Interface Unit - Furuno CH-250 Installation Manual

2.4

Interface Unit

DATA/VIDEO IN DATA/VIDEO OUT RGB OUT
Transceiver unit cable
06S4078
The blackbox type is required to connect a standard VGA monitor via the interface unit IF-8000.
Supply monitor and interconnection cable (Max. length 15 m with Dsub-15P connectors of male,
three rows of 15 pins) locally. The monitor used should satisfy the specifications shown below.
•
VGA type
•
ANALOG RGB 0.7 Vpp, positive polarity
•
TLL level H, V, Negative polarity
Note: Cut and remove the rubber covers as below to attach connectors to the interface unit..
Note: Connect control unit or navigator equipment to either interface unit or monitor unit
(supplied by FURUNO).
VGA
monitor
Monitor unit
cable
06S4078
Cut and remove
the covers.
CONT
NMEA
NAV
Control
unit
cable
06S4079
Remove the
fixing metals.
35
Earth
Connect to ship's earth.