will cause...
Page 305: Shifting
STARTING AND OPERATING 303 • Due to the high performance nature of your drivetrain, you may hear your transmission. This can be most noticeable when the vehicle is idling in NEUTRAL with the clutch engaged (clutch pedal released), but it may also be heard when driving at low engine RPM.
Page 306: Recommended Shift Speeds
304 STARTING AND OPERATING The spring will try to pull the gear selector toward third and fourth gear. Make sure you move the gear selector into second or fifth gear. If you let the gear selector move in the direction of the pulling, you may end shifting from first to fourth or from sixth to third gear.
Page 307: 1-4 Skip Shift
STARTING AND OPERATING 305 MANUAL TRANSMISSION RECOMMENDED SHIFT SPEEDS Engine 6.2L Supercharged (km/h) (32) (40) (67) 6.4L (km/h) (32) (59) (77) Earlier upshifts during cruise conditions (relatively steady NOTE: The 1 - 4 Skip Shift feature is disabled when speeds) may result in increased fuel economy. selecting Track, Sport, or Custom Drive Modes.
Page 308: Automatic Transmission - If Equipped
306 STARTING AND OPERATING CAUTION! WARNING! (Continued) running. Before exiting a vehicle, always apply the • If you skip more than one gear while downshifting parking brake, shift the transmission into PARK, and or downshift at too high an engine speed, you could turn the ignition OFF.
Page 309: Ignition Park Interlock
STARTING AND OPERATING 307 Brake/Transmission Shift Interlock System CAUTION! This vehicle is equipped with a Brake Transmission Shift Damage to the transmission may occur if the following Interlock system (BTSI) that holds the gear selector in precautions are not observed: PARK unless the brakes are applied.
Page 310 308 STARTING AND OPERATING The transmission gear selector has PARK, REVERSE, NEU- TRAL, DRIVE, and MANUAL (Autostick) shift positions. Manual shifts can be made using the Autostick shift control (refer to “AutoStick” in this section for further informa- tion). Toggling the gear selector forward (-) or rearward (+) while in the MANUAL (AutoStick) position (beside the DRIVE position) will manually select the transmission gear, and will display the current gear in the instrument...
Page 311 STARTING AND OPERATING 309 PARK (P) WARNING! This range supplements the parking brake by locking the • Never use the PARK position as a substitute for the transmission. The engine can be started in this range. parking brake. Always apply the parking brake fully Never attempt to use PARK while the vehicle is in motion.
Page 312 310 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) engine is idling normally and your foot is firmly the ignition in the ACC or ON/RUN mode. A child pressing the brake pedal. could operate power windows, other controls, or • Unintended movement of a vehicle could injure move the vehicle.
Page 313 STARTING AND OPERATING 311 • With the brake pedal released, verify that the gear CAUTION! selector will not move out of PARK. Towing the vehicle, coasting, or driving for any other REVERSE (R) reason with the transmission in NEUTRAL can cause This range is for moving the vehicle backward.
Page 314 312 STARTING AND OPERATING During extremely cold temperatures (-22°F [-30°C] or be- message in the instrument cluster will inform the driver of low), transmission operation may be modified depending the more serious conditions, and indicate what actions may on engine and transmission temperature as well as vehicle be necessary.
Page 315: Autostick
STARTING AND OPERATING 313 NOTE: Even if the transmission can be reset, we recom- mend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnos- tic equipment to determine if the problem could recur. If the transmission cannot be reset, authorized dealer service is required.
Page 316 314 STARTING AND OPERATING in the MANUAL (M) position, tap the gear selector for- gear selector, or the shift paddles), unless an engine lug- ward (-) (or tap the (-) shift paddle on the steering wheel) ging or overspeed condition would result. It will remain in to downshift the transmission to the next lower gear, or tap the selected gear until another upshift or downshift is the lever rearward (+) (or tap the (+) shift paddle), to...
Page 317: Drive Modes
STARTING AND OPERATING 315 • You can start out, from a stop, in first or second gear. WARNING! Tapping (+) (at a stop) will allow starting in second gear. Starting out in second gear can be helpful in snowy or Do not downshift for additional engine braking on a icy conditions.
Page 318 316 STARTING AND OPERATING • CUSTOM MODE — This mode allows the driver to create a custom vehicle configuration that is saved for quick selection of favorite settings. The system will return to Default mode when the ignition switch is cycled from RUN to OFF to RUN, if this mode is selected.
Page 319 STARTING AND OPERATING 317 • Street — provides full traction control and full stability Listed below is a description of each of these settings: control. Transmission (Trans) Suspension (Susp) • Track — provides the fastest shift speeds and has the •...
Page 320 318 STARTING AND OPERATING • This selection is available with the RED or BLACK key • Transmission locks out access to first gear and shifts fob “500 HP”. earlier than normal. • Traction, Steering and Suspension are forced to STREET NOTE: 500 HP —...
Page 321: Launch Mode - If Equipped
STARTING AND OPERATING 319 performance. Increased engine exhaust noise and/or Preconditions: vibration may be noticed while Eco is active, this is • Launch Mode should not be used on public roads. normal and will not damage the vehicle. Always check track conditions and the surrounding area.
Page 322 320 STARTING AND OPERATING 2. Slide the RPM slider bar on the touchscreen. This screen Launch mode will be active until the vehicle reaches will allow you to adjust your launch RPM’s for opti- 62 mph (100 km/h), at which point the ESC system will mum launch/traction.
Page 323 STARTING AND OPERATING 321 NOTE: Pushing the SRT button on the center stack or 8. When conditions 4 through 7 have been met, the instru- pressing the “Apps” button on the touchscreen are two ment cluster display will read “Launch Ready Release other options to access launch mode features.
Page 324: Guidelines For Track Use
322 STARTING AND OPERATING • At the conclusion of each track event, it is recommended NOTE: After launch mode has been aborted, ESC will return to its current ESC mode. that a brake bleed procedure is performed to maintain the pedal feel and stopping capability of your Brembo CAUTION! High Performance brake system.
