Sfp-Ge-S Modules; Sfp-Ge-L Modules - Cisco 7600 series Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
Table 3-31 SFP Module Options
SFP Module
Product Number SFP Module
SFP-GE-Z Extended distance
(1000BASE-ZX)
SFP-GE-T Gigabit Ethernet SFP
module—1000BASE-T
Table 3-32
Specification
Connectors
Wavelength
Cabling distance
(maximum)
Operating temperature range
Storage temperature range
Supply Voltage range

SFP-GE-S Modules

The 1000BASE-SX (short wavelength) module operates on standard multimode fiber-optic link spans of
up to 500m on 50/125um MMF and 300 m on 62.5/125um MMF.

SFP-GE-L Modules

The 1000BASE-LX/LH (long wavelength/long haul) module interfaces fully comply with the IEEE
802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach 6.2 miles (10
km) over single-mode fiber (SMF) versus the 3.1 miles (5 km) specified in the standard.
OL-5052-08
Description
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended wavelength)
applications.
1000BASE-T SFP Transceiver Module for
Category 5 copper wire
SFP Module Specifications
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
5-Port Gigabit Ethernet SPA Overview
Description
LC-type connector
SFP-GE-S: 830-860 nm
SFP-GE-L: 1270-1360 nm
SFP-GE-Z: 1540-1570 nm
SFP-GE-T: N/A
SFP-GE-S: 500m on 50/125um MMF. 300m on
62.5/125um MMF.
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 ft. (100 m)
SFP-GE-S:-20 to 90 degrees C
SFP-GE-L:-40 to 85 degrees C
SFP-GE-Z: 0 to 85 degrees C
SFP-GE-T: 0 to 70 degrees C
SFP-GE-S: -40 to 100 degrees C
SFP-GE-L: -40 to 100 degrees C
SFP-GE-Z: -40 to 85 degrees C
SFP-GE-T: -40 to 85 degrees C
SFP-GE-S: 3.0 to 3.6 V
SFP-GE-L: 3.0 to 3.6 V
SFP-GE-Z: 0 to 4.0 V
SFP-GE-T: 3.1 to 3.5 V
3-51