Sending Faxes Or Scanned Documents When Toner Has Run Out; Disposing Of Used Toner - Ricoh MP C2003 Series User Manual

Hide thumbs Also See for MP C2003 Series:

Table of Contents

• For details about how to check contact number where you can order supplies, see "Inquiry",

Maintenance and Specifications.

Sending Faxes or Scanned Documents When Toner Has Run Out

When the machine has run out of toner, the indicator on the display lights. Note that even if there is no

toner left, you can still send faxes or scanned documents.

• If number of communications executed after the toner has run out and not listed in the automatically

output Journal exceeds 200, communication is not possible.

Display the initial facsimile or scanner screen.

• When using the standard operation panel

Press the [Home] key on the top left of the control panel, and press the [Facsimile] icon or the

[Scanner] icon on the [Home] screen.

• When using the Smart Operation Panel

Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then

press the [Fax] icon or the [Scanner] icon on the Home screen 4.

Press [Exit], and then perform transmission operation.

The error message disappears.

• Any reports are not printed.

This section describes what to do with used toner.

Toner cannot be re-used.

Adding Toner

Table of Contents

Mp c2503 series