Advertisement
Setup and Adjustments
Thermostat Operation Overview
Thermostat Interface Keys
The T600MSP-2 thermostat interface consists of
five keys on the front cover and one configuration
key (Figure 7) that is accessed by removing the
front cover. Use the:
•
YES/SCROLL key to:
−
confirm menu selections, and to advance to
the next menu item
−
stop the Status Display Menu from scrolling
and to manually scroll to the next parameter
on the menu. When left unattended for
45 seconds, the display resumes scrolling.
•
NO key when you do not desire a parameter
change, and to advance to the next menu item
•
MENU key to access the Main User Menu or exit
the menu
•
UP/DOWN arrow keys to:
−
adjust values
−
activate a Temporary Setpoint
4
T600MSP-2 Programmable Thermostat Installation Instructions
Backlit, plain text, Liquid
Crystal Display (LCD)
is easy to read in any
condition.
Five keys on the T600
make operation easy
and intuitive.
Figure 6: T600MSP-2 Thermostat Front Cover
Room Temp
75.0ºF
Light Emitting Diodes (LEDs)
indicate system activity.
Figure 7: Configuration Key Location
Backlit Liquid Crystal Display (LCD)
The T600MSP-2 thermostat uses a two-line,
eight-character backlit display. Low level backlighting
is present during normal operation and it brightens
when any user interface key is pressed. The backlight
returns to the lower level when the thermostat is left
unattended for 45 seconds.
Light-Emitting Diodes (LEDs)
Three LEDs are used to indicate the status of the fan,
call for heat, or call for cooling. When:
•
the fan is on, the FAN LED lights up
•
heating is on, the HEAT LED lights up
•
cooling is on, the COOL LED lights up
Programming Overview
There are three menus used to view, program, and
configure the T600MSP-2 thermostat: Status Display,
Main User, and Installer Configuration Menus.
Configuration
Key
Advertisement
