Before You Begin Programming Homelink - Dodge Challenger SRT 2016 Owner's Manual

202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
HomeLink Buttons
NOTE: HomeLink is disabled when the Vehicle Security
Alarm is active.

Before You Begin Programming HomeLink

Be sure that your vehicle is parked outside of the garage
before you begin programming.
For more efficient programming and accurate transmis-
sion of the radio-frequency signal, it is recommended
that a new battery be placed in the hand-held transmitter
of the device that is being programmed to the HomeLink
system.
To erase the channels, place the ignition in the ON/RUN
position and push and hold the two outside HomeLink
buttons (I and III) for up 20 seconds or until the red
indicator flashes.