Dodge Viper SRT 2015 Owner's Manual

Table of Contents

Quick Links

Download this manual

Viper SRT

2 0 1 5

O W N E R ' S M A N U A L

Table of Contents

Chapters

Table of Contents

Summary of Contents for Dodge Viper SRT 2015

Page 1 Viper SRT 2 0 1 5 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3 TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new FCA US LLC nicians and genuine parts, and cares about your satisfac- vehicle. Be assured that it represents precision workman- tion.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System .....17 A WORD ABOUT YOUR KEYS ... . .11 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ General Information ....24 ▫ Supplemental Restraint System (SRS) ..44 ▫...
Page 13: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS NOTE: In case the ignition does not change with the push of a button, the RKE transmitter (Key Fob) may Your vehicle uses a keyless ignition system. This system have a low or dead battery.
Page 14: Key Fob
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead.
Page 15: Ignition Or Accessory On Message
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: With the Uconnect® system, the power window switches, radio and power outlets will remain active for up to 10 minutes after the ignition is cycled to the OFF position. Opening either front door will cancel this feature.
Page 16: Sentry Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) CAUTION! • Allowing children to be in a vehicle unattended is An unlocked car is an invitation to thieves. Always dangerous for a number of reasons. A child or remove the Key Fob from vehicle, place the ignition others could be seriously or fatally injured.
Page 17: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 operation. Therefore, only Key Fobs that are pro- CAUTION! grammed to the vehicle can be used to start and operate • Do not make modifications or alterations to the the vehicle. The system will not allow the engine to crank with an invalid Key Fob.
Page 18: Customer Key Programming
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming CAUTION! Programming Key Fobs or RKE transmitters may be • Always remove the Key Fobs from the vehicle and performed at an authorized dealer. lock all doors when leaving the vehicle unat- General Information tended.
Page 19: Vehicle Security Alarm System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 VEHICLE SECURITY ALARM SYSTEM 2. Perform one of the following methods to lock the vehicle: The Vehicle Security Alarm monitors the doors, liftgate, • Push LOCK on the interior power door lock switch and hood for unauthorized entry and the ignition for with the driver and/or passenger door open.
Page 20: To Disarm The System
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disarm The System system will give you a false alarm. If one of the previ- ously described arming sequences has occurred, the The Vehicle Security Alarm can be disarmed using any of Vehicle Security Alarm will arm regardless of whether the following methods: you are in the vehicle or not.
Page 21: Illuminated Entry
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Electronic Immobilization System The interior lights will turn on, remain on for about four seconds, and then fade to off if a door is opened using the The Electronic Immobilization system prevents unau- inside door handle.
Page 22: Remote Keyless Entry (Rke)
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) To Unlock The Doors The RKE system allows you to lock or unlock the doors Push and release the UNLOCK button on the RKE and liftgate, or activate the Panic Alarm from distances transmitter once to unlock the driver’s door or twice to up to approximately 66ft (20 m) using a hand-held Key unlock both doors and the liftgate.
Page 23: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Flash Lights With Lock Sound Horn With Remote Key Lock This feature lets you program the lights to flash when the This feature will cause the horn to chirp when the doors doors are locked with the Remote Keyless Entry (RKE) are locked with the RKE transmitter.
Page 24: Programming Additional Transmitters
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Panic Alarm will stay on for three minutes unless Transmitter Battery Replacement you turn it off by either pushing the PANIC button a The recommended replacement battery is one CR2032 second time or drive the vehicle at a speed of 15 mph battery.
Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Emergency Key Removal Separating The RKE Transmitter Case 2. Insert the tip of the emergency key or a #2 flat blade 3. Remove the battery by turning the back cover over screwdriver into the slot and gently pry the two halves (battery facing downward) and tapping it lightly on a of the RKE transmitter apart.
Page 26: General Information
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE new battery with your fingers. Skin oils may cause If your RKE transmitter fails to operate from a normal battery deterioration. If you touch a battery, clean it distance, check for these two conditions: with rubbing alcohol.
Page 27: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Power Door Locks WARNING! (Continued) A power door lock switch is on each door trim panel. Use • For personal security in the event of an collision, this switch to lock or unlock the doors. lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you push the power door lock switch while the ignition WARNING! (Continued) is in the ACC or ON/RUN position, and any front door • Do not leave the Key Fob in or near the vehicle, or is open, the power locks will not operate.
Page 29: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Automatic Unlock Doors On Exit WINDOWS The doors will unlock automatically on vehicles with Power Windows power door locks if: The window controls on the driver’s door control both of 1. The Automatic Unlock Doors On Exit feature is en- the door windows.
Page 30: Auto-Down Feature
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are single window controls on the passenger door WARNING! (Continued) trim panel, which operate the passenger door window. ignition of a vehicle equipped with Keyless Enter-N- The window controls will operate only when the ignition Go™...
Page 31: Auto-Up Feature With Anti-Pinch Protection
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • If the window detects an obstacle 10 times in a row, the AUTO-Up Feature With Anti-Pinch Protection auto–up feature unlearns. Lift the window switch to the second detent, release, and the window will go up automatically. WARNING! To stop the window from going all the way up during the There is no anti-pinch protection when the window...
Page 32: Liftgate
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. LIFTGATE The liftgate can be unlocked or locked by the Remote Keyless Entry (RKE) transmitter, the manual lock cylin-...
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 • When all doors are locked (except for RKE transmitter located under the right side of the tail panel, which is located below the liftgate, then pull the liftgate open with liftgate access). Refer to “Entering the Liftgate with the one fluid motion.
Page 34: Occupant Restraint Systems
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Gas props support the liftgate in the open position. Here are some simple steps you can take to minimize the However, because the gas pressure drops with tempera- risk of harm from a deploying air bag: ture, it may be necessary to assist the props when 1.
Page 35: Seat Belt Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 5. You should read the instructions provided with your WARNING! child restraint to make sure that you are using it • Never place a rear-facing child restraint in front of properly. an air bag. A deploying Passenger Advanced Front 6.
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the After the sequence completes, the Seat Belt Reminder inside of the vehicle. Everyone in a motor vehicle should Light remains illuminated until the respective seat belts be belted at all times.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: If BeltAlert has been deactivated, the Seat Belt WARNING! Reminder Light will continue to illuminate while the • Relying on the air bags alone could lead to more driver’s or outboard front passenger’s (if equipped with BeltAlert) seat belt remains unbuckled.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A shoulder belt placed behind you will not protect properly. In a sudden stop, you could move too far you from injury during a collision.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of the front 3. When the seat belt is long enough to fit, insert the latch seat, and next to your arm in the rear seat (for vehicles plate into the buckle until you hear a “click.”...
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 plate and pull on the lap belt. A snug seat belt reduces 6. To release the seat belt, push the red button on the the risk of sliding under the seat belt in a collision. buckle.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Continue to slide the latch plate up until it clears the WARNING! folded webbing and the seat belt is no longer twisted. • ONLY use a Seat Belt Extender if it is physically Seat Belt Extender required in order to properly fit the original seat If a seat belt is not long enough to fit properly, even when...
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Pregnant women should wear the lap part of the seat belt The pretensioners are triggered by the Occupant Re- across the thighs and as snug across the hips as possible. straint Controller (ORC). Like the air bags, the preten- Keep the seat belt low so that it does not come across the sioners are single use items.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt” in the “Child Restraints” section of this manual If the passenger seating position is equipped with an for additional information. The table below defines the ALR and is being used for normal usage: type of feature for each seating position.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 feature. Children 12 years old and under should always 3. Allow the seat belt to retract. As the seat belt retracts, be properly restrained in a vehicle with a rear seat. you will hear a clicking sound. This indicates the seat belt is now in the Automatic Locking Mode WARNING! How To Disengage The Automatic Locking Mode...
Page 46: Supplemental Restraint System (Srs)
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Steering Wheel and Column WARNING! (Continued) • Instrument Panel • Failure to replace the seat belt assembly could increase the risk of injury in collisions. • Knee Impact Bolsters • Do not use the Automatic Locking Mode to restrain •...
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Advanced Front Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt systems. The driver’s Advanced Front Air Bag is mounted in the center of the steering wheel.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), • Being too close to the steering wheel or instrument which may receive information from the front impact sensors or other system components.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Advanced Air Bag Features WARNING! This vehicle has an Occupant Classification System • No objects should be placed over or near the air (“OCS”) in the right front passenger seat. The OCS is bag on the instrument panel or steering wheel, designed to deactivate the front Passenger Advanced because any such objects could cause harm if the...
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 way as the air bags inflate to their full size. The Advanced WARNING! Front Air Bags fully inflate in less time than it takes to • Never place a rear-facing child restraint in front of blink your eyes.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Passenger Air Bag Disabled (PAD) Indicator Light – an Bladder amber light located in the center of the instrument The Bladder is located beneath the passenger seat cush- panel ion foam. The Bladder sends signals to the OCM for •...
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 The Passenger Advanced Front Air Bag may be deacti- vated if the OCS estimates that: • The front passenger seat is unoccupied or has very light objects on it • The front passenger seat is occupied by a rear-facing child restraint •...
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Passenger Air Bag Disable (PAD) System Passenger Seat Passenger Passenger Air Occupant Advanced Air Bag Status Passenger Seat Passenger Passenger Air Status Bag Disabled Occupant Advanced Air Bag Status Indicator Light Status Bag Disabled (“PAD”) Status Indicator Light...