Page 325 STARTING AND OPERATING 323 • Tire pressure: 3. Do not continue for more than 1 full burnishing lap after • 40psi (276kpa) hot, recommend 32psi (221kpa) front, you start smelling the brakes. Do not get them smoking heavily. This will get them too hot and affect their life 30psi (207 kpa) rear cold negatively in future track use.
Page 326: Driving On Slippery Surfaces
324 STARTING AND OPERATING capacity. Resurfacing also thins the rotor cheek, making partial or complete loss of vehicle control and stopping it less robust and increasing the likelihood of pulsation ability. To reduce this possibility, the following precautions in further track use. should be observed: •...
Page 327: Flowing/Rising Water
STARTING AND OPERATING 325 Shallow Standing Water CAUTION! Although your vehicle is capable of driving through shal- • Due to lower ground clearance, driving your vehicle low standing water, consider the following Cautions and up steep driveways, approach ramps or near parking Warnings before doing so.
Page 328: Power Steering - 6.2L Supercharged Engine
326 STARTING AND OPERATING POWER STEERING — 6.2L SUPERCHARGED CAUTION! ENGINE • Always check the depth of the standing water before The hydraulic power steering system is sport tuned and driving through it. Never drive through standing will give you good vehicle response and increased ease of water that is deeper than the bottom of the tire rims maneuverability in tight spaces.
Page 329: Power Steering Fluid Check
STARTING AND OPERATING 327 WARNING! WARNING! Continued operation with reduced power steering as- Fluid level should be checked on a level surface and sist could pose a safety risk to yourself and others. with the engine off to prevent injury from moving Service should be obtained as soon as possible.
Page 330: Fuel Saver Technology - If Equipped
328 STARTING AND OPERATING electric steering system experiences a fault that prevents it NOTE: from providing assist, you will still have the ability to steer • Even if the power steering assistance is no longer the vehicle manually. operational, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in Alternate electric power steering efforts can be selected steering effort, especially at low speeds and during...
Page 331: Manual Transmission - If Equipped
STARTING AND OPERATING 329 When the parking brake is applied and the ignition switch Manual Transmission — If Equipped is in the ON position (RUN position with Keyless Enter- The foot operated parking brake is positioned below the N-Go), the “Brake Warning Light” in the instrument cluster lower left corner of the instrument panel.
Page 332 330 STARTING AND OPERATING WARNING! (Continued) When the keyless ignition is in the “OFF” mode, the transmission is locked in PARK, securing the vehicle against unwanted movement. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
Page 333: Brake System
STARTING AND OPERATING 331 OFF), the brakes will still function. The effort required to WARNING! (Continued) brake the vehicle will be much greater than that required injury. Also be certain to leave the automatic trans- with the power system operating. mission in PARK.
Page 334: Electronic Brake Force Distribution (Ebd)
332 STARTING AND OPERATING Electronic Brake Force Distribution (EBD) The ABS performs a self-check cycle to ensure that the ABS is working properly each time the vehicle is started and This function manages the distribution of the braking driven. During this self-check, you may hear a slight torque between the front and rear axles by limiting braking clicking sound as well as some related motor noises.
Page 335: Anti-Lock Brake Warning Light
STARTING AND OPERATING 333 ABS is designed to function with the OEM tires. Modifica- WARNING! (Continued) tion may result in degraded ABS performance. by improperly installed or high output radio trans- Anti-Lock Brake Warning Light mitting equipment. This interference can cause pos- sible loss of anti-lock braking capability.
Page 336: Hill Start Assist (Hsa)
334 STARTING AND OPERATING optimum pressure to the brakes. This can help reduce Hill Start Assist (HSA) braking distances. The BAS complements the anti-lock The HSA system is designed to mitigate roll back from a brake system (ABS). Applying the brakes very quickly complete stop while on an incline.
Page 337 STARTING AND OPERATING 335 • HSA will work in REVERSE gear and all forward gears. Towing With HSA The system will not activate if the transmission is in HSA will also provide assistance to mitigate roll back while PARK or NEUTRAL. For vehicles equipped with a towing a trailer.
Page 338: Traction Control System (Tcs)
336 STARTING AND OPERATING Disabling And Enabling HSA 6. Push the “ESC Off” button located in the lower switch bank below the climate control four times within twenty This feature can be turned on or turned off. To change the seconds.
Page 339: Electronic Stability Control (Esc)
STARTING AND OPERATING 337 will allow more engine torque to be applied to the wheel ESC system becomes active. The “ESC Activation/ that is not spinning. BLD may remain enabled even if TCS Malfunction Indicator Light” also flashes when the TCS is and ESC are in a reduced mode.
Page 340 338 STARTING AND OPERATING Partial Off WARNING! (Continued) The “Partial Off” mode is intended for times when a more • Vehicle modifications, or failure to properly main- spirited driving experience is desired. This mode may tain your vehicle, may change the handling charac- modify TCS and ESC thresholds for activation, which teristics of your vehicle, and may negatively affect allows for more wheel spin than normally allowed.
Page 341 STARTING AND OPERATING 339 NOTE: System may switch from ESC “Full Off” to Partial WARNING! mode when vehicle exceeds a predetermined speed. When • When in “Partial Off” mode, the TCS functionality the vehicle speed slows below the predetermined speed the system will return to ESC “Full Off”.
Page 342 340 STARTING AND OPERATING “ESC Activation/Malfunction Indicator Light” also flashes WARNING! (Continued) when TCS is active. If the “ESC Activation/Malfunction vehicle, nor can it increase the traction afforded by Indicator Light” begins to flash during acceleration, ease prevailing road conditions. ESC cannot prevent all up on the accelerator and apply as little throttle as possible.
