Furuno CH-250 Installation Manual page 14

5. Fasten the bracket to the mounting base with two upset screws. (Use the upper holes to tilt
the monitor unit 20°; lower holes to tilt it 9°.)
Flush mounting
Flush mounting for unibody (Type: OP06-16, Code no.: 006-556-300)
Name
Fixing metal
Self-tapping screw
Hex. bolt
1. Make holes at the place to mount (W287 x H297).
2. Fasten monitor and control units with the fixing metal (supplied as option) and four hex.
bolts (supplied as option).
3. Fasten the fixing metal assembled at step 2 to holes made at step 1 with six tapping screws
(supplied as option).
HANGER
Upset Screw
Fastening hanger to mounting base
Type
06-021-1311-2 100-279-612-10
5x20 000-162-609-10
M4x12 000-162-939-10
Fixing metal
4
MOUNTING
BASE
Code No. Qty
1
6
4
Hex. Bolts
Remarks