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Advanced Front Air Bag will not inflate even though the Passenger Advanced Front Air Bag will not inflate even Passenger Air Bag Disable (PAD) System Indicator Light though the PAD Indicator Light is not illuminated. is NOT illuminated.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE can occur if the child restraint is lighter than the lightest 2. Remove any extra materials from the passenger seat, weight necessary to illuminate the PAD Indicator Light. such as cushions, pads, seat covers, seat massagers, NEVER assume the Passenger Advanced Front Air Bag is blankets, extra clothing, etc.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Lighter Weight Passengers (Including Small WARNING! Adults) • If the PAD Indicator Light remains illuminated for When a lighter weight passenger, including a small adult, an adult passenger, have an authorized dealer ser- occupies the passenger seat, the Passenger Advanced vice the air bag system immediately.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE PAD Indicator Light is illuminated with the words “PAS- Do Not Decrease The Passenger’s Total Seated SENGER AIR BAG OFF” when an adult is in the front Weight On The Passenger Seat passenger seat, the front passenger must reposition his/ The front passenger’s seated weight must be properly her body in the seat until the PAD Indicator Light goes...
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 • The front passenger leans forward, sideways, or turns passenger’s increased seated weight, which may result in to face the rear of the vehicle activation of the Passenger Advanced Front Air Bag in a collision and serious injury or death may result.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Accessories that may increase the seated weight on the front passenger seat are attached to the front passenger seat • Anything that may increase the front passenger’s seated weight Not Seated Properly Not Seated Properly...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Not Seated Properly Not Seated Properly WARNING! Placing an object on the floor under the front pas- senger seat may prevent the OCS from working properly, which may result in serious injury or death (Continued)
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! in a collision. Do not place any objects on the floor • Ignoring the Air Bag Warning Light in your instru- under the front passenger seat. ment panel could mean you won’t have the air bags to protect you in a collision.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • At no time should any supplemental restraint system The passenger seat assembly contains critical OCS com- ponents that may affect Passenger Advanced Front Air (SRS) component or SRS related component or fastener Bag inflation.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Door-Integrated Side Air Bags WARNING! (Continued) This vehicle is equipped with Supplemental Door- and/or Canadian Motor Vehicle Safety Standards Integrated Side Air Bag Inflatable Curtains (SABICs). (CMVSS). SABICs may help reduce the risk of head injury to front Knee Impact Bolsters seat outboard occupants in certain side impacts.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 inflate with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the SABICs inflate. Children are at an even greater risk of injury from a deploying air bag. SABICs are designed to activate in certain side impacts.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SABICs will not deploy in all side collisions, including their backs against the seats. Children must be properly some collisions at certain angles, or some side collisions restrained in a child restraint or booster seat that is that do not impact the area of the passenger compart- appropriate for the size of the child.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 NOTE: Front and/or side air bags will not deploy in all WARNING! (Continued) collisions. This does not mean something is wrong with • Being too close to the SABICs during deployment the air bag system. could cause you to be severely injured or killed.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE skin, eyes, nose, or throat. If you have skin or eye NOTE: irritation, rinse the area with cool water. For nose or • Air bag covers may not be obvious in the interior trim, throat irritation, move to fresh air.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Turn on the interior lights, which remain on as long as or ON/RUN position. If the ignition is in the OFF the battery has power or until the ignition is placed in position or in the ACC position, the air bag system is not the “OFF”...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE diagnostics also record the nature of the malfunction. WARNING! While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized Ignoring the Air Bag Warning Light in your instru- dealer service the air bag system immediately.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or may • Modifications to any part of the air bag system not function properly if modifications are made.
Page 72: Child Restraints
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE bag deployment or hitting a road obstacle, data that will NOTE: EDR data are recorded by your vehicle only if a assist in understanding how a vehicle’s systems per- non-trivial crash situation occurs; no data are recorded by formed.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Every state in the United States, and every Canadian There are different sizes and types of restraints for province, requires that small children ride in proper children from newborn size to the child almost large restraint systems.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convertible younger and who have not reached the Child Restraint, facing rearward in the height or weight limits of their child...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for WARNING! as long as possible, up to the highest weight or height • Improper installation can lead to failure of an allowed by the child seat. infant or child restraint.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 2. Do the child’s knees bend comfortably over the front WARNING! (Continued) of the vehicle seat – while they are still sitting all the • When your child restraint is not in use, secure it in way back? the vehicle with the seat belt or LATCH anchor- 3.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE into the retractor. Refer to the “Automatic Locking WARNING! Mode” description under “Occupant Restraints” for ad- ditional information on ALR. Never allow a child to put the shoulder belt under an arm or behind their back. In a crash, the shoulder belt Lap/Shoulder Belt Systems For Installing Child will not protect a child properly, which may result in Restraints In This Vehicle...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a child restraint, up to the recommended forward facing child restraint?
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. Try to pull the webbing out of the retractor. If it is Installing Child Restraints Using The Top Tether locked, you should not be able to pull out any web- Anchorage bing.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 There is a tether strap anchor located behind the child tether access cover behind the passen- ger seat. To attach a child restraint tether strap to the anchor: 1. Move the seat forward. 2.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Attach the tether hook to the anchor loop. Child Seat Tether Anchor NOTE: While the child tether is in use, keep the access Tether Hook cover in a safe place so that it can be replaced after use of 6.
Page 83: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 8. Remove slack from the tether strap according to the BREAK-IN RECOMMENDATIONS child restraint manufacturer’s directions. A long break-in period is not required for the drivetrain (engine, transmission, and rear axle) in your new vehicle. WARNING! Following these few simple guidelines is all that is necessary for a good break-in.
Page 84: Safety Tips
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Avoid excessive idling. WARNING! (Continued) • Check the engine oil level at every fuel fill. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people NOTE: A new engine will consume some oil during the riding in these areas are more likely to be seriously first few thousand miles (kilometers) of operation.
Page 85: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Whenever a change is noticed in the sound of the exhaust WARNING! (Continued) system, when exhaust fumes can be detected inside the eventually poison you. To avoid breathing (CO), vehicle, or when the underside or rear of the vehicle is follow these safety tips: damaged, have a competent mechanic inspect the com- •...
Page 86: Periodic Safety Checks You Should Make Outside The Vehicle
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front seat belt assemblies must be replaced after a Floor Mat Safety Information collision. Seat belt assemblies must be replaced after a Always use floor mats designed to fit the foot well of collision if they have been damaged (i.e., bent retractor, your vehicle.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Lights Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for proper closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks.
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......90 LIGHTS ......102 ▫...
Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ High/Low Beam Switch ....106 ELECTRONIC SPEED CONTROL ...114 ▫...
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 ▫ Canadian/Gate Operator Programming ..125 CUPHOLDERS — IF EQUIPPED ...134 ▫ Using HomeLink® ....127 STORAGE .
Page 92: Mirrors
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. This feature will be defaulted on, and only be disabled when the vehicle is moving in reverse. Automatic Dimming Mirror If Equipped, the rearview mirror contains an ASSIST and a 9-1-1 button.
Page 93: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 NOTE: In case the 9-1-1 Call button is pushed in error, CAUTION! there will be a 10 second delay before the 9-1-1 Call system initiates a call to a 9-1-1 operator. To cancel the To avoid damage to the mirror during cleaning, never 9-1-1 Call connection, push the 9-1-1 Call button on the spray any cleaning solution directly onto the mirror.
Page 94: Power Mirrors
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 95: Vanity Mirror
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move. Vanity Mirror A vanity mirror is on the passenger side sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward.
Page 96: Seats
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Manual Seats Seats are a part of the Occupant Restraint System of the Forward And Rearward Adjustment vehicle. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 position. Then, using body pressure, move forward and The seat height adjustment lever is located on the out- rearward on the seat to be sure that the seat adjusters board side of the seat. Pull upward on the lever to raise have latched.
Page 98 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment seat to its full upright position, lean forward, pull the recliner lever upward and hold it until the seat returns to its full upright position. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
Page 99: Power Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Power Seats Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining The Seatback Forward Or Rearward Release the switch when the desired position has been reached. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
Page 101: Non-Adjustable Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 CAUTION! WARNING! Do not place any article under a power seat or Be certain that the seatback is locked securely into impede its ability to move as it may cause damage to position. Otherwise, the seat will not provide the the seat controls.
Page 102: To Open And Close The Hood
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Pull the hood release lever rearward to release the hood latches. 1. Reach into the back side area of the drivers front fender to gain access to the hood release lever. Hood Release Lever Hood Release Lever Location...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 3. Lift the hood upward to the full forward position. CAUTION! • Do not leave the hood open in areas where strong gust of wind are likely. Such a place might be by the side of the road where large trucks pass by.
Page 104: Lights
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Page 105: Automatic Headlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Automatic Headlights is set to ON. In addition, the headlights will turn off when the wipers are turned off if they were turned on by This system automatically turns the headlights on or off this feature.
Page 106: Daytime Running Lights
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights or parking lights on, or place Daytime Running Lights the ignition in ACC or RUN, the system will cancel the The LED Daytime Running Lights will come on when- delay.