Page 343: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 341 Electronic Roll Mitigation (ERM) WARNING! (Continued) This system anticipates the potential for wheel lift by leaving the roadway or striking objects or other ve- monitoring the driver’s steering wheel input and the speed hicles. The capabilities of an ERM-equipped vehicle of the vehicle.
Page 344: Tire Safety Information
342 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. •...
Page 345 STARTING AND OPERATING 343 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 346 344 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 347: Tire Identification Number (Tin)
STARTING AND OPERATING 345 Tire Identification Number (TIN) the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the The TIN may be found on one or both sides of the tire; outboard side, then you will find it on the inboard side of however, the date code may only be on one side.
Page 348: Tire Terminology And Definitions
346 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 349: Tire Loading And Tire Pressure
STARTING AND OPERATING 347 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
Page 350 348 STARTING AND OPERATING Tire And Loading Information Placard WARNING! (Continued) Over-inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes can cause damage that results in tire failure. Unequal tire pressures can cause steering problems. You could lose control of your vehicle.
Page 351 STARTING AND OPERATING 349 Loading To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of The vehicle maximum load on the tire must not exceed the occupants and cargo should never exceed XXX kg or load carrying capacity of the tire on your vehicle.
Page 352 350 STARTING AND OPERATING (4) The resulting figure equals the available amount of Metric Example For Load Limit cargo and luggage load capacity. For example, if “XXX” For example, if “XXX” amount equals 635 kg, and there amount equals 1400 lbs. and there will be five 150 lb will be five 68 kg passengers in your vehicle, the amount of passengers in your vehicle, the amount of available available cargo and luggage load capacity is 295 kg (635-...
Page 353 STARTING AND OPERATING 351 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them.
Page 354: Tires - General Information
352 STARTING AND OPERATING TIRES — GENERAL INFORMATION WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and vehicle control. satisfactory operation of your vehicle.
Page 355: Tire Inflation Pressures
STARTING AND OPERATING 353 Ride Comfort And Vehicle Stability driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. The Proper tire inflation contributes to a comfortable ride. cold tire inflation pressure must not exceed the maximum Over-inflation produces a jarring and uncomfortable ride.
Page 356: Radial Ply Tires
354 STARTING AND OPERATING maintaining correct tire inflation pressure is very impor- Tire Repair tant. Increased tire pressure and reduced vehicle loading If your tire becomes damaged, it may be repaired if it meets may be required for high-speed vehicle operation. Refer to the following criteria: your authorized tire dealer or original equipment vehicle •...
Page 357: Summer Or Three Season Tires - If Equipped
STARTING AND OPERATING 355 Summer Or Three Season Tires — If Equipped Snow Tires Summer tires provide traction in both wet and dry condi- Some areas of the country require the use of snow tires tions, and are not intended to be driven in snow or on ice. during the Winter.
Page 358: Tire Spinning
356 STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies”...
Page 359: Life Of Tire
STARTING AND OPERATING 357 Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with The service life of a tire is dependent upon varying factors oil, grease, and gasoline. including, but not limited to: Replacement Tires •...
Page 360: Tire Chains (Traction Devices)
358 STARTING AND OPERATING It is recommended you contact your authorized tire dealer WARNING! (Continued) or original equipment dealer with any questions you may • Failure to equip your vehicle with tires having ad- have on tire specifications or capability. Failure to use equate speed capability can result in sudden tire equivalent replacement tires may adversely affect the failure and loss of vehicle control.
Page 361: Tire Rotation Recommendations
STARTING AND OPERATING 359 TIRE ROTATION RECOMMENDATIONS Tire Rotation — Same Tire Size On Front And Rear Axle The tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, and The suggested rotation method for vehicles equipped with braking functions.
Page 362: Tire Rotation - Different Tire Size On Front And Rear Axle
360 STARTING AND OPERATING Tire Rotation — Different Tire Size On Front And DEPARTMENT OF TRANSPORTATION UNIFORM Rear Axle TIRE QUALITY GRADES The suggested rotation method is the “side-to-side” as The following tire grading categories were established shown in the following diagram. This method is required by the National Highway Traffic Safety Administration.
Page 363: Temperature Grades
STARTING AND OPERATING 361 on wet pavement, as measured under controlled condi- 109. Grades B and A represent higher levels of perfor- tions on specified government test surfaces of asphalt mance on the laboratory test wheel, than the minimum and concrete. A tire marked C may have poor traction required by law.
Page 364 362 STARTING AND OPERATING Refer to “Tires – General Information” in “Starting And NOTE: When filling warm tires, the tire pressure may need Operating” for information on how to properly inflate the to be increased up to an additional 4 psi (30 kPa) above the vehicle’s tires.
Page 365 STARTING AND OPERATING 363 NOTE: CAUTION! (Continued) • The TPMS is not intended to replace normal tire care and equipped on your vehicle. Undesirable system op- maintenance or to provide warning of a tire failure or eration or sensor damage may result when using condition.
Page 366: Premium System
364 STARTING AND OPERATING Premium System The TPMS consists of the following components: • Receiver module. The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to • Four TPM sensors. monitor tire pressure levels. Sensors mounted to each •...
Page 367 STARTING AND OPERATING 365 display in the instrument cluster will return the pressure 1. Signal interference due to electronic devices or driving values shown to their original color, and the “TPM Telltale next to facilities emitting the same radio frequencies as Light”...
Page 368: Tpms Deactivation - If Equipped
366 STARTING AND OPERATING 3. After driving the vehicle for up to 20 minutes above TPMS Deactivation — If Equipped 15 mph (24 km/h), the “TPM Telltale Light” will flash The TPMS can be deactivated if replacing all four wheel on and off for 75 seconds and then remain on solid.
Page 369: General Information
STARTING AND OPERATING 367 display pressure values in place of the dashes. On the next FUEL REQUIREMENTS ignition switch cycle the “SERVICE TPM SYSTEM” mes- 6.2L Supercharged And 6.4L Engine sage will no longer be displayed as long as no system fault exists.
