Cisco 7600 series Hardware Installation Manual page 103

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
1 TX (Transmit) connector
2 RX (Receive) connector
3
C/A (Carrier/Alarm) LED
The 2-Port Channelized T3/E3 ATM CEoP SPA LEDs are described in the following table.
Table 3-42
LED Label
C/A
A/L
STATUS
OL-5052-08
2-Port Channelized T3/E3 ATM CEoP SPA LEDs
Color State Meaning
Off Off Port is not enabled by software.
Green On Port is enabled by software.
Amber On Port is enabled by software, and there is at least one alarm.
Off Off Port is not enabled by software.
Green On Port is enabled by software, loopback is off.
Amber On Port is enabled by software, loopback is on.
Off Off SPA power is off.
Amber On SPA power is on and good, and SPA is being configured.
Green On SPA is ready and operational.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
2-Port Channelized T3/E3 ATM CEoP SPA
4 A/L (Active/Loopback)
5 STATUS LED
3-67