Page 107: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Multifunction Lever Turn Signals The multifunction lever controls the operation of the turn Move the multifunction lever up or down and the arrows signals, headlight beam selection and passing lights. The on each side of the instrument cluster flash to show multifunction lever is located on the left side of the proper operation of the front and rear turn signal lights.
Page 108: Flash-To-Pass
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High/Low Beam Switch Interior Lights Push the multifunction lever away from you to switch The interior lights come on when a door is opened. the headlights to high beam. Pull the multifunction lever To protect the battery, the interior lights will turn off toward you to switch the headlights back to low beam.
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Dimmer Controls Interior Light Control The dimmer control is part of the headlight switch and is Rotate the dimmer control completely upward to the located on the left side of the instrument panel. Rotating second detent to turn on the interior lights.
Page 110: Windshield Wipers And Washers
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Defeat (OFF) Rotate the dimmer control to the extreme bottom OFF position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the instrument panel dimmer control upward to the first detent.
Page 111: Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 are four delay settings, which allow you to regulate the CAUTION! (Continued) wipe interval from a minimum of one cycle every second • In cold weather, always turn off the wiper switch to a maximum of approximately 36 seconds between and allow the wipers to return to the “Park”...
Page 112: Windshield Washers
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE located on the end of the multifunction lever, inward to pushed while in the off position, the wiper will turn on the first detent and release. The wipers will cycle one and cycle approximately three times after the wash knob time and automatically shut off.
Page 113: Headlights On With Wipers (Available With Automatic Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Headlights On With Wipers (Available With you and then move the steering wheel upward or down- Automatic Headlights Only) ward as desired. When the column is in the desired position, push the release lever forward to lock the When this feature is active, the headlights will turn on column firmly in place.
Page 114: Adjustable Pedals
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 • The pedals cannot be adjusted when the vehicle is in CAUTION! REVERSE or when the Electronic Speed Control Sys- tem is on. The following messages will be displayed in Do not place any article under the adjustable pedals the Driver Information Display (DID) if the pedals are or impede its ability to move as it may cause damage attempted to be adjusted when the system is locked...
Page 116: Adjustable Foot Rest
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Foot Rest To adjust the pedal: This feature allows the driver to adjust the foot rest 1. Adjust the seat and steering column to a comfortable forward or backward and to rotate it upward or down- position.
Page 117: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple speed control buttons are pushed at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 118: To Set A Desired Speed
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the set speed or normal brake pressure while slowing the WARNING! vehicle will deactivate the Electronic Speed Control with- out erasing the set speed memory. Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally Pushing the ON/OFF button or turning the ignition set the system or cause it to go faster than you want.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 The speed increment shown is dependent on the selected To Decrease Speed speed unit of U.S. (mph) or Metric (km/h): When the Electronic Speed Control is set, you can de- crease speed by pushing the SET (-) button. U.S.
Page 120: To Accelerate For Passing
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Metric Speed (km/h) PARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED • Pushing the SET (-) button once will result in a 1 km/h Your vehicle may be equipped with the ParkView® Rear decrease in set speed.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 displayed for up to 10 seconds when the vehicle is shifted When enabled, fixed guide lines are overlaid on the out of REVERSE unless the forward vehicle speed ex- image to illustrate the width of the vehicle. ceeds 8 mph (13 km/h), the transmission is shifted into Different colored zones indicate the distance to the rear of PARK or the vehicle’s ignition is placed to the OFF...
Page 122: Garage Door Opener - If Equipped
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! (Continued) • To avoid vehicle damage, the vehicle must be Drivers must be careful when backing up even when driven slowly when using ParkView® to be able to using the ParkView® Rear Back Up Camera. Always stop in time when an obstacle is seen.
Page 123: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 The HomeLink® buttons, located on the sunvisor, desig- Before You Begin Programming HomeLink® nate the three different HomeLink® channels. The Ensure your vehicle is parked outside of the garage HomeLink® indicator is located above the center button. before you begin programming.
Page 124: Programming A Rolling Code
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for information or assistance.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 Firmly push and release the “LEARN” or “TRAIN- cm) away from the HomeLink® button you wish to ING” button. On some garage door openers/devices program while keeping the HomeLink®...
Page 126: Programming A Non-Rolling Code
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink® Button 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 (Rolling Code) cm) away from the HomeLink® button you would like to program while keeping the HomeLink® indicator To reprogram a channel that has been previously trained, light in view.
Page 127: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • To program the remaining two HomeLink® buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 NOTE: cm) away from the HomeLink® button you wish to • If the indicator light stays on constantly, program- program while keeping the HomeLink® indicator ming is complete and the garage door/device should light in view.
Page 129: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 2. Push and hold the desired HomeLink® button until To do this, push and hold the two outside buttons for 20 the indicator light begins to flash after 20 seconds. Do seconds until the red indicator flashes. Note that all not release the button.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you have any problems, or require assistance, please WARNING! (Continued) call toll-free 1-800-355-3515 or, on the Internet at • Your motorized door or gate will open and close HomeLink.com for information or assistance. while you are programming the universal trans- ceiver.
Page 131: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 • The term IC before the certification/registration num- General Information ber only signifies that Industry Canada technical speci- This device complies with FCC rules Part 15 and Industry fications were met. Canada RSS-210. Operation is subject to the following two conditions: ELECTRICAL POWER OUTLETS 1.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Power Outlet Center Console Outlet The second power outlet is located between the seat NOTE: Do not exceed the maximum power of 160 Watts backs above the cup holders. This power outlet is con- (13 Amps) at 12 Volts.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 134: Auxiliary Jumper Harness
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Auxiliary Jumper Harness The SRT Viper is equipped with an auxiliary power jumper, allowing an electronic device to be directly connected to the vehicle without having to use the console power outlets. Power to the device will be controlled by the ignition switch.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Auxiliary Port Jumper Mirror Cover Installation Re-install the mirror cover and be sure to not pinch the wires that go into the electronic device.
Page 136: Cupholders - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS — IF EQUIPPED STORAGE There are two cupholders located in the rear of the center Glove Compartment console. An electronic glove compartment is located on the pas- senger side of the instrument panel. Push in the button to open the glove compartment.
Page 137: Console Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Console Features Console Cubby Bin — If Equipped An open storage area, or cubby bin, is located in the center console rearward of the shift lever. Opened Glove Compartment NOTE: The glove compartment will lock with the door locks unless the key fob is detected inside the vehicle.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Net Storage — If Equipped Storage Bin — If Equipped There is a cargo net storage area located between the There is a storage bin located between the driver and driver and passengers seat. passengers seat.
Page 139: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Door Storage WARNING! The door panels contain storage areas located in the Do not operate this vehicle with a console compart- lower center area of the door panel. ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 140: Rear Window Features
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to the heating elements: The rear window defroster button is located on • Use care when washing the inside of the rear the climate control panel.
Page 141: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Driver Information Display (DID) Selectable INSTRUMENT PANEL FEATURES ..142 Menu Items......165 INSTRUMENT CLUSTER .
Page 142 140 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Control Setting Suggestions for Various Weather STEERING WHEEL AUDIO CONTROLS ..194 Conditions ......204 ▫...
Page 143 UNDERSTANDING YOUR INSTRUMENT PANEL 141 ▫ Register (8.4AN) ..... .213 ▫ Yelp® (8.4AN) ......215 ▫...
Page 144: Instrument Panel Features
142 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 6 — Passenger Air Bag 11 — Climate Controls 2 — Sound System Speaker 7 — Glove Compartment 12 — Dimmer Controls 3 — Instrument Cluster 8 — Uconnect® System 13 —...
Page 145: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 143 INSTRUMENT CLUSTER...
Page 146: Instrument Cluster Descriptions
144 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS check or when driving, if the driver’s seat belt remains unbuckled, the Seat Belt Reminder Light will illuminate, 1. Speedometer and the chime will sound. Refer to “Occupant Restraints” Indicates vehicle speed. in “Things To Know Before Starting Your Vehicle”...
Page 147 UNDERSTANDING YOUR INSTRUMENT PANEL 145 NOTE: Leaving the hazard flashers on for extended NOTE: periods will wear down the battery. • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on 5. Electronic Stability Control (ESC) Activation/ momentarily each time the ignition is cycled to Malfunction Indicator Light —...
Page 148 146 UNDERSTANDING YOUR INSTRUMENT PANEL • Main Screen — The inner ring of the display will service, so that you can be sure that it is properly illuminate in gray under normal conditions, yellow reset, or that the door jamb sticker is accurate if the for non critical warning, red for critical warnings and odometer must be reset at zero white for on demand information.
Page 149 UNDERSTANDING YOUR INSTRUMENT PANEL 147 indicate that the parking brake is applied, that the brake The light will remain on until the cause is corrected. fluid level is low, or that there is a problem with the NOTE: The light may flash momentarily during sharp anti-lock brake system reservoir.
Page 150 148 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light will turn on along with the ABS 9. Oil Pressure Gauge Warning Light Light. Immediate repair to the ABS system is required. Oil Pressure Primary Gauge and Secondary gauge Operation of the Brake Warning Light can be checked by Warning The Oil pressure Primary and Secondary gage turning the ignition switch from the OFF position to the indicate the oil current pressure.
Page 151 UNDERSTANDING YOUR INSTRUMENT PANEL 149 11. High Beam Indicator has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should This indicator shows that the high beam head- determine the proper tire inflation pressure for those lights are on.
Page 152 150 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle to ensure that the replace- not reached the level to trigger illumination of the TPMS ment or alternate tires and wheels allow the TPMS to low tire pressure telltale.
Page 153 UNDERSTANDING YOUR INSTRUMENT PANEL 151 14. Malfunction Indicator Light (MIL) CAUTION! (Continued) The Malfunction Indicator Light (MIL) is part of control system. It also could affect fuel economy and an onboard diagnostic system, called OBD, that driveability. If the MIL is flashing, severe catalytic monitors engine control systems.
