2-Port Gigabit Ethernet Spa Cables And Connectors; Sfp Module Connections - Cisco 7600 series Hardware Installation Manual

Hide thumbs Also See for 7600 series:
Table of Contents

Advertisement

2-Port Gigabit Ethernet SPA Overview

2-Port Gigabit Ethernet SPA Cables and Connectors

The interface connectors on the 2-Port Gigabit Ethernet SPA are two individual fiber optic receivers that
support SFP modules. Each port can send and receive traffic using the optical fiber connections.

SFP Module Connections

The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit
Ethernet optical slots on the 2-Port Gigabit Ethernet SPA, linking the port with a 1000BASE-X
fiber-optic network.
The 2-Port Gigabit Ethernet SPA will only accept the SFP modules listed as supported in this document.
Note
An SFP check is run every time an SFP module is inserted into the 2-Port Gigabit Ethernet SPA and only
SFP modules that pass this check will be usable by the 2-Port Gigabit Ethernet SPA.
SFP modules exist for technologies other than Gigabit Ethernet and for products other than the 2-Port
Gigabit Ethernet SPA. However, the information in this document pertains only to SFP modules that plug
into the 2-Port Gigabit Ethernet SPA ports.
The SFP module has a receiver port (RX) and a transmitter port (TX) that compose one optical interface.
Table 3-27
Because the SPA-2X1GE-V2 has two native copper connectors, it does not support the SFP-GE-T.
Note
Table 3-27
SFP Module
Product Number
SFP-GE-S
SFP-GE-L
SFP-GE-Z
SFP-GE-T
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-46
and
Table 3-28
provide SFP module information and specifications.
SFP Module Options
SFP Module
Short wavelength
(1000BASE-SX)
Long wavelength/long haul
(1000BASE-LX/LH)
Extended distance
(1000BASE-ZX)
Gigabit Ethernet SFP
module—1000BASE-T
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
Description
Contains a Class 1 laser of 850 nm for
1000BASE-SX (short wavelength) applications.
Contains a Class 1 laser of 1310 nm for
1000BASE-LX/LH (long wavelength)
applications.
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended wavelength)
applications.
1000BASE-T SFP Transceiver Module for
Category 5 copper wire
OL-5052-08

Advertisement

Table of Contents
loading

Table of Contents