Mounting - Furuno CH-250 Installation Manual

1. MOUNTING

Necessary tools and materials
To install the units, prepare the tools and materials shown below.
Name
Wrench
Pipe Wrench
Ball Wrench
Phillips-head
Screwdriver
Socket Driver
Cutter Knife
Nipper
Crimp Tool
Soldering Iron
*: Prepare two pipe wrenches or one pipe wrench and one wrench (M36).
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to coating or plastic
parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.
Necessary Tools
Specification
For M10 (Hex. size 17 mm)
For M20 (Hex. size 30 mm)
For M8 (Hex. size 13 mm)
For M6 (Hex. size 10 mm))
For M36 (Hex. size 55 mm)
55 mm
For M5 (Hex. size 4 mm)
#1
#2
For M4 (Hex. size 7 mm)
-
-
-
-
Qty
2 Recommended: double offset wrench
2
1
1
1*
2*
1 Supplied with the hull unit.
1
1
1
1
1
1 For FV2-4
1 If needed for wiring
1
Remarks