Page 154 152 UNDERSTANDING YOUR INSTRUMENT PANEL 15. Electronic Speed Control Indicator Lights 17. DID Amber Telltale Lights • Electronic Speed Control ON Indicator When the appropriate conditions exist, the following DID This light will turn on when the electronic Amber Telltale Lights will display: speed control is ON.
Page 155 UNDERSTANDING YOUR INSTRUMENT PANEL 153 • Charging System 18. DID Red Telltale Lights This telltale shows the status of the electrical When the appropriate conditions exist, the following DID charging system. If the telltale stays on or Red Telltale Lights will display: comes on while driving, turn off some of the vehicles •...
Page 156 154 UNDERSTANDING YOUR INSTRUMENT PANEL Do not operate the vehicle until the cause is cor- immediate service is required. You may experience rected. This light does not show how much oil is in reduced performance, an elevated/rough idle, or the engine. The engine oil level must be checked engine stall and your vehicle may require towing.
Page 157 UNDERSTANDING YOUR INSTRUMENT PANEL 155 19. Anti-Lock Brake (ABS) Light 20. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park This light monitors the Anti-Lock Brake System lights or headlights are turned on. (ABS). The light will turn on when the ignition is cycled to the ON/RUN position and may stay on for as long as four seconds.
Page 158: Driver Information Display (Did)
156 UNDERSTANDING YOUR INSTRUMENT PANEL DRIVER INFORMATION DISPLAY (DID) This system allows the driver to select a variety of useful information by pushing the switches mounted on the steering wheel. The DID consists of the following: • Tachometer • MPH/KMH •...
Page 159 UNDERSTANDING YOUR INSTRUMENT PANEL 157 • UP Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the UP arrow button to scroll wheel: upward through the main menu and sub- menus (Fuel Economy, Trip A, Trip B, Audio, Stored Messages, Screen Set Up).
Page 160: Did Display
158 UNDERSTANDING YOUR INSTRUMENT PANEL • LEFT Arrow Button DID Display Push and release the LEFT arrow button to return to the main menu from an info screen or submenu item. NOTE: Pushing the LEFT arrow button will override the DID “pop up”...
Page 161 UNDERSTANDING YOUR INSTRUMENT PANEL 159 The DID display is located in the center portion of the 6. Suspension Status — The suspension status icon will instrument cluster and consists of the following sections: illuminate in this area. Refer to “Starting And Operat- ing”...
Page 162 160 UNDERSTANDING YOUR INSTRUMENT PANEL The main display area will normally display the main NOTE: Pushing the LEFT arrow button will override the menu or the screens of a selected feature of the main DID “pop up” messages and return you to the menu menu.
Page 163: Driver Information Display (Did) Messages
UNDERSTANDING YOUR INSTRUMENT PANEL 161 • Cruise Ready Driver Information Display (DID) Messages • Front Seat Belts Unbuckled • Cruise Set To XXX MPH • Driver Seat Belt Unbuckled • Tire Pressure Screen With Low Tire Pressure Warnings • Passenger Seat Belt Unbuckled •...
Page 164: Did Yellow Telltales
162 UNDERSTANDING YOUR INSTRUMENT PANEL • Turn Signal On DID Yellow Telltales • Service Air Bag System This area will show amber caution telltales. These tell- tales include: • Service Air Bag Warning Light • Low Fuel Telltale • Driver Seat Belt Unbuckled When the fuel level reaches approximately 3.0 gal •...
Page 165: Did Red Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 163 DID Red Telltales The oil level should be maintained in the SAFE zone at all times. Oil level below the SAFE zone can cause the This area will show red telltales. These telltales include: oil pressure warning lamp to illuminate under some •...
Page 166 164 UNDERSTANDING YOUR INSTRUMENT PANEL • Electronic Throttle Control (ETC) Light • Engine Temperature Warning Light This light informs you of a problem with the This light warns of an overheated engine condi- Electronic Throttle Control (ETC) system. The tion. As temperatures rise and the gauge ap- light will come on when the ignition is first proaches H, this indicator will illuminate, and a single cycled ON and remain on briefly as a bulb...
Page 167: Did Green Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 165 DID Green Telltales Tachometer • Electronic Speed Control SET Push and release the UP or DOWN arrow This telltale will illuminate green when the button until the Tachometer icon is highlighted electronic speed control is SET. Refer to “Elec- in the DID.
Page 168 166 UNDERSTANDING YOUR INSTRUMENT PANEL • If one or more tires have low pressure, the tire pressure Vehicle Info (Customer Information Features) values in each corner of the ICON with the pressure value of the low tire displayed in a different color than Push and release the UP or DOWN arrow the other tire pressure value.
Page 169 UNDERSTANDING YOUR INSTRUMENT PANEL 167 Oil Temperature Current Power Push and release the UP or DOWN arrow button until Push and release the UP or DOWN arrow button until “Oil Temperature” is highlighted in the DID. Push and “Current Power” is highlighted in the DID. Push and release the RIGHT arrow button, and the oil temperature release the RIGHT arrow button, and the current power will be displayed.
Page 170 168 UNDERSTANDING YOUR INSTRUMENT PANEL SRT Performance Push and release the UP or DOWN arrow button until the SRT icon is highlighted in the DID. Push and release the RIGHT arrow button, and 0–60 MPH Duration will be displayed. Push and release the LEFT and RIGHT arrow button to scroll through the following information sub- menus: WARNING!
Page 171 UNDERSTANDING YOUR INSTRUMENT PANEL 169 1/8 Mile Elapsed Time Range To Empty (RTE) Push and release the LEFT and RIGHT arrow button Average Fuel Economy/Miles Per Gallon (MPG Bar- until the last 1/8 Mile Top Speed & Duration information graph) is displayed.
Page 172 170 UNDERSTANDING YOUR INSTRUMENT PANEL Trip B — If Equipped Audio Push and release Up or Down arrow button Push and release the UP or DOWN arrow until the Trip B icon is highlighted in the DID. button until the Audio display icon is high- The Trip B information will display the lighted in the DID.
Page 173 UNDERSTANDING YOUR INSTRUMENT PANEL 171 • Battery Screen Setup Driver Selectable Items • Coolant Temperature Upper Left • None Upper Right • Compass • None • Temperature • Compass • Range To Empty (RTE) • Temperature • Average Fuel • Range To Empty (RTE) •...
Page 174 172 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Temperature Tach. Peak Hold • Battery When enabled, the Tach. Peak Hold function marks the peak Revolutions Per Minute (RPM) on the tachometer • Coolant Temperature gauge for 3 seconds when the RPM is above 4000. Using •...
Page 175 UNDERSTANDING YOUR INSTRUMENT PANEL 173 Diagnostic Codes Push and release the UP or DOWN arrow button until the Diagnostic Code icon is high- lighted in the DID. Push and release the RIGHT arrow button to display any present diagnostic trouble codes along with a brief definition. Vehicle Hibernation Push and release the UP or DOWN arrow button until the Hibernation icon is highlighted...
Page 176: Uconnect® Settings
174 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® SETTINGS The Uconnect® system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allow you to access and change the customer programmable features. NOTE: Many features can vary by vehicle Uconnect®...
Page 177: Buttons On The Faceplate
UNDERSTANDING YOUR INSTRUMENT PANEL 175 Buttons On the Faceplate system allows you to access programmable features that may be equipped such as Display, Voice, Clock, Safety & Buttons on the faceplate are located below the Uconnect® Driving Assistance, Lights, Doors & Locks, Engine Off system in the center of the instrument panel.
Page 178 176 UNDERSTANDING YOUR INSTRUMENT PANEL Display NOTE: The usage of the Parade Mode feature will cause the radio to activate the “Display Brightness With Head- After pressing the Display button on the touchscreen the lights OFF” control even though the headlights are on. following settings will be available.
Page 179 UNDERSTANDING YOUR INSTRUMENT PANEL 177 and the navigation system (if equipped). Press the Set the Touchscreen Beep button on the touchscreen until a Language button on the touchscreen and then press the check-mark appears next to the setting, showing that desired language button on the touchscreen until a setting has been selected.
Page 180 178 UNDERSTANDING YOUR INSTRUMENT PANEL • Show Command List designated turn within a programmed route. To turn on or enable, press the Navigation Turn-By-Turn In Cluster When in this display, you may choose to Always, With button on the touchscreen, until a check-mark appears Help, or Never display the Teleprompter with possible next to the setting, showing that setting has been se- options while in a voice session.
Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 179 that setting has been selected. Press the back arrow return to the previous menu or press the “X” button on button on the touchscreen to return to the previous the touchscreen to close out of the settings screen. menu, or push the back button on the faceplate.
Page 182 180 UNDERSTANDING YOUR INSTRUMENT PANEL • Time Format time with GPS” button on the touchscreen until a check- mark appears next to the setting, showing that setting has This feature will allow you to select the time format been selected. Press the back arrow button on the touch- display setting.
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 181 • Hill Start Assist — If Equipped Safety & Driving Assistance — If Equipped After pressing the Safety & Driving Assistance button on When this feature is selected, the Hill Start Assist (HSA) the touchscreen the following settings will be available: system is active.
Page 184 182 UNDERSTANDING YOUR INSTRUMENT PANEL arrow button on the touchscreen to return to the previous on the touchscreen, until a check-mark appears next to menu, or push the back button on the faceplate. setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the •...
Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 183 • Auto Unlock On Exit with Lock button on the touchscreen, until a check-mark appears next to setting, showing that setting has been When this feature is selected, all doors will unlock when selected. Press the back arrow button on the touchscreen the vehicle is stopped, the transmission is in the PARK or to return to the previous menu, or push the back button NEUTRAL position and the driver’s door is opened.
Page 186 184 UNDERSTANDING YOUR INSTRUMENT PANEL selected. Press the back arrow button on the touchscreen When All Doors is selected for 1st Press Of Key Fob to return to the previous menu, or push the back button Unlocks, all doors will unlock on the first press of the on the faceplate.
Page 187 UNDERSTANDING YOUR INSTRUMENT PANEL 185 Entry (RKE) transmitter lock or unlock buttons. To make “Engine Off Power Delay” status, press the 0 seconds, 45 your selection, press the “Passive Entry” button on the seconds, 5 minutes or 10 minutes button on the touch- touchscreen, until a check-mark appears next to setting, screen.
Page 188 186 UNDERSTANDING YOUR INSTRUMENT PANEL • Speed Adjusted Volume Audio After pressing the Audio button on the touchscreen the This feature increases or decreases volume relative to following settings will be available. vehicle speed. To change the Speed Adjusted Volume press the “Off,”...
Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 187 • AUX Volume Offset • Paired Audio Sources This feature provides the ability to tune the audio level This feature shows which audio devices are paired to the for portable devices connected through the AUX input. Phone/Bluetooth®...
Page 190 188 UNDERSTANDING YOUR INSTRUMENT PANEL • Subscription Information Restore Settings After pressing the “Restore Settings” button on the New vehicle purchasers or lessees will receive a free touchscreen the following settings will be available: limited time subscription to SiriusXM Satellite Radio with your radio.
Page 191: Srt Performance Pages
UNDERSTANDING YOUR INSTRUMENT PANEL 189 Clear Personal Data System Information After pressing the “Clear Personal Data Settings” button After pressing the “System Information” button on the on the touchscreen the following settings will be avail- touchscreen the following settings will be available: able: •...
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL • Gauges 1 WARNING! • Gauges 2 Measurement of vehicle statistics with the SRT Per- • Engine formance Pages is intended for off-highway or off- road use only and should not be done on any public •...
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 191 • Best The “Tickets” contain the timers listed below: • 0-60 MPH (0-100 km/h) Pressing the “Best” button displays the best recorded run of performance timers, except for braking data. Displays the time it takes for the vehicle to go from 0 to •...