Page 370: Reformulated Gasoline
368 STARTING AND OPERATING Reformulated Gasoline CAUTION! (Continued) Many areas of the country require the use of cleaner observe pump labels as they should clearly communi- burning gasoline referred to as “Reformulated Gasoline”. cate if a fuel contains greater than 15% ethanol (E-15). Reformulated gasoline contains oxygenates and are specifi- cally blended to reduce vehicle emissions and improve air Problems that result from using gasoline containing more...
Page 371: Cng And Lp Fuel System Modifications
STARTING AND OPERATING 369 CNG And LP Fuel System Modifications Materials Added To Fuel Modifications that allow the engine to run on compressed Besides using unleaded gasoline with the proper octane natural gas (CNG) or liquid propane (LP) may result in rating, gasolines that contain detergents, corrosion, and damage to the engine, emissions, and fuel system compo- stability additives are recommended.
Page 372: Fuel System Cautions
370 STARTING AND OPERATING Fuel System Cautions NOTE: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. CAUTION! Carbon Monoxide Warnings Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gasoline is prohibited by Federal WARNING! law.
Page 373: Adding Fuel
STARTING AND OPERATING 371 ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emissions control The gas cap is located behind the fuel filler door on the left system could result from using an improper fuel side of the vehicle.
Page 374: Loose Fuel Filler Cap Message
372 STARTING AND OPERATING NOTE: VEHICLE LOADING • Tighten the gas cap until you hear a “clicking” sound. The load carrying capacity of your vehicle is shown on the This is an indication that the gas cap is tightened “Vehicle Certification Label”. This information should be properly.
Page 375: Gross Vehicle Weight Rating (Gvwr)
STARTING AND OPERATING 373 Gross Vehicle Weight Rating (GVWR) The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for The GVWR is the total allowable weight of your vehicle. operation.
Page 376: Trailer Towing
374 STARTING AND OPERATING NOTE: Refer to the “Vehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. TRAILER TOWING Trailer towing with this vehicle is not recommended. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Two-Wheel Drive Recreational towing (with all four wheels on the ground, or using a tow dolly) is NOT ALLOWED.
Page 377 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Jump-Starting Procedure ....388 HAZARD WARNING FLASHERS ... .376 IF YOUR ENGINE OVERHEATS .
Page 378: Hazard Warning Flashers
376 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the switch In any of the following situations, you can reduce the bank near the bottom center of the instrument panel. potential for overheating by taking the appropriate action.
Page 379: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 377 Torque Specifications WARNING! (Continued) open the hood until the radiator has had time to cool. Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/Bolt Never try to open a cooling system pressure cap when Bolt Size Socket Size the radiator or coolant bottle is hot.
Page 380: Tire Service Kit - If Equipped
378 WHAT TO DO IN EMERGENCIES TIRE SERVICE KIT — IF EQUIPPED Description Small punctures up to 1/4 inch (6 mm) in the tire tread can be sealed with Tire Service Kit. Foreign objects (e.g., screws or nails) should not be removed from the tire. Tire Service Kit can be used in outside temperatures down to approxi- mately -4°F (-20°C).
Page 381: Tire Service Kit Storage
WHAT TO DO IN EMERGENCIES 379 Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is located in the trunk. Tire Service Kit Components Tire Service Kit Location 1 — Sealant Bottle 5 — Mode Select Knob 2 —...
Page 382: Tire Service Kit Usage Precautions
380 WHAT TO DO IN EMERGENCIES Using The Mode Select Knob And Hoses Tire Service Kit Usage Precautions • Replace the Tire Service Kit Sealant Bottle (1) and Sealant Your Tire Service Kit is equipped with the following Hose (6) prior to the expiration date (printed at the symbols to indicate the air or sealant mode.
Page 383 WHAT TO DO IN EMERGENCIES 381 • When the Tire Service Kit sealant is in a liquid form, WARNING! clean water, and a damp cloth will remove the material • Do not attempt to seal a tire on the side of the vehicle from the vehicle or tire and wheel components.
Page 384: Sealing A Tire With Tire Service Kit
382 WHAT TO DO IN EMERGENCIES 2. Verify that the valve stem (on the wheel with the WARNING! (Continued) deflated tire) is in a position that is near to the ground. in injuries that are serious or fatal to you, your This will allow the Tire Service Kit Hoses (6) and (7) to passengers, and others around you.
Page 385 WHAT TO DO IN EMERGENCIES 383 5. Uncoil the Power Plug (8) and insert the plug into the Select Knob (5) is in the Sealant Mode position and not vehicle’s 12 Volt power outlet. Air Mode. Push the Power Button (4) to turn on the Tire Service Kit.
Page 386 384 WHAT TO DO IN EMERGENCIES 2. The pump will start to inject air into the tire immedi- 3. Immediately disconnect the Sealant Hose (6) from the ately after the Sealant Bottle (1) is empty. Continue to valve stem, reinstall the cap on the fitting at the end of operate the pump and inflate the tire to the pressure the hose, and place the Tire Service Kit in the vehicle indicated on the tire pressure label on the driver-side...
Page 387 WHAT TO DO IN EMERGENCIES 385 If tire pressure is less than 19 psi (1.3 Bar): WARNING! The tire is too badly damaged. Do not attempt to drive the Tire Service Kit is not a permanent flat tire repair. Have vehicle further.
Page 388: Jump-Starting Procedures
386 WHAT TO DO IN EMERGENCIES 5. Remove the Speed Limit sticker from the instrument 5. Position the new Sealant Bottle (1) in the housing so that panel after the tire has been repaired. the Sealant Hose (6) aligns with the hose slot in the front of the housing.
Page 389: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 387 WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alter- nator or electrical system may occur.
