Ricoh MP C2003 Series User Manual page 100

2. Getting Started
Program name
Scan to XXXX
(replace XXXX by a
destination name)
Storage scan:
XXXX
(replace XXXX by a
folder name)
Facsimile mode
Program name
Transmission result
notification fax
Specified time fax
transmission
Departmental fax
transmission
• Depending on the options installed, some functions cannot be registered. For details, see "Functions
Requiring Optional Configurations", Getting Started.
• The names of programs given above are just examples. You can assign any name to a program
according to your objectives.
• Depending on your business details or the type of documents to be scanned, registering a program
cannot be recommended.
62
Program description
Select e-mail or folder destinations
from the list that is registered in the
machine's Address Book, and then
specify the scan settings.
Specify a folder in [Target Folder to
Store] in [Store File].
Program description
Select [Preview] in the initial display
and specify [E-mail TX Results] in [TX
Mode].
Specify [Send Later] in [TX Mode].
Specify [Fax Header Print] in [TX
Mode].
Effect
If you register destinations and scan
settings that you use often, you can
skip the procedures to specify them
when sending a scanned file.
You can use folders to organize
stored files by user name or
intended use.
Effect
You can check whether the
transmission settings are correct
before and after transmission.
You can send a fax at a specified
time.
This setting can be used if the
receiver specifies forwarding
destinations by senders.