Page 194 192 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The distance measurement will be aborted if the Gauges 1 brake pedal is released before the vehicle comes to a When selected, this screen displays the following values: complete stop. • Oil Temperature • Brake Speed Displays the actual oil temperature.
Page 195: Uconnect® Radios - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 193 • Intake Air Temperature • Torque (ft-lb) Displays the actual intake air temperature. Displays the actual torque. • Oil Pressure • Oil Pressure (psi) Displays the actual oil pressure. Displays the actual oil pressure. • Battery Voltage Options Displays the actual battery voltage.
Page 196: Ipod®/Usb/Mp3 Control - If Equipped
194 UNDERSTANDING YOUR INSTRUMENT PANEL iPod®/USB/MP3 CONTROL — IF EQUIPPED Located at the rear area of the center console, this feature allows an iPod® or external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone®...
Page 197: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 195 The button located in the center of the right hand control will switch modes to Radio or other valid audio source. The left hand control is a rocker type switch with a push-button in the center. The function of the left hand control is different depending on which mode you are in.
Page 198: Radio Operation And Mobile Phones
196 UNDERSTANDING YOUR INSTRUMENT PANEL The Satellite/Navigation antenna is located in the rear General Information liftgate, while the cellular phone antenna is on the This device complies with Part 15 of the FCC rules and windshield behind the interior rearview mirror. RSS 210 of Industry Canada.
Page 199: Automatic Temperature Control (Atc)
UNDERSTANDING YOUR INSTRUMENT PANEL 197 Automatic Temperature Control (ATC) Buttons On The Touchscreen Buttons On The Faceplate Buttons on the touchscreen are accessible on the Uconnect® system touchscreen. The buttons on the faceplate are located below the Uconnect® touchscreen. Uconnect® Temperature Controls Automatic Climate Controls...
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL Button Descriptions (Applies To Both Buttons On The 4. AUTO Temperature Control Faceplate And Buttons On The Touchscreen) Controls airflow temperature, distribution, volume, and 1. MAX A/C Button the amount of air recirculation automatically. Press and release to select.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 6. Rear Defrost Button CAUTION! (Continued) Press and release this button to turn on the rear window • Do not use scrapers, sharp instruments, or abrasive defroster and the heated outside mirrors (if equipped). window cleaners on the interior surface of the An indicator will illuminate when the rear window window.
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL Button On The Touchscreen airflow direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount Use the small blower icon to reduce the blower setting of airflow from these outlets. and the large blower icon to increase the blower setting.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 201 • Mix Mode 2. Next, adjust the temperature you would like the Air comes from the floor, defrost and side system to maintain by adjusting the driver and pas- window demist outlets. This mode works best senger temperature control buttons.
Page 204: Summer Operation
202 UNDERSTANDING YOUR INSTRUMENT PANEL feature. Refer to the “Customer Programmable Fea- NOTE: In cold weather, use of Recirculation mode may tures — Uconnect® System Settings” in this section of lead to excessive window fogging. The Recirculation the manual. mode is not allowed in Defrost mode to improve window clearing operation.
Page 205: Vacation/Storage
UNDERSTANDING YOUR INSTRUMENT PANEL 203 coolant selection. Use of the air Recirculation mode NOTE: Automatic Temperature Controls (ATC) will au- during Winter months is not recommended because it tomatically adjust the climate control settings to reduce may cause window fogging. or eliminate window fogging on the front windshield.
Page 206: Control Setting Suggestions For Various Weather Conditions
204 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
Page 207: Uconnect® Voice Recognition Quick Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 205 Uconnect® VOICE RECOGNITION QUICK TIPS Introducing Uconnect® Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 8.4AN system. Uconnect®...
Page 208: Get Started
206 UNDERSTANDING YOUR INSTRUMENT PANEL Get Started Two buttons are all you need to control your Uconnect® system with your voice. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing in- Basic Voice Commands structions.
Page 209: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 207 • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.” The system will provide you with a list of commands.
Page 210: Media
208 UNDERSTANDING YOUR INSTRUMENT PANEL Media TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Uconnect® offers connections via USB, SD, Bluetooth® Command must match exactly how the artist, album, and auxiliary ports (If Equipped).
Page 211: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Phone TIP: When providing a Voice Command, push the Phone button and say “Call,” then pronounce the name Making and answering hands-free phone calls is easy exactly as it appears in your phone book. When a with Uconnect®.
Page 212: Voice Text Reply
210 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Text Reply PRE-DEFINED VOICE TEXT REPLY RESPONSES Uconnect® will announce incoming text messages. Push I’ll call you I need See you in the Phone button and say Listen. (Must have com- later. directions. <number> of patible mobile phone paired to Uconnect®...
Page 213: Navigation (8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Push the VR button . After the beep, say one of the Navigation (8.4AN) following commands: The Uconnect® navigation feature helps you save time • Set temperature to 70 degrees and become more productive when you know exactly how to get to where you want to go.
Page 214: Uconnect® Access* (8.4An)
212 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: To start a POI search, push the VR button section of this guide. To register with Uconnect® Access, After the beep, say: “ Find nearest coffee shop.” press the SRT & Apps button on the 8.4-inch touchscreen to get started.
Page 215: Register (8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 213 Roadside Assistance Call 5. Click on the link inside the email within 72 hours and complete the easy online registration process to create Wi-Fi Hotspot*** a personal Mopar® Owner Connect account linked to **If vehicle is equipped. your vehicle.
Page 216: Mobile App (8.4An)
214 UNDERSTANDING YOUR INSTRUMENT PANEL Mobile App (8.4AN) Download the Uconnect® Access App to a compatible Apple® or Android® mobile devices. All you need to do Securely link your mobile device to your vehicle with the Uconnect® Access App. Once you have downloaded the App, you may start your vehicle or lock it from virtually 1.
Page 217: Yelp® (8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 215 2. Listen to the prompt. After the beep, dictate the Yelp® (8.4AN) message you would like to send. Wait for Uconnect® Once registered with Uconnect® Access, you can use to process your message. your voice to search for the most popular places or things around you.
Page 218: Siriusxm Travel Link™ (8.4An)
216 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Once you perform a search, you can reorganize the SiriusXM Travel Link™ (8.4AN) results by selecting either the Best Match, Rating or Need to find a gas station, view local movie listings, Distance tab on the top of the touchscreen display. check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™...
Page 219: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 217 and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo, Yelp burst and related marks are registered trademarks of Yelp. Uconnect® System Support: • U.S. residents call 1-877-855-8400 or visit DriveUconnect.com • Canadian residents call 1-800-465-2001 (English) or 1-800-387-9983 (French) or visit DriveUconnect.ca Mon.
Page 221 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....222 DRIVING ON SLIPPERY SURFACES ..232 ▫ Normal Starting..... . .222 ▫...
Page 222 220 STARTING AND OPERATING ▫ Brake Pad Break-In ....239 ▫ Tire Pressures For High Speed Operation ..261 ▫ Radial Ply Tires ..... .261 ELECTRONIC BRAKE CONTROL SYSTEM .
Page 223 STARTING AND OPERATING 221 FUEL REQUIREMENTS ....277 ADDING FUEL ......282 ▫...
Page 224: Starting Procedures
222 STARTING AND OPERATING STARTING PROCEDURES CAUTION! Before starting your vehicle, adjust your seat, adjust the Long periods of engine idling, especially at higher inside and outside mirrors, fasten your seat belt, and if than normal engine idle speeds, can cause excessive present, instruct any other occupant to buckle their seat exhaust temperatures, which can damage your ve- belt.
Page 225 STARTING AND OPERATING 223 NOTE: NOTE: The engine will not start unless the clutch pedal is pressed to the floor. • You must disarm the security system in order to start 3. Place the shift lever in NEUTRAL. the engine. Refer to “Security Alarm System” in 4.
Page 226: If Engine Fails To Start
224 STARTING AND OPERATING If Engine Fails To Start WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it CAUTION! started. Unburned fuel could enter the catalytic To prevent damage to the starter, do not crank the converter and once the engine has started, ignite engine for more than 15 seconds at a time.
Page 227: After Starting
STARTING AND OPERATING 225 all the way to the floor. Release the accelerator pedal and floor during each shift. As you release the clutch pedal, the ENGINE START button once the engine is running lightly press the accelerator pedal. smoothly. CAUTION! If the engine shows no sign of starting after two 15 second periods of cranking with the accelerator pedal...
Page 228: Shifting
226 STARTING AND OPERATING Ensure the transmission is in first gear when moving spring helps you know which gear you are in when you forward from a standing position. are shifting. Be careful when shifting from first to second or downshifting from sixth to fifth. CAUTION! The spring will try to pull the shift lever toward third and fourth gear.
Page 229: Recommended Shift Speeds
STARTING AND OPERATING 227 NOTE: (clutch pedal released), but it may also be heard when driving. The noise may also be more noticeable when • Your vehicle is equipped with a transmission reverse the transmission is warm. This noise is normal and is inhibitor system.
Page 230: Skip Shift Indicator Light
228 STARTING AND OPERATING cruise conditions (relatively steady speeds) will result in coolant is higher than 107°F (42°C), and vehicle speed is increased fuel economy, and may be used as indicated. greater than 16 mph (26 km/h) but less than 18 mph (29 km/h), and engine speed is less than 1,550 RPM, and MANUAL TRANSMISSION the transmission is in first gear, and the accelerator is at...
Page 231: Street/Race Mode - If Equipped
STARTING AND OPERATING 229 the system will automatically shift the suspension damp- CAUTION! ers to the firmer Race damping setting during some hard acceleration and braking situations. There are two modes If you skip more than one gear while downshifting of operation: or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch.
Page 232: Launch Mode
230 STARTING AND OPERATING NOTE: LAUNCH MODE • With the ignition in the ON/RUN position, the sus- This system maximizes acceleration traction for straight line racing. pension damping system will be in the last mode the system was in when the vehicle was turned off. The 1.
Page 233 STARTING AND OPERATING 231 NOTE: If the cluster launch DID message indicates all conditions are correct for launch and the throttle is pressed to the floor quickly (within approximately 1/2 second) the system will hold the engine speed to a preset speed (below the engine rev limiter speed).
Page 234: Driving On Slippery Surfaces
232 STARTING AND OPERATING • Launch mode should not be used within the first 500 DRIVING ON SLIPPERY SURFACES miles of engine break-in. Acceleration WARNING! WARNING! Launch Mode is intended for off-highway or off-road Rapid acceleration on slippery surfaces is dangerous. use only and should not be used on any public You could lose control of the vehicle and possibly roadways.
Page 235: Driving Through Water
STARTING AND OPERATING 233 1. Slow down during rainstorms or when roads are DRIVING THROUGH WATER slushy. Driving through water more than a few inches/ centimeters deep will require extra caution to ensure 2. Slow down if road has standing water or puddles. safety and prevent damage to your vehicle.
Page 236: Shallow Standing Water
234 STARTING AND OPERATING Shallow Standing Water CAUTION! Although your vehicle is capable of driving through • Always check the depth of the standing water shallow standing water, consider the following Cautions before driving through it. Never drive through and Warnings before doing so. standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