Page 390: Jump-Starting Procedure
388 WHAT TO DO IN EMERGENCIES Jump-Starting Procedure WARNING! (Continued) • Remove any metal jewelry such as rings, watch WARNING! bands and bracelets that could make an inadvertent Failure to follow this jump-starting procedure could electrical contact. You could be seriously injured. •...
Page 391: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 389 4. Connect the opposite end of the negative (-) jumper 3. Disconnect the positive (+) end of the jumper cable from cable to the remote negative (-) post of the vehicle with the positive (+) post of the booster battery. the discharged battery.
Page 392 390 WHAT TO DO IN EMERGENCIES back and forth between DRIVE and REVERSE (with auto- NOTE: Push the ESC Off switch to place the Electronic matic transmission) or FIRST GEAR and REVERSE (with Stability Control (ESC) system in Partial Off mode before manual transmission), while gently pressing the accelera- rocking the vehicle.
Page 393: Manual Park Release - 8 Speed Transmission
WHAT TO DO IN EMERGENCIES 391 Follow these steps to use the Manual Park Release: CAUTION! (Continued) 1. Firmly apply the parking brake. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It 2.
Page 394 392 WHAT TO DO IN EMERGENCIES Locking Tab Tether Strap 5. While holding the locking tab in the disengaged posi- To Reset The Manual Park Release: tion, pull the tether strap to rotate the lever up and 1. Push the latch (at the base of the lever, on the rear side) rearward until it locks in place in the vertical position.
Page 395: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 393 TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground AUTOMATIC TRANSMISSION/ MANUAL TRANSMISSION Flat Tow NONE If transmission is operable: •...
Page 396: Automatic Transmission
394 WHAT TO DO IN EMERGENCIES miles (48 km), then the only acceptable method of towing CAUTION! (Continued) is with a flatbed truck. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Dam- CAUTION! age to your vehicle may occur from improper towing.
Page 397: Enhanced Accident Response System (Ears)
WHAT TO DO IN EMERGENCIES 395 If the transmission is not operable, then the only acceptable EVENT DATA RECORDER (EDR) method of towing is with a flatbed truck. This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain CAUTION! crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist...
Page 399 MAINTAINING YOUR VEHICLE CONTENTS ▫ Maintenance-Free Battery ....408 ENGINE COMPARTMENT — 6.2L SUPERCHARGED ....399 ▫...
Page 400 398 MAINTAINING YOUR VEHICLE ▫ Tail/Turn And Stop Lamp....442 FUSES ....... .428 ▫...
Page 401: Engine Compartment - 6.2L Supercharged
MAINTAINING YOUR VEHICLE 399 ENGINE COMPARTMENT — 6.2L SUPERCHARGED 1 — Washer Fluid Reservoir 7 — Brake Fluid Reservoir Access Cover 2 — Remote Jump Start (Positive Battery Post) 8 — Engine Coolant Reservoir 3 — Power Distribution Center (Fuses) 9 —...
Page 402: Engine Compartment - 6.4L
400 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.4L 1 — Washer Fluid Reservoir 6 — Brake Fluid Reservoir 2 — Remote Jump Start (Positive Battery Post) 7 — Engine Coolant Reservoir 3 — Power Distribution Center (Fuses) 8 — Air Cleaner Filter 4 —...
Page 403: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 401 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! (Continued) Your vehicle is equipped with a sophisticated onboard • If the MIL is flashing while the engine is running, diagnostic system called OBD II. This system monitors the severe catalytic converter damage and power loss performance of the emissions, engine, and automatic trans- will soon occur.
Page 404: Loose Fuel Filler Cap
402 MAINTAINING YOUR VEHICLE EMISSIONS INSPECTION AND MAINTENANCE WARNING! (Continued) PROGRAMS vehicle control could occur that may result in an In some localities, it may be a legal requirement to pass an accident involving serious injury or death. inspection of your vehicle’s emissions control system. •...
Page 405: Replacement Parts
MAINTAINING YOUR VEHICLE 403 2. As soon as you cycle the ignition to the ON mode, you Regardless of whether your vehicle’s OBD II system is will see the “Malfunction Indicator Light (MIL)” symbol ready or not, if the MIL is illuminated during normal come on as part of a normal bulb check.
Page 406: Maintenance Procedures
404 MAINTAINING YOUR VEHICLE WARNING! CAUTION! (Continued) have potential malfunctions examined by an autho- You can be badly injured working on or around a rized dealer or qualified repair center. motor vehicle. Only do service work for which you • Your vehicle has been built with improved fluids have the knowledge and the proper equipment.
Page 407 MAINTAINING YOUR VEHICLE 405 oil level in the “SAFE” range. Adding 1.0 quart (.95 liters) The manufacturer recommends the use of Pennzoil Ultra of oil when the reading is at the bottom of the “SAFE” 0W-40 engine or equivalent Mopar oil meeting the FCA range will result in an oil level at the top of the “SAFE”...
Page 408 406 MAINTAINING YOUR VEHICLE Synthetic Engine Oils the service technician to drain both the engine oil pan and the engine oil cooler to properly perform the engine oil You may use synthetic engine oils provided the recom- change procedure. Failure to drain the engine oil cooler mended oil quality requirements are met, and the recom- will result in overfilling your vehicle’s engine oil system.
Page 409: Engine Oil Filter
MAINTAINING YOUR VEHICLE 407 Engine Air Cleaner Filter WARNING! (Continued) Refer to the “Maintenance Schedule” for the proper main- have any doubt about your ability to perform a service tenance intervals. job, take your vehicle to a competent mechanic. WARNING! Disposing Of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and The air induction system (air cleaner, hoses, etc.) can...
Page 410: Maintenance-Free Battery
408 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery. • Battery fluid is a corrosive acid solution and can You will never have to add water, nor is periodic mainte- burn or even blind you. Do not allow battery fluid to nance required.
