1-Port Oc-192C/Stm-64 Pos/Rpr Vsr Optics Spa Pos Spa Leds - Cisco 7600 series Hardware Installation Manual

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA:
•
•
•

1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA POS SPA LEDs

The 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA has six LEDs.
of these LEDs on a 1-Port OC-192c/STM-64 POS/RPR SPA.
Figure 3-29 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Faceplate
1
2
3
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In
Note
Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported.
The 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA LEDs are described in
Table 3-19 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA LEDs
LED Label
WRAP
PASSTHRU
MATESYNC
CARRIER
OL-5052-08
OC-3c/STM-1 POS SPA LEDs, page 3-15
OC-3c/STM-1 POS SPA Interface Specifications, page 3-15
OC-3c/STM-1 POS SPA SFP Optical Transceiver Modules and Cables, page 3-16
TX
WRAP LED
PASSTHRU LED
MATESYNC LED
Color State
Off Off
Green On
Amber On
Off Off
Amber On
Off Off
Green On
Off Off
1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Overview
1 3
2
RX
4 CARRIER LED
5
ACTIVE LED
6
STATUS LED
Meaning
Port is not in wrap mode.
Port is in wrap mode somewhere on the ring.
Port is in wrap mode locally.
Port is not in pass thru mode.
Port is in pass thru mode.
Mate port is not synchronized.
Mate port is synchronized.
Port is not enabled by software.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
Figure 3-23 shows an example
5
4 6
SPA-OC192POS VSR
Table 3-16.
3-37