Page 237: Power Steering
STARTING AND OPERATING 235 POWER STEERING CAUTION! (Continued) The standard power steering system will give you good • Driving through standing water may cause damage vehicle response and increased ease of maneuverability to your vehicle’s drivetrain components. Always in tight spaces. The system will provide mechanical inspect your vehicle’s fluids (i.e., engine oil, trans- steering capability if power assist is lost.
Page 238: Power Steering Fluid Check
236 STARTING AND OPERATING system. This noise should be considered normal, and it CAUTION! does not in any way damage the steering system. Do not use chemical flushes in your power steering CAUTION! system as the chemicals can damage your power steering components.
Page 239: Parking Brake
STARTING AND OPERATING 237 PARKING BRAKE WARNING! Before leaving the vehicle, make sure you fully apply the parking brake and shift the transmission into REVERSE. Failure to do so may cause the vehicle to roll and cause damage or injury. As an added precaution when parking the vehicle, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
Page 240 238 STARTING AND OPERATING The “Brake System Warning Light” in the instrument WARNING! cluster will turn on when the ignition is in the ON/RUN • Never leave children alone in a vehicle, or with position and the parking brake is applied. access to an unlocked vehicle.
Page 241: Brake System
STARTING AND OPERATING 239 BRAKE SYSTEM Brake Pad Break-In NOTE: Your vehicle is equipped with a high perfor- Your vehicle is equipped with dual hydraulic mance braking system. The brake pads are a semi- brake systems. If either of the two hydraulic metallic compound, which offer superior fade resistance systems loses normal capability, the remaining for consistent operation.
Page 242 240 STARTING AND OPERATING Safe Operating Tips WARNING! (Continued) • Do not drive too fast for road conditions, especially WARNING! when roads are wet or slushy. A wedge of water can To use your brakes and accelerator more safely, build up between the tire tread and the road. This follow these tips: hydroplaning action can cause loss of traction, •...
Page 243: Electronic Brake Control System
STARTING AND OPERATING 241 ELECTRONIC BRAKE CONTROL SYSTEM The ABS conducts a low-speed self-test at approximately 12 mph (20 km/h). If you have your foot lightly on the Your vehicle is equipped with an advanced electronic brake pedal while this test is occurring, you may feel a brake control system that includes the Anti-Lock Brake slight pedal movement.
Page 244 242 STARTING AND OPERATING WARNING! WARNING! (Continued) • The Anti-Lock Brake System (ABS) cannot prevent • The Anti-Lock Brake System (ABS) contains so- the natural laws of physics from acting on the phisticated electronic equipment that may be sus- vehicle, nor can it increase braking or steering ceptible to interference caused by improperly in- efficiency beyond that afforded by the condition of stalled...
Page 245: Traction Control System (Tcs)
STARTING AND OPERATING 243 properly inflated to produce accurate signals for the speeds, it may indicate a system malfunction or that the computer. system is inoperative. In this case, the system reverts to standard non-anti-lock brakes. If this occurs, safely bring WARNING! the vehicle to a complete stop as soon as possible and cycle the ignition to attempt to reset the ABS.
Page 246: Electronic Stability Control
244 STARTING AND OPERATING • Understeer – when the vehicle is turning less than Electronic Stability Control appropriate for the steering wheel position. In full on mode the TCS system enhances directional control and stability of the vehicle under various driving WARNING! conditions.
Page 247 STARTING AND OPERATING 245 Electronic Stability Control (ESC) Operating The ESC system may have five available operating Modes modes: ESC On This is the normal operating mode for the ESC system. Whenever the vehicle is started, the ESC system will be in this mode.
Page 248 246 STARTING AND OPERATING ESC OFF message will display in the vehicle cluster (left the “ESC” switch once (located on the steering wheel). of the odometer). The “ESC OFF” message may appear in The “ESC Sport Light” will illuminate, and the ESC the Driver Information Display (DID).
Page 249: Tire Safety Information
STARTING AND OPERATING 247 roads during cold temperatures, or when the driver TIRE SAFETY INFORMATION wants enhanced stability due to lack of familiarity or Tire Markings experience with the vehicle’s response. To enter the “Rain Mode” mode, press the “ESC” switch three times. The “ESC Rain Light”...
Page 250 248 STARTING AND OPERATING • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 251 STARTING AND OPERATING 249 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 252 250 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 253: Tire Identification Number (Tin)
STARTING AND OPERATING 251 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 254: Tire Terminology And Definitions
252 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured.
Page 255 STARTING AND OPERATING 253 Term Definition Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall. Recommended Cold Tire Inflation Vehicle manufacturer’s recommended cold tire inflation pressure Pressure as shown on the tire placard.
Page 256: Tire Loading And Tire Pressure
254 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 257 STARTING AND OPERATING 255 Tire And Loading Information Placard 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
Page 258 256 STARTING AND OPERATING XXX kg” on the Tire and Loading Information placard. is 650 lbs (295 kg) (since 5 x 150 lbs (68 kg) = 750 lbs The combined weight of occupants, cargo/luggage and (340 kg), and 1400 lbs (635 kg) – 750 lbs (340 kg) = trailer tongue weight (if applicable) should never exceed 650 lbs [295 kg]).
Page 259 STARTING AND OPERATING 257...
Page 260: Tires - General Information
258 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 261: Tire Inflation Pressures
STARTING AND OPERATING 259 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 262 260 STARTING AND OPERATING At least once a month: mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.
Page 263: Tire Pressures For High Speed Operation
STARTING AND OPERATING 261 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
Page 264: Tire Types
262 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (spring, • The tire has not been driven on when flat. summer, fall and winter).
Page 265 STARTING AND OPERATING 263 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires summer tires only in sets of four; failure to do so may during the winter.
Page 266: Run Flat Tires - If Equipped
264 STARTING AND OPERATING While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
Page 267 STARTING AND OPERATING 265 equipment tire and wheel found on the front or rear axle Since this tire has limited tread life, the original equip- of your vehicle. This spare tire may be used in the tire ment tire should be repaired (or replaced) and reinstalled rotation for your vehicle.
Page 268 266 STARTING AND OPERATING Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
Page 269: Tire Spinning
STARTING AND OPERATING 267 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
Page 270: Life Of Tire
268 STARTING AND OPERATING • Performance tires, tires with a speed rating of V or These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth higher, and summer tires typically have a reduced becomes a 1/16 of an inch (2 mm).
Page 271 STARTING AND OPERATING 269 wear and correct cold tire inflation pressures. The manu- you may have on tire specifications or capability. Failure facturer strongly recommends that you use tires equiva- to use equivalent replacement tires may adversely affect lent to the originals in size, quality and performance the safety, handling, and ride of your vehicle.
Page 272: Tire Chains (Traction Devices)
270 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) WARNING! (Continued) Due to limited clearance, tire chains or traction devices • Never use a tire with a smaller load index or are not recommended. capacity, other than what was originally equipped on your vehicle.
Page 273: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 271 tires. Rotation will increase tread life, help to maintain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the “Maintenance Schedule” for the proper maintenance interval. Remember, more frequent rotation is permissible if desired.
Page 274 272 STARTING AND OPERATING readings to the receiver module. It is particularly impor- cold inflation tire pressure. This is defined as the tire tant for you to check the tire pressure in all of the tires on pressure after the vehicle has not been driven for at least your vehicle monthly and to maintain the proper pres- three hours, or driven less than 1 mile (1.6 km) after a sure.
Page 275 STARTING AND OPERATING 273 cold placard pressure. Once the low tire pressure warning TPM Telltale Light will turn OFF only after the tires are (Tire Pressure Monitoring [TPM] Telltale Light) illumi- inflated to the vehicle’s recommended cold placard pres- nates, you must increase the tire pressure to the recom- sure value.
Page 276: Premium System
274 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- CAUTION! (Continued) nance, and it is the driver’s responsibility to maintain • After inspecting or adjusting the tire pressure, correct tire pressure using an accurate tire pressure always reinstall the valve stem cap.
Page 277 STARTING AND OPERATING 275 • Receiver module Should this occur, you should stop as soon as possible and inflate the tires with a low pressure condition (those • Four TPM sensors in a different color in the DID graphic) to the vehicle’s •...
Page 278 276 STARTING AND OPERATING seconds and then display dashes (- -) in place of the 4. Using tire chains on the vehicle. pressure value to indicate which sensor is not being 5. Using wheels/tires not equipped with TPM sensors. received. The DID will also display a SERVICE TPM SYSTEM If the ignition switch is cycled, this sequence will repeat, message for a minimum of five seconds when a system...
Page 279: Fuel Requirements
STARTING AND OPERATING 277 • This device must accept any interference received, Light spark knock at low engine speeds is not harmful to including interference that may cause undesired op- your engine. However, continued heavy spark knock at eration. high speeds can cause damage and immediate service is required.
Page 280: Reformulated Gasoline
278 STARTING AND OPERATING Reformulated Gasoline CAUTION! Many areas of the country require the use of cleaner DO NOT use gasoline containing Methanol or gaso- burning gasoline referred to as “Reformulated Gasoline.” line containing more than 10% Ethanol. Use of these Reformulated gasoline contain oxygenates and are spe- blends may result in starting and drivability prob- cifically blended to reduce vehicle emissions and im-...
Page 281: E-85 Usage In Non-Flex Fuel Vehicles
STARTING AND OPERATING 279 • Change the engine oil and oil filter. E-85 Usage In Non-Flex Fuel Vehicles • Disconnect and reconnect the battery to reset the Non-Flex Fuel Vehicles (FFV) are compatible with gaso- line containing up to 10% ethanol (E10). Gasoline with engine controller memory.
Page 282: Materials Added To Fuel
280 STARTING AND OPERATING therefore, you should ask your gasoline retailer whether Fuel System Cautions the gasoline contains MMT. MMT is prohibited in Federal and California reformulated gasoline. CAUTION! Materials Added To Fuel Follow these guidelines to maintain your vehicle’s performance: All gasoline sold in the United States is required to •...
Page 283: Carbon Monoxide Warnings
STARTING AND OPERATING 281 Carbon Monoxide Warnings CAUTION! (Continued) • The use of fuel additives, which are now being WARNING! sold as octane enhancers, is not recommended. Carbon monoxide (CO) in exhaust gases is deadly. Most of these products contain high concentrations Follow the precautions below to prevent carbon of methanol.
Page 284: Adding Fuel
282 STARTING AND OPERATING NOTE: In certain cold conditions, ice may prevent the WARNING! (Continued) fuel door from opening. If this occurs, lightly push on the • Guard against carbon monoxide with proper main- fuel door to break the ice buildup and re-release the fuel tenance.
Page 285 STARTING AND OPERATING 283 NOTE: A funnel is provided (located in the trunk in the WARNING! spare tire area) to open the flapper door to allow for • Never have any smoking materials lit in or near the emergency refueling with a gas can. vehicle when the fuel door is open or the tank is CAUTION! being filled.
Page 286: Emergency Fuel Filler Door Release
284 STARTING AND OPERATING Emergency Fuel Filler Door Release If you are unable to open the fuel filler door, use the fuel filler door emergency release procedure by following the proceeding steps. 1. Open the liftgate. 2. Locate the carpet access door (on the right side inner trim panel of the trunk).