Page 411: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 409 CAUTION! (Continued) WARNING! (Continued) positive post and the negative cable is attached to the system. Some unapproved refrigerants are flam- negative post. Battery posts are marked positive (+) mable and can explode, injuring you. Other unap- and negative (-) and are identified on the battery proved refrigerants or lubricants can cause the sys- case.
Page 412 410 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R134a — If A/C Air Filter Equipped The filter is located in the fresh air inlet under the hood, R-134a Air Conditioning Refrigerant is a hydrofluoro- behind a removable panel in the cowl on the passenger side carbon (HFC) that is endorsed by the Environmental of the vehicle, next to the windshield wipers.
Page 413: Body Lubrication
MAINTAINING YOUR VEHICLE 411 Filter Access Cover A/C Air Filter 3. Remove the used filter. 5. Close the filter access cover. 4. Install the new filter with arrows pointing in the direc- Refer to the “Maintenance Schedule” for the proper main- tion of airflow, which is toward the rear of the vehicle tenance intervals.
Page 414: Windshield Wiper Blades
412 MAINTAINING YOUR VEHICLE clean to remove dust and grit; after lubricating excess oil NOTE: Life expectancy of wiper blades varies depending and grease should be removed. Particular attention should on geographical area and frequency of use. Poor perfor- also be given to hood latching components to ensure mance of blades may be present with chattering, marks, proper function.
Page 415: Exhaust System
MAINTAINING YOUR VEHICLE 413 WARNING! WARNING! • Exhaust gases can injure or kill. They contain carbon Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care monoxide (CO), which is colorless and odorless. must be exercised when filling or working around the Breathing it can make you unconscious and can washer solution.
Page 416: Cooling System
414 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: CAUTION! (Continued) • Do not shut off the engine or interrupt the ignition when • Damage to the catalytic converter can result if your the transmission is in gear and the vehicle is in motion. vehicle is not kept in proper operating condition.
Page 417 MAINTAINING YOUR VEHICLE 415 radiator. Inspect the entire system for leaks. DO NOT WARNING! (Continued) REMOVE THE COOLANT PRESSURE CAP WHEN THE at any time the ignition switch is in the ON position COOLING SYSTEM IS HOT. (RUN position for Keyless Enter-N-Go). Cooling System —...
Page 418 416 MAINTAINING YOUR VEHICLE Adding Coolant CAUTION! Your vehicle has been built with an improved engine • Mixing of engine coolant (antifreeze) other than coolant (OAT coolant conforming to MS.90032) that allows specified Organic Additive Technology (OAT) en- extended maintenance intervals. This engine coolant (anti- gine coolant (antifreeze), may result in engine dam- freeze) can be used up to ten years or 150,000 miles age and may decrease corrosion protection.
Page 419 MAINTAINING YOUR VEHICLE 417 • Use only high purity water such as distilled or deionized Cooling System Pressure Caps water when mixing the water/engine coolant (anti- The cap must be fully tightened to prevent loss of engine freeze) solution. The use of lower quality water will coolant (antifreeze), and to ensure that engine coolant reduce the amount of corrosion protection in the engine (antifreeze) will return to the radiator from the coolant...
Page 420 418 MAINTAINING YOUR VEHICLE Disposal Of Used Engine Coolant When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not Used ethylene glycol-based engine coolant (antifreeze) is a overfill. regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for Points To Remember your community.
Page 421: Brake System
MAINTAINING YOUR VEHICLE 419 • Maintain engine coolant (antifreeze) concentration at a WARNING! minimum of 50% OAT coolant (conforming to MS.90032) and distilled water for proper corrosion pro- Riding the brakes can lead to brake failure and possi- tection of your engine which contains aluminum com- bly a collision.
Page 422: Clutch Hydraulic System (Manual Transmission) - If Equipped
420 MAINTAINING YOUR VEHICLE fluid level can be expected to fall as the brake pads wear. WARNING! (Continued) However, low fluid level may be caused by a leak and a to boil unexpectedly during hard or prolonged brak- checkup may be needed. ing, resulting in sudden brake failure.
Page 423: Manual Transmission - If Equipped
MAINTAINING YOUR VEHICLE 421 In the event of leakage or wear, use only the manufactur- only the manufacturer’s specified transmission fluid. Refer er’s recommended brake fluid. Refer to “Fluids, Lubri- to “Fluids, Lubricants, And Genuine Parts” in this section cants, And Genuine Parts” in “Maintaining Your Vehicle” for fluid specifications.
Page 424: Rear Axle
422 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) may occur. Your authorized dealer has the proper tools Do not use chemical flushes in your transmission as to adjust the fluid level accurately. the chemicals can damage your transmission compo- nents. Such damage is not covered by the New Vehicle Fluid And Filter Changes Limited Warranty.
Page 425: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 423 Change Axle Fluid The most common causes are: • Road salt, dirt and moisture accumulation. Refer to the “Maintenance Schedule” for the proper main- tenance intervals. • Stone and gravel impact. Appearance Care And Protection From Corrosion •...
Page 426 424 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, CAUTION! de-icer salt, etc., be sure that such materials are well • Do not use abrasive or strong cleaning materials such packaged and sealed. as steel wool or scouring powder that will scratch •...
Page 427 MAINTAINING YOUR VEHICLE 425 NOTE: Many aftermarket wheel cleaners contain strong CAUTION! acids or strong alkaline additives that can harm the wheel surface. Do not use scouring pads, steel wool, a bristle brush, metal polishes or oven cleaner. These products may CAUTION! damage the wheel’s protective finish.
Page 428 426 MAINTAINING YOUR VEHICLE Use Mopar Total Clean to clean vinyl upholstery. CAUTION! (Continued) Mopar Total Clean is specifically recommended for leather CLOTH. Used on a regular basis; this is all that is upholstery. required to maintain this finish. Your leather upholstery can be best preserved by regular Stain Repel Fabric Cleaning Procedure —...
