Furuno CH-250 Installation Manual page 29

8. Apply THREE BOND 1104 to the inside of tank guide. And then, fasten tank guide at the
neck* of the main shaft securely with M10X80 bolts.
Bow mark
(white circle)
The Frequency
XXX
is described.
9. Pass the main shaft through shaft sleeve.
10. Pass the main shaft through the shaft retainer at the raise/lower drive unit.
Hex. bolt
(M10x80)
*
Tank guide attachment
Main body flange
19
: Coat with ADHESIVE 1104 200G
Flat washer
Spring washer
Nut
Bow
Align the tank guide with the bow mark
to face toward ship's bow.
Bow mark
Pipe cap
U-nut
Shaft retainer
Spring washer
Hex. bolt M10X35
Bow mark