Page 287 STARTING AND OPERATING 285 3. Pull the edge of the access door on the right side inner 4. Pull the release cable to release the fuel door. trim panel to expose the emergency release cable. Release Cable Edge Of Access Door...
Page 288: Trailer Towing
286 STARTING AND OPERATING 5. Return the release cable to the original position (inside the inner trim panel) and push the carpet back into the original position. Fuel Door Open Carpet Into Original Position TRAILER TOWING Trailer towing with this vehicle is not recommended.
Page 289: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 287 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) Towing Condition Wheels OFF The Ground Manual Transmission Flat Tow None NOT ALLOWED Dolly Tow Front NOT ALLOWED Rear NOT RECOMMENDED...
Page 290: Ground Clearance
288 STARTING AND OPERATING GROUND CLEARANCE The front and rear fascias and side sills ride low and ground clearance is limited. CAUTION! Damage to the front and rear fascias and side sills can occur if you disregard the low ground clearance in these areas of your vehicle.
Page 291: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS ▫ Tire Service Kit Usage Precautions..295 HAZARD WARNING FLASHER ...290 ▫ Sealing A Tire With Tire Service Kit ..297 IF YOUR ENGINE OVERHEATS .
Page 292: Hazard Warning Flasher
290 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER NOTE: With extended use the Hazard Warning flasher may wear down your battery. The Hazard Warning flasher switch is located in the center of the instrument panel above the climate controls. IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the Push the switch to turn on the Hazard Warning...
Page 293: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 291 • If your air conditioner (A/C) is on, turn it off. The A/C WHEEL AND TIRE TORQUE SPECIFICATIONS system adds heat to the engine cooling system and Proper lug nut/bolt torque is very important to ensure turning the A/C off can help remove this heat.
Page 294 292 WHAT TO DO IN EMERGENCIES Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated Wheel Mounting Surface against the wheel.
Page 295: Tire Service Kit - If Equipped
WHAT TO DO IN EMERGENCIES 293 Tire Service Kit Storage WARNING! The Tire Service Kit is located in the left side of the trunk. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
Page 296: Tire Service Kit Components And Operation
294 WHAT TO DO IN EMERGENCIES Tire Service Kit Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 297: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 295 Using The Power Button Push and release the Power Button (4) once to turn On the Tire Service Kit. Push and release the Power Button (4) again to turn Off the Tire Service Kit. Using The Deflation Button Push the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
Page 298 296 WHAT TO DO IN EMERGENCIES from the vehicle or tire and wheel components. Once WARNING! the sealant dries, it can easily be peeled off and • Do not attempt to seal a tire on the side of the properly discarded. vehicle closest to traffic.
Page 299: Sealing A Tire With Tire Service Kit
WHAT TO DO IN EMERGENCIES 297 WARNING! (Continued) WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Tire Service Kit Sealant solution contains latex. In heat source. case of an allergic reaction or rash, consult a phy- •...
Page 300 298 WHAT TO DO IN EMERGENCIES on the ground. This will provide the best positioning 4. Remove the cap from the valve stem and then screw of the kit when injecting the sealant into the deflated the fitting at the end of the Sealant Hose (6) onto the tire and running the air pump.
Page 301 WHAT TO DO IN EMERGENCIES 299 NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 –...
Page 302 300 WHAT TO DO IN EMERGENCIES latch pillar (recommended pressure). Check the tire 3. Immediately disconnect the Sealant Hose (6) from the pressure by looking at the Pressure Gauge (3). valve stem, reinstall the cap on the fitting at the end of the hose, and place the Tire Service Kit in the vehicle If the tire does not inflate to at least 26 psi (1.8 Bar) storage location.
Page 303 WHAT TO DO IN EMERGENCIES 301 (D) Drive Vehicle: (E) After Driving: Immediately after injecting sealant and inflating the tire, Pull over to a safe location. Refer to “Whenever You Stop drive the vehicle 5 miles (8 km) or 10 minutes to ensure to Use Tire Service Kit”...
Page 304 302 WHAT TO DO IN EMERGENCIES If the tire pressure is 19 psi (1.3 Bar) or higher: 5. Remove the Speed Limit sticker from the instrument panel after the tire has been repaired. 1. Push the Power Button (4) to turn on Tire Service Kit and inflate the tire to the pressure indicated on the tire 6.
Page 305: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 303 4. Clean any remaining sealant from the Tire Service Kit JUMP-STARTING PROCEDURES housing. WARNING! 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in •...
Page 306 304 WHAT TO DO IN EMERGENCIES NOTE: The battery is located underneath an access Connecting The Jumper Cables panel inside the rear compartment on the left side of the 1. Wear eye protection and remove any metal jewelry vehicle. A remote battery terminal is located in the engine such as watchbands or bracelets that might make an compartment for jump-starting.
Page 307 WHAT TO DO IN EMERGENCIES 305 CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 6. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle.
Page 308 306 WHAT TO DO IN EMERGENCIES Disconnecting The Jumper Cables WARNING! 1. Disconnect the negative (-) end of the jumper cable Do not connect the jumper cable to the negative (-) from the remote negative (-) post of the vehicle with post of the discharged battery.
Page 309: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 307 motion, without spinning the wheels, or racing the CAUTION! engine. Accessories plugged into the vehicle power outlets CAUTION! draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if •...
Page 310: Towing A Disabled Vehicle
308 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE WARNING! Do not tow with sling-type equipment. Only use flatbed Fast spinning tires can be dangerous. Forces gener- equipment. Always comply with applicable state or local ated by excessive wheel speeds may cause damage, or towing ordinances.
Page 311 MAINTAINING YOUR VEHICLE CONTENTS ▫ Maintenance-Free Battery ....318 ENGINE COMPARTMENT — 8.4L ..311 ▫ Hibernation Mode ....320 ONBOARD DIAGNOSTIC SYSTEM (OBD II) .
Page 312 310 MAINTAINING YOUR VEHICLE ▫ Hydraulic Clutch .....335 ▫ Front/Rear Side Marker Lamp ... .356 ▫...
Page 313: Engine Compartment - 8.4L
MAINTAINING YOUR VEHICLE 311 ENGINE COMPARTMENT — 8.4L 1 — Washer Fluid Reservoir 6 — Brake/Clutch Fluid Reservoir 2 — Coolant Pressure Cap 7 — Engine Oil Fill 3 — Engine Oil Dipstick 8 — Power Steering Fluid Reservoir 4 — Power Distribution Center 9 —...
Page 314: Onboard Diagnostic System (Obd Ii)
312 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! To meet new government regulations and promote Prolonged driving with the light on could cause cleaner air, your vehicle is equipped with a sophisticated further damage to the emission control system. It onboard diagnostic system called OBD II.
Page 315 MAINTAINING YOUR VEHICLE 313 Indicator Light (MIL)” is functioning and is not on when 2. As soon as you cycle the ignition switch to the ON the engine is running, and that the OBD II system is position, you will see the Malfunction Indicator Light ready for testing.
Page 316: Replacement Parts
314 MAINTAINING YOUR VEHICLE recently serviced or had a battery failure or replacement, DEALER SERVICE you may need to do nothing more than drive your Your authorized dealer has the qualified service person- vehicle as you normally would in order for your OBD II nel, special tools, and equipment to perform all service system to update.
Page 317: Maintenance Procedures
MAINTAINING YOUR VEHICLE 315 MAINTENANCE PROCEDURES CAUTION! (Continued) The pages that follow contain the required maintenance • Your vehicle has been built with improved fluids services determined by the engineers who designed your that protect the performance and durability of your vehicle.
Page 318 316 MAINTAINING YOUR VEHICLE fully warmed engine is shut off. Do not check oil level NOTE: Under no circumstances should oil change inter- before starting the engine after it has sat overnight. vals exceed 6,000 miles (10,000 km) or six months, Checking engine oil level when the engine is cold will whichever occurs first.
Page 319: Engine Oil Filter
MAINTAINING YOUR VEHICLE 317 Engine Oil Viscosity (SAE Grade) indiscriminately discarded, can present a problem to the environment. Contact your authorized dealer, service SAE 0W-40 engine oil such as MOPAR® or Pennzoil station or governmental agency for advice on how and Ultra®...
Page 320: Engine Air Cleaner Filter
318 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter used to assure most efficient service. MOPAR® engine air cleaner filters are a high quality filter and are recom- Refer to the “Maintenance Schedule” for the proper mended. maintenance intervals. CAUTION! WARNING! Some aftermarket air cleaners and filters can cause The air induction system (air cleaner, hoses, etc.) can mass air flow sensor issues which can lead to a...
Page 321 MAINTAINING YOUR VEHICLE 319 To gain access to the battery, remove the floor portion of WARNING! the rear compartment carpet. • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing.
Page 322: Hibernation Mode
320 MAINTAINING YOUR VEHICLE of storage time without losing radio and engine control- CAUTION! ler adaptive memory. Using this feature is an alternative • It is essential when replacing the cables on the to disconnecting the battery. battery that the positive cable is attached to the NOTE: This vehicle is designed to sit in storage with a positive post and the negative cable is attached to fully charged battery for up to 30 days.
Page 323: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 321 3. Press the right arrow button on the steering wheel WARNING! controls for one second. Vehicle will countdown from • Use only refrigerants and compressor lubricants ten seconds and enter Hibernation Mode. approved by the manufacturer for your air condi- NOTE: You may press the right arrow button on the tioning system.
Page 324: Body Lubrication
322 MAINTAINING YOUR VEHICLE Body Lubrication CAUTION! Locks and all body pivot points, including such items as Do not use chemical flushes in your air conditioning seat tracks, door hinge pivot points and rollers, liftgate, system as the chemicals can damage your air condi- tailgate, decklid, sliding doors and hood hinges, should tioning components.
Page 325: Wiper Blades
MAINTAINING YOUR VEHICLE 323 Wiper Blades NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor perfor- Clean the rubber edges of the wiper blades and the mance of blades may be present with chattering, marks, windshield and rear window periodically with a sponge water lines or wet spots.
Page 326: Exhaust System
324 MAINTAINING YOUR VEHICLE exhaust system inspected each time the vehicle is raised WARNING! for lubrication or oil change. Replace as required. Commercially available windshield washer solvents WARNING! are flammable. They could ignite and burn you. Care must be exercised when filling or working around •...
Page 327 MAINTAINING YOUR VEHICLE 325 Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 328: Cooling System
326 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis- motion.
Page 329 MAINTAINING YOUR VEHICLE 327 Coolant Checks If the cap is sealing properly, the engine coolant (anti- freeze) will begin to drain from the coolant recovery Check engine coolant (antifreeze) protection every 12 bottle. DO NOT REMOVE THE COOLANT PRESSURE months (before the onset of freezing weather, where CAP WHEN THE COOLING SYSTEM IS HOT.
Page 330 328 MAINTAINING YOUR VEHICLE Selection Of Coolant CAUTION! (Continued) Refer to “Fluids, Lubricants, and Genuine Parts” in OAT coolant (conforming to MS.90032), by an au- “Maintaining Your Vehicle” for further information. thorized dealer as soon as possible. • Do not use water alone or alcohol-based engine CAUTION! coolant (antifreeze) products.
Page 331 MAINTAINING YOUR VEHICLE 329 • Use only high purity water such as distilled or deion- miles (240,000 km) before replacement. To prevent reduc- ing this extended maintenance period, it is important that ized water when mixing the water/engine coolant you use the same engine coolant (OAT coolant conform- (antifreeze) solution.
Page 332 330 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If • The warning words “DO NOT OPEN HOT” on the HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with cooling system pressure cap are a safety precaution.
Page 333 MAINTAINING YOUR VEHICLE 331 rules for your community. To prevent ingestion by ani- of this. As long as the engine operating temperature is mals or children, do not store ethylene glycol-based satisfactory, the coolant bottle need only be checked once engine coolant (antifreeze) in open containers or allow it a month.
