Table of Contents
Advertisement
4. Preventing Leakage of Information from Machines
6.
Press [Erase All Memory].
7.
Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8.
Press [Change].
9.
Enter the number of times that you want to overwrite using the number keys, and then
press [ ].
10.
Press [Erase].
11.
Press [Yes].
12.
When overwriting is completed, press [Exit], and then turn off the main power.
For details about turning off the main power, see "Turning On/Off the Power", Getting Started.
• Should the main power switch be turned off before "Erase All Memory" is completed, overwriting
will start over when the main power switch is turned back on.
• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and
then repeat from step 2.
Suspending Erase All Memory
The overwriting process can be suspended temporarily.
112
Advertisement
Chapters
Table of Contents
Troubleshooting
