Dodge Challenger SRT 2016 Owner's Manual page 300

298 UNDERSTANDING YOUR INSTRUMENT PANEL
• Equalizer
This feature allows you to adjust the Bass, Mid and Treble
settings. Adjust the settings with the "+" and "–" setting
buttons on the touchscreen or by selecting any point on
the scale between the "+" and "–" buttons on the
touchscreen.
NOTE: Bass/Mid/Treble allow you to simply slide your
finger up or down to change the setting as well as press
directly on the desired setting.
• Speed Adjusted Volume
This feature increases or decreases volume relative to
vehicle speed. To change the Speed Adjusted Volume
press the "Off," "1," "2" or "3" button on the touchscreen.
• Surround Sound — If Equipped
This feature provides simulated surround sound mode.
To make your selection, press the "Surround Sound"
button on the touchscreen, select "On" or "Off."
• AUX Volume Offset — If Equipped
This feature provides the ability to tune the audio level
for portable devices connected through the AUX input.
To make your selection, press the AUX Volume Match
button on the touchscreen, choose a level from –3 to +3.
• Loudness — If Equipped
Loudness improves sound quality at lower volumes. To
make your selection, press the "Loudness" button on the
touchscreen, until a check-mark appears next to the
setting, showing that the setting has been selected.
Phone/Bluetooth
After pressing the "Phone/Bluetooth" button on the
touchscreen the following settings will be available:
• Paired Phones
This feature shows which phones are paired to the
Phone/Bluetooth system. For further information, refer
to the Uconnect Owner's Manual Supplement.