Page 334: Brake System
332 MAINTAINING YOUR VEHICLE • Make sure that the coolant expansion bottle overflow If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. •...
Page 335 MAINTAINING YOUR VEHICLE 333 Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reser- Riding the brakes can lead to brake failure and voir.
Page 336 334 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) cause it to boil unexpectedly during hard or pro- • Use only manufacturer’s recommended brake longed braking, resulting in sudden brake failure. fluid. Refer to “Fluids, Lubricants, and Genuine This could result in a accident. Parts”...
Page 337: Manual Transmission
MAINTAINING YOUR VEHICLE 335 brake fluid must be changed at the intervals specified in CAUTION! the “Maintenance Schedule.” Refer to “Maintenance Schedule” for further information. See your authorized Using a transmission fluid other than the manufac- dealer for service. turer’s recommended fluid may cause deterioration in transmission shift quality and/or damage to the Manual Transmission transmission.
Page 338: Rear Axle
336 MAINTAINING YOUR VEHICLE manufacturer’s recommended brake fluid. Refer to “Flu- CAUTION! ids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using axle fluid other than the manufactured recom- mended fluid may cause a shudder/noise issue. refer Rear Axle to “Fluids Lubes and Genuine Parts”...
Page 339 MAINTAINING YOUR VEHICLE 337 • Use a high quality cleaner wax, such as MOPAR® highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contami- Cleaner Wax to remove road film, stains and to protect nants, road surfaces on which the vehicle is operated, your paint finish.
Page 340 338 MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care NOTE: If your vehicle is equipped with Dark Vapor Chrome wheels DO NOT USE wheel cleaners, abrasives • All wheels and wheel trim, especially aluminum and or polishing compounds. They will permanently damage chrome plated wheels, should be cleaned regularly this finish and such damage is not covered by the New with a mild soap and water to prevent corrosion.
Page 341 MAINTAINING YOUR VEHICLE 339 Stubborn soils can be removed easily with a soft cloth Leather or Vinyl Seat/Trim Care and Cleaning and MOPAR® Total Clean. Care should be taken to avoid Leather is best preserved by regular cleaning with a soaking your leather upholstery with any liquid.
Page 342 340 MAINTAINING YOUR VEHICLE equipped with radio antennas. Do not use scrapers or Seat Belt Maintenance other sharp instrument that may scratch the elements. Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. When cleaning the rear view mirror, spray cleaner on the Sun damage can also weaken the fabric.
Page 343 MAINTAINING YOUR VEHICLE 341 WARNING! (Continued) assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn web- bing, etc.). Aero Group (Front Splitter) — If Equipped The front splitter will not flex or compress against impacts from the front.
Page 344: Fuses
342 MAINTAINING YOUR VEHICLE FUSES CAUTION! WARNING! Use care when approaching parking blocks, tall speed bumps and garage curbs. These surfaces can • When replacing a blown fuse, always use an ap- damage your splitter. propriate replacement fuse with the same amp rating as the original fuse.
Page 345: Power Distribution Center
MAINTAINING YOUR VEHICLE 343 WARNING! (Continued) • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer. Power Distribution Center The Power Distribution Center is located in the engine compartment on the driver’s side of the vehicle.
Page 346 344 MAINTAINING YOUR VEHICLE Cavity Relay Cartridge Mini-Fuse Description Fuse — 40 Amp — Rad Fan Rly High Green — 40 Amp — ABS/ESP Pump Feed Green — 40 Amp — Starter Green — 40 Amp — CBC (Ext. Lighting #1) Green —...
Page 347 MAINTAINING YOUR VEHICLE 345 Cavity Relay Cartridge Mini-Fuse Description Fuse — — 20 Amp Horn Yellow — — 10 Amp Red A/C Clutch — — 10 Amp Red Diagnostic, Fuel Door, Stop Switch — — 15 Amp Blue KIN, RF Hub —...
Page 348 346 MAINTAINING YOUR VEHICLE Cavity Relay Cartridge Mini-Fuse Description Fuse — — 25 Amp PCM-Powertrain Control Module Clear — — 25 Amp Fuel Pump Clear — — 20 Amp ASD #1 Yellow — — 20 Amp ASD #2 Yellow — —...
Page 349 MAINTAINING YOUR VEHICLE 347 Cavity Relay Cartridge Mini-Fuse Description Fuse — 20 Amp — Run Acc relay Yellow — — — B+ Jumper — — — Spare — — 10 Amp Red ORC Mod Run — — 15 Amp Blue Cluster, Camera —...
Page 350 348 MAINTAINING YOUR VEHICLE Cavity Relay Cartridge Mini-Fuse Description Fuse 43AC — — 2 Amp Grey SCCM (Forward Fuse) 43BE — — 10 Amp Red Corax (Rearward Fuse) 44AC — — 10 Amp Red Rear View Mirror, Aux Port Jumper. (Forward Fuse) 44BE...
Page 351 MAINTAINING YOUR VEHICLE 349 Cavity Relay Cartridge Mini-Fuse Description Fuse — — 10 Amp Red SCCM — — 25 Amp Amplifier Clear HC Micro — — Rad Fan HC Micro — — Rad Fan Relay SER/PAR HC Micro — — Starter Relay HC Micro —...
Page 352 350 MAINTAINING YOUR VEHICLE Cavity Relay Cartridge Mini-Fuse Description Fuse G8VA — — Run Relay #1 G8VA — — Run Relay #2 HC Micro — — ASD #1 HC Micro — — ASD #2 G8VA — — Run Accy #1, Pop Up, Driver Door Window Switch NOTE: A 15 Amp fuse for the radio system is located CAUTION! in-line at the battery positive terminal.
Page 353: Vehicle Storage
MAINTAINING YOUR VEHICLE 351 • Check that the radiator coolant level of protection is to CAUTION! (Continued) at least -20°F (-29°C). • When replacing a blown fuse, it is important to use • Make sure that all tires are inflated to the optimum only a fuse having the correct amperage rating.
Page 354 352 MAINTAINING YOUR VEHICLE • If the vehicle will be subjected to freezing tempera- • Cover the vehicle whenever possible to prevent acci- tures, either remove the battery and store it in a dry, dental damage to the finish. well ventilated area or connect a trickle charger (1.5 NOTE: Disconnecting the battery causes the engine con- Amp) with automatic shutdown / overcharge protec- trol system to lose memory of some “learned”...
Page 355 MAINTAINING YOUR VEHICLE 353 Check the battery every four to six weeks to ensure that 3. Make sure that the HOOD, LIFTGATE, and DOOR the voltage is above 12.10 Volts. The voltage will drop switches are in adjustment. Perform the quick system more rapidly in hot temperatures.
Page 356: Replacement Bulbs
354 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Interior Bulbs Bulb Number Message Center Indicators Cluster LED (Serviced at Authorized Dealer) Gauge Pack Heater Control Interior Lamp LED (Serviced at Authorized Dealer) Courtesy Foot Well Lights LED (Serviced at Authorized Dealer) Cargo Lamp (Coupe Liftgate)
Page 357 MAINTAINING YOUR VEHICLE 355 Exterior Bulbs Bulb Number Low/High Beam Headlamp HID (Serviced at Authorized Dealer) Front Park/Turn Signal Lamp LED (Serviced at Authorized Dealer) Daytime Running Lamp (DRL) LED (Serviced at Authorized Dealer) Front Side Marker Lamp 2821M Center High Mounted Stop Lamp (CHMSL) LED (Serviced at Authorized Dealer) Tail/Stop/Turn Signal Lamp LED (Serviced at Authorized Dealer)
Page 358: Bulb Replacement
356 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Taillamp, Tail/Stop Lamp For bulb replacement, see your authorized dealer. NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric Rear Turn Signal Lamp conditions change to allow the condensation to change For bulb replacement, see your authorized dealer.
Page 359: Fluid Capacities
MAINTAINING YOUR VEHICLE 357 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 16 Gallons 60.6 Liters Engine Oil With Filter We recommend you use synthetic SAE 0W-40, API Certified. 11 Quarts 10.4 Liters Transmission We recommend you use MOPAR® ATF+4® Automatic 3.4 Quarts 3.2 Liters Transmission Fluid.
Page 360: Fluids, Lubricants And Genuine Parts
358 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. Engine Oil We recommend you use a full synthetic 0W-40 engine oil such as MOPAR® or Pennzoil Ultra or equivalent engine oil.
Page 361 MAINTAINING YOUR VEHICLE 359 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 362: Chassis
360 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Transmission We recommend you use MOPAR® ATF+4® Automatic Transmis- sion Fluid. Rear Axle We recommend you use Castrol SAF-XJ/SAE 75W-140 Synthetic Gear and Axle Lubricant. Brake/Clutch Master Cylinder We recommend you use MOPAR® Brake and Clutch Fluid DOT 4 Motor Vehicle.
Page 363 MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULES ... . .362 ▫ MAINTENANCE CHART ....364...
Page 364 362 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULES At Each Stop For Fuel • Check the engine oil level about five minutes after a The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified fully warmed engine is shut off. Checking the oil level to protect your vehicle warranty and ensure the best while the vehicle is on level ground will improve the vehicle performance and reliability.
Page 365 MAINTENANCE SCHEDULES 363 Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. Rotate tires at the first sign of irregular wear, • Inspect the exhaust system. even if it occurs before your next scheduled service.
Page 366: Maintenance Chart
364 MAINTENANCE SCHEDULES MAINTENANCE CHART Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before scheduled maintenance.
Page 367 MAINTENANCE SCHEDULES 365 Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Change the manual transmis- sion fluid. Inspect the manual transmis- sion fluid, add as necessary. Change the rear axle fluid.
Page 368 366 MAINTENANCE SCHEDULES Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Inspect and replace the PCV Valve if necessary Replace the spark plugs ** Flush and replace the engine coolant at 120 months if not done at 150,000 miles (240,000 km).
Page 369 MAINTENANCE SCHEDULES 367 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 371: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .371 Impaired (TDD/TTY).
Page 372 370 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .377 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....377 ▫...
Page 373: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 371 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 374: Fca Us Llc Customer Center
372 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized FCA US LLC Customer Center dealer service manager first.
Page 375: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 373 In Mexico Contact Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 376: Warranty Information
374 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust (internal combustion engines only), manufacturer’s service contract.
Page 377: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 375 MOPAR® PARTS campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 378: Publication Order Forms
376 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 379: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 377 Call toll free at: Treadwear • 1-800-890-4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled • 1-800-387-1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 380: Temperature Grades
378 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 381 INDEX...
Page 382 380 INDEX About Your Brakes ......239 Air Bag Deployment ......44 ABS (Anti-Lock Brake System) .
Page 383 INDEX 381 Auto Down Power Windows ....28 B-Pillar Location ......254 Automatic Door Locks .
Page 384 382 INDEX Radiator (Coolant Pressure) ....330 Cleaning Carbon Monoxide Warning ....82 Wheels .
Page 385 INDEX 383 Corrosion Protection ..... . .336 Key Fob Emergency Key ....22 Cruise Light .
Page 386 384 INDEX Overheating ......290 Engine Oil Viscosity ..... . .317 Towing .
Page 387 INDEX 385 Fluid Capacities ......357 Gauge .......149 Fluid Leaks .
Page 388 386 INDEX Ground Clearance ......288 Hood Release ......100 Hydraulic Clutch Fluid .
Page 389 INDEX 387 Remote Battery Replacement ....22 Anti-Lock ......155 Key-In Reminder .
Page 390 388 INDEX Interior ......106 Door ....... . .24 Lights On Reminder .
Page 391 INDEX 389 Outside .......91 Filter ....... .317 Rearview .
Page 392 390 INDEX Pets........81 Rear Camera......118 Placard, Tire And Loading Information .
Page 393 INDEX 391 Replacement Parts......314 Lap/Shoulder Belt Operation ....37 Replacement Tires .
Page 394 392 INDEX Seats ........94 Snow Chains (Tire Chains) ....270 Adjustment .
Page 395 INDEX 393 Storage, Vehicle......203 Pressure Monitor System (TPMS) ... .271 Stuck, Freeing .
Page 396 394 INDEX Trailer Towing ......286 Upholstery Care ......339 Transmission .
Page 397 INDEX 395 Washing Vehicle ......337 Water Driving Through ......233 Wheel And Wheel Trim .
Page 399 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 400 FCA US LLC 15ZD-126-AC Third Edition Printed in U.S.A.

This manual is also suitable for:

2014 srt viper

Dodge Viper SRT 2015 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

What to Do in Emergencies

Maintaining Your Vehicle

If You Need Consumer Assistance

Quick Links

Chapters

Related Manuals for Dodge Viper SRT 2015

Summary of Contents for Dodge Viper SRT 2015