Page 429 MAINTAINING YOUR VEHICLE 427 remove road dirt, wash with a mild soap solution followed CAUTION! by rinsing. Direct contact of air fresheners, insect repellents, sun- Do not use abrasive cleaning components, solvents, steel tan lotions, or hand sanitizers to the plastic, painted, or wool or other aggressive material to clean the lenses.
Page 430: Fuses
428 MAINTAINING YOUR VEHICLE 2. Dry with a soft cloth. Cleaning The Center Console Cupholders Clean with a damp cloth or towel using a mild detergent Seat Belt Maintenance with the cupholder in the center console. Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners.
Page 431: Front Power Distribution Center (Fuses)
MAINTAINING YOUR VEHICLE 429 Front Power Distribution Center (Fuses) CAUTION! The Front Power Distribution Center is located in the • When installing the power distribution center cover, engine compartment. This module contains fuses and it is important to ensure the cover is properly posi- relays.
Page 432 430 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare 40 Amp Green – Radiator Fan #1 – (Non 6.2L Supercharged) 50 Amp Red – Electric Power Steering #1 – If Equipped / Radia- tor Fan (6.2L Supercharged) – If Equipped 30 Amp Pink –...
Page 433 MAINTAINING YOUR VEHICLE 431 Cavity Cartridge Fuse Mini-Fuse Description 50 Amp Red – Electric Power Steering #2 – If Equipped / Radia- tor Fan #2 (6.2L Supercharged) 30 Amp Pink – Wiper Motor 30 Amp Pink – Headlamp Washers – If Equipped 20 Amp Blue –...
Page 434: Rear Power Distribution Center (Fuses)
432 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Engine Controller / Rad Fan Relays (Charger/300) / Electric Power Steering Module (Charger/300) / 5-Speed TCM – 10 Amp Red Airbag Module – 10 Amp Red EPS (Challenger) / EHPS (Police) / AC Clutch Re- lay / Vacuum Pump Relay / Rad Fan Relays (Challenger) –...
Page 435 MAINTAINING YOUR VEHICLE 433 CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly posi- tioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Page 436 434 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green – Exterior Lighting #1 40 Amp Green – Exterior Lighting #2 30 Amp Pink – Interior Lighting 40 Amp Green – Power Locks 30 Amp Pink – Driver Door Control Module 30 Amp Pink –...
Page 437 MAINTAINING YOUR VEHICLE 435 Cavity Cartridge Fuse Mini-Fuse Description – 15 Amp Blue Cygnus Transmission Module (Charger/300) / Electronic Shift Module (Charger/300) – 25 Amp Clear Amplifier – If Equipped – 25 Amp Breaker Power Seats – If Equipped – 15 Amp Blue HVAC Module/Cluster –...
Page 438 436 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 20 Amp Yellow Comfort Seat And Steering Wheel Module (Heated Steering Wheel/RR Heated Seats) – 10 Amp Red Park Assist / Blind Spot / Rear View Camera – 15 Amp Blue Cluster / Rearview Mirror / Compass (Charger/300) / Hu- midity Sensor / Forward Facing...
Page 439 MAINTAINING YOUR VEHICLE 437 Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red HVAC Module/In Vehicle Tem- perature Sensor – – Fuse – Spare – – Fuse – Spare – – Fuse – Spare – – Fuse – Spare – 10 Amp Red Airbag Module –...
Page 440: Vehicle Storage
438 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Dual USB Power Outlet – R/A Sense (Charger/300) Rear Sun- shade (Charger/300) RR USB Timer – – Fuse – Spare – – Fuse – Spare • Anytime you store your vehicle, or keep it out of service VEHICLE STORAGE (e.g., vacation) for two weeks or more, run the air If you are leaving your vehicle dormant for more than 21...
Page 441: Replacement Bulbs
MAINTAINING YOUR VEHICLE 439 REPLACEMENT BULBS All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. Interior Bulbs Bulb Number Rear Courtesy/Reading Lamps Rear Compartment (Trunk) Lamp Overhead Console Reading Lamps Visor Vanity Lamps A6220...
Page 442: Bulb Replacement
440 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Headlamp – High Intensity Discharge (HID) D3S (Serviced At Authorized Dealer) * Halogen Headlamp HIR2LL Front Park/Turn Lamp LED (Serviced At Authorized Dealer) Front Fog Lamp H11LL Front Side Marker LED (Serviced At Authorized Dealer) Tail Lamp LED (Serviced At Authorized Dealer) Stop/Turn Lamp...
Page 443: Low Beam Headlamp, High Beam Headlamp
MAINTAINING YOUR VEHICLE 441 Low Beam Headlamp, High Beam Headlamp, 2. Remove the air cleaner filter cover by removing three fasteners and loosening the clean air inlet clamp and Park/Turn Lamp — Models With Halogen then rotate cover off to the side. Headlamps —...
Page 444: Low Beam Headlamp, High Beam Headlamp
442 MAINTAINING YOUR VEHICLE Low Beam Headlamp, High Beam Headlamp, And Front/Rear Side Marker Lamp Park/Turn Lamp — Models With High Intensity The Side Markers use LED lamps that are not serviceable Discharge (HID) Headlamps — If Equipped separately. The Side Markers must be replaced as an assembly, see your authorized dealer.
Page 445: Fluid Capacities
MAINTAINING YOUR VEHICLE 443 FLUID CAPACITIES Fluid Capacities — SRT 6.2L U.S. Metric Fuel (Approximate) 91 Octane or higher, 0-15% Ethanol 18.5 Gallons 70 Liters Engine Oil With Filter SAE 0W-40, Synthetic API Certified 7 Quarts 6.6 Liters Cooling System * Engine: Mopar Antifreeze/Engine Coolant (OAT coolant conforming 15 Quarts 14.4 Liters...
