Sfp-Ge-S Modules; Sfp-Ge-L Modules; Sfp-Ge-Z Modules - Cisco uBR10012 Hardware Installation Manual

Overview of Shared Port Adapters
Specification
Cabling distance (maximum)
Operating case temperature range
Storage temperature range
Supply voltage range

SFP-GE-S Modules

The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans of up
to 500 m on 50/125um multimode fiber (MMF) and 300 m on 62.5/125um MMF.

SFP-GE-L Modules

The 1000BASE-LX/LH (long-wavelength/long-haul) module interfaces fully comply with the IEEE 802.3z
1000BASE-LX standard. However, their higher optical quality allows them to reach 6.2 miles (10 km) over
single-mode fiber (SMF) versus the 3.1 miles (5 km) specified in the standard.

SFP-GE-Z Modules

The 1000BASE-ZX (extended wavelength) module operates on ordinary single-mode fiber-optic link spans
of up to 49.7 miles (80 km). Link spans of up to 62.1 miles (100 km) are possible using premium single-mode
fiber or dispersion-shifted single-mode fiber. (Premium single-mode fiber has a lower attenuation per unit
length than ordinary single-mode fiber; dispersion-shifted single-mode fiber has both lower attenuation and
less dispersion.)
The 1000BASE-ZX module must be coupled to a single-mode fiber-optic cable, which is the type of cable
typically used in long-haul telecommunications applications. The 1000BASE-ZX module does not operate
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
Cisco 5-Port Gigabit Ethernet SPA Cables and Connectors
Description
SFP-GE-S: 500 m on 50/125um MMF; 300 m on
62.5/125um MMF
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 ft. (100 m)
SFP-GE-S: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-L: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-Z: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-S: –40 to 185 degrees F (–40 to 85 degrees
C)
SFP-GE-L: –40 to 185 degrees F (–40 to 85 degrees
C)
SFP-GE-Z: –40 to 185 degrees F (–40 to 85 degrees
C)
SFP-GE-S: 3.1 to 3.5 V
SFP-GE-L: 3.1 to 3.5 V
SFP-GE-Z: 3.1 to 3.5 V
43