Page 446: Fluid Capacities - Srt 6.4L
444 MAINTAINING YOUR VEHICLE Fluid Capacities — SRT 6.4L U.S. Metric Fuel (Approximate) 91 Octane or higher, 0-15% Ethanol 18.5 Gallons 70 Liters Engine Oil With Filter SAE 0W-40, Synthetic API Certified 7 Quarts 6.6 Liters Cooling System * Mopar Antifreeze/Engine Coolant (OAT coolant conforming to 15 Quarts 14.4 Liters MS.90032) 10 Year/150,000 Mile Formula or equivalent...
Page 447: Engine
MAINTAINING YOUR VEHICLE 445 CAUTION! (Continued) CAUTION! (Continued) • Do not use water alone or alcohol-based engine • This vehicle has not been designed for use with coolant (antifreeze) products. Do not use additional propylene glycol-based engine coolant (antifreeze). rust inhibitors or antirust products, as they may not Use of propylene glycol-based engine coolant (anti- be compatible with the radiator engine coolant and freeze) is not recommended.
Page 448: Chassis
446 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – If Equipped We recommend you use Mopar ATF+4 Automatic Transmission Fluid. Automatic Transmission – If Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equiva- Equipped lent.
Page 449 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart .....450 MAINTENANCE SCHEDULE ....448...
Page 450 448 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE NOTE: • The oil change indicator message will not monitor the The Scheduled Maintenance services listed in this manual time since the last oil change. Change your vehicle’s oil must be done at the times or mileages specified to protect if it has been six months since your last oil change, even your vehicle warranty and ensure the best vehicle perfor- if the oil change indicator message is NOT illuminated.
Page 451 MAINTENANCE SCHEDULES 449 • Check all lights and other electrical items for correct At Each Stop For Fuel operation. • Check the engine oil level. Refer to “Maintenance Procedures/Engine Oil” in “Maintaining Your Vehicle” At Each Oil Change for further information. •...
Page 452: Maintenance Chart
450 MAINTENANCE SCHEDULES Maintenance Chart Miles: Or Months: 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter.
Page 453 MAINTENANCE SCHEDULES 451 Miles: Or Months: 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Inspect the rear axle fluid. Change the manual transmission fluid – if equipped.
Page 454 452 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 455 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ......454 Impaired (TDD/TTY) .
Page 456: Suggestions For Obtaining Service For Your Vehicle
454 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally interested in your satisfaction. We want you to be happy Prepare For The Appointment with our products and services. If you are having warranty work done, be sure to bring the right papers with you, as well as your warranty folder.
Page 457: Fca Us Llc Customer Center
IF YOU NEED CONSUMER ASSISTANCE 455 Any communication to the manufacturer’s customer center In Mexico Contact should include the following information: Av. Prolongacion Paseo de la Reforma, 1240 • Owner’s name and address Sante Fe C.P. 05109 • Owner’s telephone number (home and office) Mexico, D.
Page 458: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
456 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech questions about the service contract, call the manufactur- er’s Service Contract National Customer Hotline at 1-800- Impaired (TDD/TTY) 521-9922 (Canadian residents, call (800) 465-2001 English / To assist customers who have hearing difficulties, the (800) 387-9983 French).
Page 459: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 457 REPORTING SAFETY DEFECTS WARNING! In The 50 United States And Washington, D.C. Engine exhaust (internal combustion engines only), If you believe that your vehicle has a defect that could some of its constituents, and certain vehicle compo- cause a crash or cause injury or death, you should nents contain, or emit, chemicals known to the State of immediately inform the National Highway Traffic...
Page 460: In Canada
458 IF YOU NEED CONSUMER ASSISTANCE In Canada Diagnostic Procedure Manuals If you believe that your vehicle has a safety defect, you Diagnostic Procedure Manuals are filled with diagrams, should contact the Customer Service Department imme- charts and detailed illustrations. These practical manuals diately.
Page 461 INDEX...
Page 462 460 INDEX About Your Brakes ..... .328, 331 Air Bag Maintenance ......53 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 463 INDEX 461 Automatic Door Locks......24 Brake Assist System ......333 Automatic Headlights .
Page 464 462 INDEX Center High Mounted Stop Light ....442 Contract, Service ......456 Certification Label .
Page 465 INDEX 463 Defroster, Rear Window ..... .166 Electrical Power Outlets ..... .160 Defroster, Windshield .
Page 466 464 INDEX Coolant (Antifreeze) ....415, 444, 445 Filler Location Fuel ......371 Cooling .
Page 467 INDEX 465 Fuel ........367 Gross Vehicle Weight Rating ....373 Adding .
Page 468 466 INDEX Hill Start Assist ......334 Key Fob HomeLink (Garage Door Opener) ....150 Arm The Alarm .
Page 469 INDEX 467 Lap/Shoulder Belts ......35 Headlight Switch ......105 Latches .
Page 470 468 INDEX Capacities ......373 Manual Park Release ......391 Tires .
Page 471 INDEX 469 Capacity ......443, 444 Paint Care....... .423 Change Interval .
Page 472 470 INDEX Forward ....... .95 Recreational Towing......374 Power Lumbar .
Page 473 INDEX 471 Replacement Tires ......357 Seat Belt Reminder ......34 Reporting Safety Defects .
Page 474 472 INDEX Disarm The System ......15 Specifications Selection Of Coolant (Antifreeze) ... .444, 445 Fuel (Gasoline) .
Page 475 INDEX 473 Wheel, Tilt ......116 Air Pressure ......347, 352 Steering Wheel Audio Controls .
Page 476 474 INDEX Traction ....... . .324 Uconnect Settings ......225 Traction Control .
Page 477 INDEX 475 Wheel And Wheel Trim ..... .424 Wheel And Wheel Trim Care ....424 Wind Buffeting .
Page 483 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.

This manual is also suitable for:

Challenger hellcat 2017

Dodge CHALLENGER SRT 2017 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge CHALLENGER SRT 2017

Summary of Contents for Dodge CHALLENGER SRT 2017